Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Structure
Issue:
On certain vehicles, the exterior A-pillar trim on either side of the windshield may not be properly attached. As a result, the trim(s) could loosen and separate from the vehicle.
Safety Risk:
Trim that detaches from the vehicle could create a road…
Read the complete source summary
Issue:
On certain vehicles, the exterior A-pillar trim on either side of the windshield may not be properly attached. As a result, the trim(s) could loosen and separate from the vehicle.
Safety Risk:
Trim that detaches from the vehicle could create a road hazard for others and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the A-pillar trim.
Issue:
On certain vehicles that have had one (or both) of the rear wheel knuckle(s) replaced, the outer ball joint for the rear suspension toe link may seize. If this happens, the toe link could break while driving. This could cause a sudden loss of vehicle s…
Read the complete source summary
Issue:
On certain vehicles that have had one (or both) of the rear wheel knuckle(s) replaced, the outer ball joint for the rear suspension toe link may seize. If this happens, the toe link could break while driving. This could cause a sudden loss of vehicle stability.
Note: This recall only affects vehicles equipped with a rear ball joint manufactured by ZF.
Safety Risk:
A loss of vehicle stability could cause a loss of control and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to inspect if it has had ball joints installed to replace the original bushings in the rear suspension. If so, the ball joints will be inspected. If a ball joint requires replacement, the dealer will replace the rear suspension knuckle and toe link, as necessary.
Issue:
On certain vehicles, the outer ball joint for the rear suspension toe link may seize. If this happens, the toe link could break while driving. This could cause a sudden loss of vehicle stability.
Note: This recall only affects vehicles equipped with a…
Read the complete source summary
Issue:
On certain vehicles, the outer ball joint for the rear suspension toe link may seize. If this happens, the toe link could break while driving. This could cause a sudden loss of vehicle stability.
Note: This recall only affects vehicles equipped with a rear ball joint manufactured by ZF.
Safety Risk:
A loss of vehicle stability could cause a loss of control and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rear suspension toe links and inspect the ball joints. If a ball joint requires replacement, the dealer will replace the rear suspension knuckle.
Issue:
On certain vehicles, the outer ball joint for the rear suspension toe link may seize. If this happens, the toe link could break while driving. This could cause a sudden loss of vehicle stability.
Safety Risk:
A loss of vehicle stability could cause …
Read the complete source summary
Issue:
On certain vehicles, the outer ball joint for the rear suspension toe link may seize. If this happens, the toe link could break while driving. This could cause a sudden loss of vehicle stability.
Safety Risk:
A loss of vehicle stability could cause a loss of control and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the ball joints for the rear suspension toe links. If a ball joint requires replacement, the dealer will replace the rear suspension knuckle.
Issue:
On certain vehicles, the rear suspension toe link(s) could break. This could cause a sudden loss of vehicle stability. Note: This problem is more likely to occur on vehicles that are driven on rough roads.
Safety Risk:
A loss of vehicle stability c…
Read the complete source summary
Issue:
On certain vehicles, the rear suspension toe link(s) could break. This could cause a sudden loss of vehicle stability. Note: This problem is more likely to occur on vehicles that are driven on rough roads.
Safety Risk:
A loss of vehicle stability could cause a loss of control and increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct them to take their vehicle to a dealer to install improved rear suspension toe links.
On certain vehicles operated in Alberta, Saskatchewan and Manitoba, soil properties unique to these areas could cause an accumulation of soil to occur at the attachment point of the rear suspension toe link. This could impede the toe link's travel, causing ben…
Read the complete source summary
On certain vehicles operated in Alberta, Saskatchewan and Manitoba, soil properties unique to these areas could cause an accumulation of soil to occur at the attachment point of the rear suspension toe link. This could impede the toe link's travel, causing bending stresses and potential fracture. A fractured toe link would affect vehicle handling and could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the toe links with revised parts.
On certain vehicles, the return spring within the interior door handle assembly could become unseated, resulting in an interior handle that does not return to the fully stowed position after actuation. This could allow a door to unlatch during a side impact c…
Read the complete source summary
On certain vehicles, the return spring within the interior door handle assembly could become unseated, resulting in an interior handle that does not return to the fully stowed position after actuation. This could allow a door to unlatch during a side impact crash, which could increase the risk of injury to a seat occupant. Correction: Dealers will inspect, and repair or replace the interior handles as necessary.
On certain vehicles, a fault in the Electric Power Steering (EPS) system could result in an immediate loss of power steering assist without warning to the driver. This would unexpectedly increase the steering effort force necessary to steer the vehicle at lowe…
Read the complete source summary
On certain vehicles, a fault in the Electric Power Steering (EPS) system could result in an immediate loss of power steering assist without warning to the driver. This would unexpectedly increase the steering effort force necessary to steer the vehicle at lower vehicle speeds, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will affect repairs as necessary and will reprogram the EPS controller with updated software. In the event that an EPS fault occurs, this updated software would allow for continued EPS function while displaying visual and audible warnings to the driver until the end of the drive cycle.
