Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Lights And Instruments
Issue:
On certain vehicles, the instrument panel cluster could stop working. As a result, warnings, tell-tales and gauges may not display.
Note: This recall only affects vehicles equipped with a 3.5" instrument cluster panel.
Safety Risk:
Warnings, tell-…
Read the complete source summary
Issue:
On certain vehicles, the instrument panel cluster could stop working. As a result, warnings, tell-tales and gauges may not display.
Note: This recall only affects vehicles equipped with a 3.5" instrument cluster panel.
Safety Risk:
Warnings, tell-tales and gauges that don't display could increase the risk of a crash.
Corrective Actions:
FCA Canada will notify owners by mail and advise you to take your vehicle to a dealership to replace the instrument panel cluster.
Issue:
Under certain conditions, the clutch pressure plate could overheat and break. If this happens, the pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle.
Note: This recall only affects certain …
Read the complete source summary
Issue:
Under certain conditions, the clutch pressure plate could overheat and break. If this happens, the pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle.
Note: This recall only affects certain vehicles equipped with a 3.6 L engine and a manual transmission. Vehicles repaired under FCA Canada recalls Y01, Y03 and Y07 (Transport Canada recall 2021-035) also require this repair.
Safety Risk:
Debris from an overheated and fractured pressure plate could contact nearby parts and increase the risk of a fire. Parts that fall from the vehicle could create a road hazard for others and increase the risk of injury.
Corrective Actions:
FCA Canada will notify owners by mail and advise you to tale your vehicle to a dealership to replace the clutch assembly. The dealer will also inspect and, if necessary, update the instrument panel cluster and powertrain control module software.
Issue:
In certain circumstances, the clutch pressure plate could overheat and break. If this happens, the pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle.
Note: This recall only affects certain v…
Read the complete source summary
Issue:
In certain circumstances, the clutch pressure plate could overheat and break. If this happens, the pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle.
Note: This recall only affects certain vehicles equipped with a 3.6 L engine and a manual transmission.
Safety Risk:
Debris from an overheated and fractured pressure plate could contact nearby parts and increase the risk of a fire. Parts that fall from the vehicle could create a road hazard for others, and increase the risk of injury.
Corrective Actions:
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to update vehicle software. This update will reduce the engine power if the clutch overheats.
Issue:
On certain vehicles, there could be a problem with the front seat belt retractors. As a result, the seat belts may not work as designed in a crash.
Safety Risk:
A seat belt that does not work properly could increase the risk of injury in a crash.
…
Read the complete source summary
Issue:
On certain vehicles, there could be a problem with the front seat belt retractors. As a result, the seat belts may not work as designed in a crash.
Safety Risk:
A seat belt that does not work properly could increase the risk of injury in a crash.
Corrective Actions:
Fiat Chrysler Automobiles will notify owners by mail and instruct you to take your vehicle to a dealer to replace the front seat belts.
Issue:
On certain vehicles, the rearview camera image may be displayed even after the transmission is shifted out of reverse. This could cause a possible distraction for the driver. Canadian regulations require the rearview image to turn off within 10 seconds…
Read the complete source summary
Issue:
On certain vehicles, the rearview camera image may be displayed even after the transmission is shifted out of reverse. This could cause a possible distraction for the driver. Canadian regulations require the rearview image to turn off within 10 seconds after shifting from reverse gear.
Safety Risk:
A driver that is distracted could have an increased risk of a crash.
Corrective Actions:
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to update the radio software.
Issue:
On certain vehicles equipped with a manual transmission, the clutch pressure plate could overheat and break. If this happens, there would be a loss of power to the wheels. A broken pressure plate may also crack or break the transmission case. This coul…
Read the complete source summary
Issue:
On certain vehicles equipped with a manual transmission, the clutch pressure plate could overheat and break. If this happens, there would be a loss of power to the wheels. A broken pressure plate may also crack or break the transmission case. This could cause debris to fall from the vehicle.
