UNITED STATES · VEHICLE RESEARCH

2015 Porsche 918 Spyder

Reported problems, recalls & official records

Two SeatersAll-Wheel Drive1 source configurations

Evidence updated Nov 17, 2026 · Sources

PorschePorsche 918 Spyder model-family photograph; generation, year and trim may differ
Model-family image · year, generation and trim may differ.Photo: Thomas Wolf, www.foto-tw.de · CC BY-SA 3.0 de
5Recall campaignsNHTSA · official notices
0US owner complaintsNHTSA · unverified reports
405US communicationsNHTSA · received 2020–2026
Source-ledResearch approachNo unsupported reliability grades
FROM RESEARCH TO YOUR NEXT CAR

2015 Porsche 918 Spyder for sale

Explore matching dealer listings in United States. USD prices · miles.

Search listings
Show matching dealer listings

Open this section to check available listings. No listing request is made until you open it.

Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.

Reported Problem Categories

US NHTSA complaints for the 2015 Porsche 918 Spyder.

No exact make/model/year complaint matches in this US dataset snapshot. This does not establish that no problems occurred.

At a Glance

Source configurations, without assumed specifications.

Research marketUnited States
Model year2015
Vehicle classTwo Seaters
DriveAll-Wheel Drive
TransmissionAutomatic (AM-S7)
Recall sourceNHTSA
Efficiency configurations1
VIN repair statusCheck with manufacturer
View source specifications

Safety Recalls (5)

US campaigns received since 2010; not a complete lifetime recall history, including historical or superseded records.

SUSPENSION:FRONT:CONTROL ARM

Porsche Cars North America, Inc. (Porsche) is recalling certain 2015 Porsche 918 Spyder vehicles. The connecting shafts of the longitudinal and transverse control arms may fail due to stress corrosion cracking, impacting vehicle handling.

NHTSA 18V287000 · May 3, 2018Official notice ↗
Safety consequence & remedy

Consequence: If the control arm connecting shafts crack, affecting vehicle handling, it can increase the risk of a crash.

Remedy: Porsche will notify owners, and dealers will replace the longitudinal and transverse control arms, free of charge. The recall began on September 6, 2018. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AJ04.

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 918 Spyder vehicles manufactured November 6, 2013, to July 27, 2015. The affected vehicles have front lower control arms that may crack at the ball joint.

NHTSA 16V885000 · Dec 9, 2016Official notice ↗
Safety consequence & remedy

Consequence: A cracked lower control arm may affect vehicle handling, increasing the risk of a crash.

Remedy: Porsche will notify owners, and dealers will replace the lower control arms, free of charge. The recall began on February 20, 2017. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AG09.

SEAT BELTS:FRONT:ANCHORAGE

Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 Porsche 918 Spyder Hybrid Electric vehicles manufactured February 2, 2015 through July 1, 2015. In the affected vehicles, incorrect screws might have been used when re-installing …

Read the complete source summary

Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 Porsche 918 Spyder Hybrid Electric vehicles manufactured February 2, 2015 through July 1, 2015. In the affected vehicles, incorrect screws might have been used when re-installing and/or re-securing the seat belt mount or the seat belt reel during vehicle service.

NHTSA 16V520000 · Jul 8, 2016Official notice ↗
Safety consequence & remedy

Consequence: In the event of a crash, the incorrect bolts may not keep the seat belts properly anchored to the car, increasing the risk of injury to the seat occupants.

Remedy: Porsche will notify owners, and dealers will inspect, and as necessary, replace the seat belt mount and seat belt reel attaching bolts, free of charge. The recall began October 18, 2016. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AG04.

ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY

Official advisory: PARK OUTSIDE. Check the current NHTSA notice.

Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 918 Spyder vehicles manufactured February 25, 2014, to April 29, 2015. In the affected vehicles, the wiring harness for the left rear radiator fan may contact an engine heat insul…

Read the complete source summary

Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 918 Spyder vehicles manufactured February 25, 2014, to April 29, 2015. In the affected vehicles, the wiring harness for the left rear radiator fan may contact an engine heat insulation plate.

NHTSA 15V335000 · Jun 1, 2015Official notice ↗
Safety consequence & remedy

Consequence: If the harness contacts the insulation plate, the harness may chafe and result in an electrical short which could increase the risk of a fire.

Remedy: Porsche will notify owners, and dealers will inspect the wiring harness and secure it to a coolant tube using a tie-wrap clip, free of charge. The recall began on July 13, 2015. Owners may contact Porsche customer service at 1-800-767-7243. Porche's number for this recall is AF05. Note: The wiring harness could short and result in a fire even when the vehicle is unattended. As a precaution, owners are advised to park outside until the remedy has been made.