On certain vehicles, the child safety lock actuation cam may have been manufactured incorrectly. As a result, the child lock may inadvertently disengage, which could allow the rear door to be opened using the inside door handle, possibly resulting in injury. …
Read the complete source summary
On certain vehicles, the child safety lock actuation cam may have been manufactured incorrectly. As a result, the child lock may inadvertently disengage, which could allow the rear door to be opened using the inside door handle, possibly resulting in injury. Correction: Dealers will inspect the child safety lock and, if necessary, replace the door latch assembly. In the interim, drivers that have a need to use the child lock feature are advised to check the child lock to ensure it is in the ON position before each use.
On certain vehicles, the fuel delivery module may develop a crack which could allow fuel to leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the…
Read the complete source summary
On certain vehicles, the fuel delivery module may develop a crack which could allow fuel to leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel delivery module.
On certain vehicles, the fuel tank may have been manufactured incorrectly. As a result, some of the fuel tanks may not provide the expected strength in the event of an impact, and may leak. A fuel leak may also occur even in the absence of an impact. A fuel le…
Read the complete source summary
On certain vehicles, the fuel tank may have been manufactured incorrectly. As a result, some of the fuel tanks may not provide the expected strength in the event of an impact, and may leak. A fuel leak may also occur even in the absence of an impact. A fuel leak in the presence of an ignition source may result in a fire, increasing the risk of injury and/or damage to property. Correction: Dealers will inspect and, if necessary, replace the fuel tank.
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label identifies the vehicle type as "TRU/CAM" instead of "MPV/VTUM". Correction: Due to the inconsequential nature of this non-compliance, no action will …
Read the complete source summary
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label identifies the vehicle type as "TRU/CAM" instead of "MPV/VTUM". Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Explorer A6
X 2.0 L engine
10.2 L/100 km
Data unavailable
Explorer FFV AS6
X 3.5 L engine
11.9 L/100 km
Data unavailable
Explorer FFV AS6
E 3.5 L engine
15.9 L/100 km
Data unavailable
Explorer FFV AWD AS6
X 3.5 L engine
12.5 L/100 km
Data unavailable
Explorer FFV AWD AS6
E 3.5 L engine
16.7 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Explorer · A6 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
2.0 L
Cylinders
4
City fuel consumption
11.8 L/100 km
Highway fuel consumption
8.3 L/100 km
Tailpipe CO₂ emissions
235 g/km
Explorer FFV · AS6 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
13.7 L/100 km
Highway fuel consumption
9.7 L/100 km
Tailpipe CO₂ emissions
274 g/km
Explorer FFV · AS6 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
18.3 L/100 km
Highway fuel consumption
12.9 L/100 km
Tailpipe CO₂ emissions
254 g/km
Explorer FFV AWD · AS6 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
14.3 L/100 km
Highway fuel consumption
10.3 L/100 km
Tailpipe CO₂ emissions
288 g/km
Explorer FFV AWD · AS6 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
18.9 L/100 km
Highway fuel consumption
13.9 L/100 km
Tailpipe CO₂ emissions
267 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2013 Ford Explorer, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2024026 (Structure). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2021587 (Suspension). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2021438 (Suspension). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2013 Ford Explorer.
STEERING
837
STRUCTURE
439
UNKNOWN OR OTHER
345
ENGINE
226
ELECTRICAL SYSTEM
163
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-12
5
2026-01
5
2026-02
7
2026-03
15
2026-04
5
2026-05
5
2026-06
9
2026-07
4
2026-08
4
2026-09
4
2026-10
2
2026-11
2
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
199
25,000–49,999 mi
218
50,000–99,999 mi
596
100,000–149,999 mi
360
150,000+ mi
164
Missing or excluded mileage
702
1,537 of 2,239 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged44US complaint allegations
Fire flagged11US complaint allegations
Towed flagged85US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
24 matched manufacturer communications · 6 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA15005 · Front Brake Hose Failure
On April 29, 2015, the Office of Defects Investigation (ODI) opened PE15-017 to investigate a report alleging incidents of front brake hose failure in model year (MY) 2015 Ford Explorer Police Interceptor vehicles used by the Sacramento Police Department in its pursuit driving training program (VOQ 10705832).On September 28, 2015, ODI upgraded the investigation to an Engineering Analysis (EA15-005) to assess maximum front caliper crimp temperatures under various test conditions, test hose assemblies removed from police interceptor service for any signs of thermal degradation, and further assess field data for evidence of a defect trend related to the alleged defect.The alleged defect results from exposure to extremely high heat at the caliper-side hose crimp. NHTSA?s vehicle testing suggests that the conditions necessary to produce the critical temperatures in the subject components result from drive-soak intervals that can occur during the Sacramento training program.NHTSA's testing of hose assemblies returned from police interceptor service did not identify any evidence of thermal degradation.NHTSA has not confirmed any incidents of caliper crimp failures due to overheating in vehicles not subjected to the Sacramento training course driving.The low number of hose assembly failure reports and the absence of any verified incidents of heat related front brake hose crimp failures since 2015 suggests that the Sacramento PD incidents resulted from conditions unique to the training program.A safety related defect trend has not been identified at this time and further use of Agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The Agency will take further action if warranted by the circumstances.For additional information, see the Closing Report in the document file for EA15-005 on www.nhtsa.gov.