Safety Risk:
A sudden of loss power to the wheels could increase the risk of a crash. Additionally, debris from an overheated and fractured pressure plate could contact nearby parts and increase the risk of a fire. Parts that fall from the vehicle could create a road hazard for others, and increase the risk of injury.
Corrective Actions:
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the clutch system, install a protective hose sleeve, reroute a wire harness, and replace components as necessary
Issue:
On certain vehicles, the steering shaft may not have been properly manufactured. This could cause it to separate and cause a loss of steering control.
Safety Risk:
A loss of steering control could create the risk of a crash.
Corrective Actions:
…
Read the complete source summary
Issue:
On certain vehicles, the steering shaft may not have been properly manufactured. This could cause it to separate and cause a loss of steering control.
Safety Risk:
A loss of steering control could create the risk of a crash.
Corrective Actions:
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to inspect, and if necessary, replace the steering column assembly.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Wrangler JL 4X4 A8
X 2.0 L engine
10.0 L/100 km
Data unavailable
Wrangler JL 4X4 A8
X 3.6 L engine
11.8 L/100 km
Data unavailable
Wrangler JL 4X4 M6
X 3.6 L engine
11.8 L/100 km
Data unavailable
Wrangler JL Unlimited 4X4 A8
X 2.0 L engine
10.5 L/100 km
Data unavailable
Wrangler JL Unlimited 4X4 A8
X 3.6 L engine
11.7 L/100 km
Data unavailable
Wrangler JL Unlimited 4X4 M6
X 3.6 L engine
12.2 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2019 Jeep Wrangler, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2024504 (Lights And Instruments). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2023089 (Powertrain). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2021035 (Powertrain). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2019 Jeep Wrangler.
STEERING
448
ELECTRICAL SYSTEM
153
SUSPENSION
134
POWER TRAIN
81
UNKNOWN OR OTHER
64
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-12
4
2026-01
4
2026-02
4
2026-03
6
2026-04
4
2026-05
4
2026-06
9
2026-07
8
2026-08
6
2026-09
10
2026-10
5
2026-11
2
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
327
25,000–49,999 mi
30
50,000–99,999 mi
28
100,000–149,999 mi
10
150,000+ mi
0
Missing or excluded mileage
354
395 of 749 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged10US complaint allegations
Fire flagged11US complaint allegations
Towed flagged14US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
781 matched manufacturer communications · 2 matched investigations. Communications are not necessarily recalls or technical service bulletins.
DP18004 · Frame Weld Deficiencies
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld deficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detachments that were outside of the scope of NHTSA Recall No. 18V-675. Additionally, the information that FCA provided did not adequately address whether frame weld quality deficiencies compromise the structural integrity of vehicles, and therefore may pose an unreasonable risk to motor vehicle safety. Finally, ODI needs to further evaluate the alleged steering-related defects reported through MY 2019 and the alleged defects' relation to weld quality.The petition was granted on September 16, 2019. Preliminary Evaluation PE19-012 has been opened to further assess the scope, frequency, and potential safety-related consequences of alleged weld quality deficiencies and steering related concerns on the MY 2018-2019 'JL' Jeep Wrangler vehicles.The ODI reports cited above can be viewed on NHTSA.gov under the following reference numbers:11234967, 11222390, 11219370, 11217080, 1204905, 11179954, 11171786, 11161243, 11155523, 11153044, 11143617, 11142722, 11142426, 11141336, 11141035, 11140637, 11140344, 11140262, 11140085, 11140057, 11139880, 11139866, 11139557, 11139467, 11139436, 11138974, 11138758, 11138757, 11132030, 11129738, 11129667, 11124312, 11120232, 11119676, 11119650, 11119454, 11119450, 11115658, 11115137, 11113029, 11112515, 11110583, 11109903, 11093172, 11088501, 11076098
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance.NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.