SUSPENSION:REAR

Porsche Cars of North America, Inc. (Porsche) is recalling certain model year 2015 918 Spyder vehicles manufactured May 7, 2014, to June 18, 2014. The affected vehicles may have been manufactured with rear-axle control arms that may break, causing difficulty …

Read the complete source summary

Porsche Cars of North America, Inc. (Porsche) is recalling certain model year 2015 918 Spyder vehicles manufactured May 7, 2014, to June 18, 2014. The affected vehicles may have been manufactured with rear-axle control arms that may break, causing difficulty controlling the vehicle.

NHTSA 14V457000 · Jul 28, 2014Official notice ↗
Safety consequence & remedy

Consequence: If the control arms break, the driver may lose control of the vehicle, increasing the risk of a crash.

Remedy: Porsche will notify owners, and dealers will inspect and replace the control arms, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AE03.

Reports Over Time

US complaints by filing month, latest 12 observed months.

No supported complaint timeline available.

Compare Model Years

Explore documented Porsche 918 Spyder records.

Totals reflect different time on the road and configurations. Fewer reports do not establish greater reliability.

Compare vehicles side by side →

RECHECK EVIDENCE LAB

Your vehicle’s evidence passport

What to investigate first for the 2015 Porsche 918 Spyder.

Official advisory: PARK OUTSIDE. Check campaign 15V335000 and VIN applicability ↗

1. Check recall repairs

5 matched US recall campaigns. Start with the notices below and confirm applicability and repair completion for your VIN.

Review all 5 matched campaigns →

2. Know the reported themes

No exact make/model/year complaint matches in this US dataset snapshot. This does not establish that no problems occurred.

Take a tailored checklist to your mechanic →
Coverage, sources and what remains unknown
Recall source
US NHTSA
Matched campaigns
5
US complaint records
0
Efficiency configurations
1
US investigations
1
Repair completion
Not established

Coverage boundary: US campaigns received since 2010; not a complete lifetime recall history Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.

Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.

Specifications & Efficiency

Official source configurations. No trim is assumed.

Source configurationFuel / powertrainCombined efficiencyRange
918 Spyder
Automatic (AM-S7)
Premium Gas or Electricity All-Wheel Drive50.0 kWh/100 mi420 mi

Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.

More from the official configuration records

Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.

918 Spyder · Automatic (AM-S7) · All-Wheel Drive — source specification details
Vehicle classTwo Seaters
DriveAll-Wheel Drive
TransmissionAutomatic (AM-S7)
Tailpipe CO₂ emissions277.0 g/mi

Bulletins & Investigations

US official records; applicability in Canada is not established.

405 matched manufacturer communications · 1 matched investigations. Communications are not necessarily recalls or technical service bulletins.

EA21002 · Desiccated Air Bag Inflator Rupture

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Opened 20210917 · No closure date in source

Official investigation archive ↗
Communication 11039499

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11039498

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11039497

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11039496

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11039494

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11037868

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11037816

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11037813

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗

Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.

Before You Buy

Questions to take to a seller or qualified mechanic.

  • Verify the VIN and ask the manufacturer to confirm applicability and completion of recall repairs.
  • Ask for documentation related to the official SUSPENSION:FRONT:CONTROL ARM campaign (18V287000).
  • Ask for documentation related to the official SUSPENSION:FRONT:CONTROL ARM:LOWER ARM campaign (16V885000).
  • Ask a mechanic to investigate any symptoms associated with reported categories; complaints alone are not a diagnosis.
  • Review service records and arrange an independent pre-purchase inspection.
Read the complete inspection checklist →
RECHECK EVIDENCE LAB

Take this to your mechanic

A research brief for the 2015 Porsche 918 Spyder, built from this report.

  1. Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
  2. Ask for repair documentation for campaign 18V287000 (SUSPENSION:FRONT:CONTROL ARM). A model-year match does not establish that this VIN is affected.
  3. Ask for repair documentation for campaign 16V885000 (SUSPENSION:FRONT:CONTROL ARM:LOWER ARM). A model-year match does not establish that this VIN is affected.
  4. Ask for repair documentation for campaign 16V520000 (SEAT BELTS:FRONT:ANCHORAGE). A model-year match does not establish that this VIN is affected.
  5. Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.

Sources & Last Updated

Trace the evidence behind this report.

NHTSA recall campaigns · Original source · Retrieved Nov 17, 2026
US NHTSA complaints · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.
US EPA FuelEconomy.gov · Efficiency dataset
US communications & investigations · Official datasets · Communications received 2020–2026, exact matches; investigations full-history export.