During the EA17-002 investigation, the agency reviewed and analyzed reports of exhaust odors in the passenger cabins of Model Year 2011 to 2017 Ford Explorers. This investigation required an approach that incorporated knowledge and expertise from the automotive, medical, environmental health, and occupational safety fields. The agency conducted an in-depth investigation that encompassed the review of over 6,500 consumer complaints, conducting field inspections, and testing the relevant vehicles, both independently and in coordination with Ford and other entities. During the investigation, the evolution of Ford service bulletins intended to reduce the level of exhaust odors and carbon monoxide (CO) entering the occupant compartment was examined and independent tests to evaluate the effectiveness of the final Field Service Actions (FSA) for both consumer and police vehicles were conducted. As part of the investigation, the agency also examined the effects of cracked exhaust mani-cats on the measured CO levels in the vehicles and tested the FSA repairs to ensure they did not adversely impact occupant compartment CO levels due to cracked mani-cats.The investigation identified upfitting issues for Police Interceptor vehicles. Upfitting (sirens, lights, cages, auxiliary power, etc.) is typically performed by governmental fleet operations, independent repair facilities, or local Ford dealers after the sale of the new vehicle. Sealing issues caused by upfitting were responsible for the highest measured carbon monoxide levels in tested vehicles. The police FSA instructs how to inspect the quality of the vehicle upfits and how to properly seal any leaks caused by these upfits, at no cost to the police agency. Similarly, the highest CO levels measured in consumer vehicles were usually traced to sealing issues caused by rear crash damage where the repairs did not ensure sealing integrity. The most recent Ford FSA procedure for both the police (17B25) and consumer vehicles (17N03) includes an HVAC reprogramming operation. Tests by Ford and NHTSA have demonstrated a substantial reduction of CO levels due solely to the HVAC reprogramming. Other FSA repairs also demonstrated measurable contributions to CO level reductions during controlled tests.Throughout the investigation, vehicles accurately measured with higher levels of carbon monoxide were almost always affected by upfitter alterations, damage, or other causes compromising rear passenger cabin seals.NHTSA received thousands of reports alleging odors which triggered a variety of physiological responses, predominately nausea, headaches, and lightheadedness. NHTSA focused the investigation on accurately measuring vehicle CO levels, and accurately measuring carboxyhemoglobin (COHB) levels from properly administered blood tests. Using rigorous test methods to produce exhaust gas intrusion in vehicles with a properly performed FSA, occupant compartment CO levels remained below current environmental limits for CO in any environment (EPA ambient air quality standards). Furthermore, even without FSA repairs, no vehicles unaffected by upfitter issues or prior crash damage were identified with CO levels that exceed accepted occupational CO exposure levels. This investigation finds that the 2011-2017 Ford Explorer vehicles when accurately measured produce occupant compartment CO levels which fall below current accepted health standards, and could not identify COHB levels for vehicle drivers or other occupants, which exceeded thresholds for acute physiological effects. Therefore, the agency has not identified a defect that represents an unreasonable risk to motor vehicle safety.This inve
On May 27, 2014 and amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist in approximately 179,027 model year (MY) 2011 through 2013 Ford Explorer vehicles equipped with electric power assisted steering (EPAS), including 82,328 MY 2011 Explorersthat are the subject of PE12-017.Ford has assigned the recall number 14S06.The NHTSA recall number is 14V-286.Ford's DIR indicates that loss of power steering assist while driving would require higher steering effort at lower vehicle speeds, which may result in an increased risk of a crash.Sudden loss of power steering assist while driving can occur in the subject vehicles if the system loses electrical power or whenever the system detects a fault that requires it to enter fail-safe mode, which removes power from the EPAS motor and defaults to manual steering.Ford's DIR indicates that the majority of steering assist failures in the recalled vehicles have been caused by an intermittent electrical connection in the Power Steering Control Module (PSCM) that can lead to a loss of the motor position sensor signal.Ford's remedy instructs dealers to check the PSCM for diagnostic trouble codes (DTC).If upon initial inspection a loss of steering assist DTC is present, dealers will replace the steering gear at no charge to the owner and update the PSCM with revised software.Following detection of a motor position sensor signal fault, the revised software will provide audible and visual warnings to the driver