Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Heater And Defroster
Issue:
Volkswagen Group Canada is conducting a parts recovery campaign targeting 2012-2016 Volkswagen vehicles equipped with a TDI (diesel) engine built between May 25, 2011 and June 1, 2016. The auxiliary heater elements are being recovered to aid in Volkswa…
Read the complete source summary
Issue:
Volkswagen Group Canada is conducting a parts recovery campaign targeting 2012-2016 Volkswagen vehicles equipped with a TDI (diesel) engine built between May 25, 2011 and June 1, 2016. The auxiliary heater elements are being recovered to aid in Volkswagen's analysis in support of Transport Canada defect investigation file no. 3280-15-10.
Note: This action is not being conducted under the requirements of the Motor Vehicle Safety Act. For the 2016 model year Jetta, only the Jetta Hybrid model is involved in this parts recovery program.
Safety Risk:
No safety defect has been identified with these auxiliary heater elements.
Corrective Actions:
Volkswagen will notify owners by mail and advise them to take their vehicle to a dealership to replace the auxiliary heater element at no charge.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force tha…
Read the complete source summary
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the driver frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes the Volkswagen brand vehicles subject to recall 2016-064 (Volkswagen Recall 69M9). Volkswagen vehicles completed under the previous 2016-064 recall require repair under this recall, as the previous recall remedy was an interim repair. Interim repair parts must be replaced with final repair parts.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing t…
Read the complete source summary
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver airbag inflator. Note: This campaign only affects the Audi A5 and Audi S5 Cabriolet models.
On certain vehicles, the steering wheel clock spring could become contaminated with long hair or long fibers which may cause a displacement of the internal guide loops. When the guide loops are dragged out of position, they may apply tension to the internal f…
Read the complete source summary
On certain vehicles, the steering wheel clock spring could become contaminated with long hair or long fibers which may cause a displacement of the internal guide loops. When the guide loops are dragged out of position, they may apply tension to the internal flat cable and cause it to tear. Should the cable tear, the electrical connection to the driver's front airbag may be lost, causing the airbag monitoring indicator light to illuminate. Failure of the driver's airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will install a cover of a different design to help prevent clock spring contamination caused by hair or other fibers. In instances where the vehicle has an airbag light on (and diagnosis confirms the steering wheel clock spring requires replacement), dealers will install a new steering wheel clock spring.
On certain vehicles equipped with a 2.0L TDI diesel engine, the fuel injection lines could crack. Diesel fuel leakage may ignite on a hot engine surface and cause a fire, which could result in property damage and/or personal injury. Correction: Dealers will …
Read the complete source summary
On certain vehicles equipped with a 2.0L TDI diesel engine, the fuel injection lines could crack. Diesel fuel leakage may ignite on a hot engine surface and cause a fire, which could result in property damage and/or personal injury. Correction: Dealers will install vibration dampers on all four fuel injection lines. Additionally, on some vehicles (depending on the date of manufacture) the #2 fuel injection line will be replaced.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Golf TDI (modified) AS6
D 2.0 L engine
7.4 L/100 km
Data unavailable
Golf TDI (modified) M6
D 2.0 L engine
7.3 L/100 km
Data unavailable
Golf AS6
X 2.5 L engine
9.2 L/100 km
Data unavailable
Golf M5
X 2.5 L engine
9.5 L/100 km
Data unavailable
Golf R M6
Z 2.0 L engine
10.8 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2012 Volkswagen Golf, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2024648 (Heater And Defroster). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2018111 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2016064 (Airbag). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2012 Volkswagen Golf.