that a power steering system fault has been detected and will maintain steering assist for the remainder of that drive cycle.If no DTC is present, dealers will reprogram the PSCM with the revised software. Analysis of information from all sources identified a total of 969 complaints and 4,059 warranty claims related to loss of power steering assist while driving in the MY 2011 through 2012 Explorer vehicles, resulting in a complaint rate of 5.4 incidents per thousand vehicles and a warranty claim rate of 2.3 percent.ODI identified 15 crashes with evidence indicating loss of power steering assist may have been a factor.All 15 crashes involved low-speed impacts with roadside objects during turning maneuvers, resulting in minor vehicle damage or no damage.In one incident that occurred in a low-speed curve, the driver attempted to brake in response to the sudden increase in steering effort and inadvertently applied the accelerator pedal instead.This caused the vehicle to run off the side of the road and strike a wooden pole at approximately 15 mph.Another incident occurred when the driver was unable to to negotiate a left-turn at an intersection and ran off the road into a shallow ditch, resulting in moderate front-end damage to the vehicle and minor injuries to the driver that did not require medical treatment. This investigation is closed.All ODI complaints associated with this closing resume are listed in the Attachment 1.
The Office of Defects Investigation (ODI) opened PE14-027 based on a report of 13 front brake hose (jounce hose) failures in 11 vehicles in the District of Columbia Metropolitan Police Department (DCMPD) fleet of 46 model year (MY) 2013 Ford Explorer Police Interceptor (PI) vehicles (VOQ 10621634).The DCMPD fleet provided Ford with 71 jounce hoses for analysis, including 4 of the 13 failed hoses.Inspection of each of the failed hoses identified a small tear in the outer cover on the body end of the hoses on the outboard side. Ford?s lab analysis of these hoses identified splits in the inner liners 1.5-2.0mm from the end of the nipple (outside of the crimped ferrule joint).Ford conducted pressure testing of 10 randomly selected samples of the remaining 67 hoses that had not experienced leaks and 9 of the samples leaked at 6,000 psi.Ford?s examination of the 9 hoses that leaked in the pressure tests found 4 that failed on the outboard side of the hose (similar to the 4 leaking field parts) and 5 that failed on the body end of the hose on the inboard side.Four additional non-leaking hoses were sent to the hose supplier, Hitachi, for analysis.Broken yarn was observed in scanning electron microscope examinations at both the body side and caliper side hose to ferrule crimps, indicating severe bending stress had occurred at these locations. Hitachi supplied an additional set of non-leaking field return hoses and a brand new set of hoses to an outside laboratory (Element Materials Technology) for analysis.The lab did not identify any manufacturing or material deficiencies in the hoses and concluded that the hose failures were caused by excessive bending stresses.Based on the examinations of the returned jounce hoses, Ford conducted durability testing on new hoses that were the same design as those found on the subject vehicles.Ford first determined the worst case conditions for the hoses; jounce bumpers removed, internal rebound stops fully compressed, and shock absorbers attached. With the jounce hose installed, the steering was rotated to the maximum turn angle while the suspension was translated from full jounce to full rebound.This determined the maximum hose length of 13.0in (331mm) and a minimum hose bending radius of 1.6in (40mm).Using these conditions hoses tested on a Suspension Motion Simulator far surpassed Ford?s performance specifications. Twenty (20) complaints of front brake jounce hose failure were identified on a total of 18 Explorer PI vehicles, including the 13 hose failures in 11 vehicles from the DCMPD fleet that prompted PE14-027.The remaining 7 complaints included 3 from one fleet that reportedly occurred on the banjo block end of the hose assembly and single complaints from 4 other fleets.Only two brake hose assemblies were used in the subject and peer Explorer vehicles, with the BB53 level hose used until June 20, 2012, and an updated DB53 level hose used thereafter.No pattern of failures was observed by hose assembly, with 15 of failures involving the BB53 hose assembly (including the 13 from DCMPD manufactured in March 2012) and 5 the DB53 hose assembly built after June 20, 2012. No root cause was determined for the reported Explorer PI jounce hose failures, but Ford identified improper service repair procedures (e.g., hanging the brake caliper from the brake hose during brake pad replacement) as a possible contributor to higher than expected rate of front brake jounce hose leaks. ODI?s analysis of field data, hose inspection and test data did not identify evidence of any defects in hose material, manufacture or vehicle installation.The closing of this invest
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.