ENGINE
11
AIR BAGS
10
POWER TRAIN
9
FUEL/PROPULSION SYSTEM
8
FUEL SYSTEM, DIESEL
7
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
17-06
17-07
17-08
18-07
18-10
18-11
19-07
19-10
21-06
22-05
25-09
26-05
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2017-06
1
2017-07
1
2017-08
1
2018-07
1
2018-10
1
2018-11
1
2019-07
1
2019-10
1
2021-06
1
2022-05
1
2025-09
1
2026-05
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
21
25,000–49,999 mi
8
50,000–99,999 mi
7
100,000–149,999 mi
2
150,000+ mi
0
Missing or excluded mileage
10
38 of 48 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged4US complaint allegations
Fire flagged0US complaint allegations
Towed flagged1US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
307 matched manufacturer communications · 5 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA11003 · High-Pressure Fuel Pump Failure
The Office of Defects Investgation (ODI) opened EA11-003 on February 7, 2011, based on 160 complaints to ODI and Volkswagen involving high pressure fuel pump (HPFP) failures in model year (MY) 2009 through 2010 Volkswagen Jetta and Golf and Audi A3 TDI vehicles and questions regarding fuel sample results provided by Volkswagen as part of its response to PE10-034.During EA11-003, ODI analyzed design information, field experience and test data for MY 2009 through 2012 Volkswagen Jetta, Golf and Touareg and Audi A3 and Q7 vehicles equipped with TDI engines. Volkswagen has not identified any design or manufacturing defects in the subject TDI Clean Diesel pumps and has stated that the subject pumps were designed, tested and approved for use in the United States market, with substantial design margins for fuels that are out of specification.Volkswagen believes that misfueling with gasoline is the primary cause of HPFP drivetrain failures in the field.Only the Q7 vehicles were built with misfuel protection devices.In May 2013 Volkswagen initiated a service campaign to install misfuel protection devices in all MY 2009 through 2012 Jetta, Golf and A3 vehicles.Volkswagen implemented misfuel protection devices in all of the subject models beginning in MY 2013. ODI?s analysis of HPFP drivetrain failure incidents indicates that most failures do not result in engine stall while driving and, when pump drivetrain failure does result in stall while driving, it is usually preceded by numerous warning symptoms (e.g., glow plug warning lamp, chime, limp mode, and driveability symptoms).The failure data for the subject vehicles show relatively low stalling rates (less than one percent at three years in service) for each of the pump designs used in the subject vehicles.There have been no reports of crashes, injuries or fatalities related to the alleged defect. Based on these facts, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.For additional information, see the closing report in the document file for EA11-003.
In August 2015, VW launched Safety Recall 15V-483 to address the loss of the protection provided by the front driver air bag in several models due to the failure of the clock spring. VW’s recall indicated that debris entry into the steering wheel hub can result in the contamination and ultimately failure of the clock spring in 2010-2014 MY CC, Eos, GTI, Golf, Jetta, Jetta Sportwagen, Passat, and Tiguan models. The contamination of the clock spring by debris, such as human hair, can cause the flat ribbon cable to tear. This results in the loss of the electrical connection to the front driver air bag and any steering wheel mounted controls. The clock spring is designed so that the flat cable inside will break with minimum force to prevent it from impeding movement of the steering wheel. The loss of the electrical connection to the front driver air bag results in the immediate illumination of the air bag warning light and prevents the deployment of the front driver air bag in a collision of sufficient severity. A torn clock spring also causes audible grinding noises from the area of the steering wheel/driver air bag or steering column while steering. The failure of the clock spring does not impair vehicle control or drivability (steering, brakes, acceleration). In November 2017, the Office of Defects Investigation (ODI) opened Recall Query RQ17009 after receiving complaints that alleged the failure of the clock spring in the subject models. While the majority of these complaints involved vehicles excluded from the original recall, several complaints involved vehicles that had received the remedy for Recall 15V-483. On April 18, 2018, ODI upgraded the investigation to Engineering Analysis EA18003 after receiving additional complaints concerning the recall remedy and scope of Recall 15V-483. During the investigation, VW identified certain 2015-2018 MY vehicles that share a common steering wheel clock spring with the vehicles covered under Recall 15V-483. VW began using a different clock spring design starting with the 2019 MY Jetta. This new part is not compatible with previous model years due to the communication properties between the clock spring and the vehicle, including the air bag control module. In October 2018, VW released Warranty Extensions AWA-18-18 and VWP-18-11, which established a 15-year, unlimited mileage coverage for the Steering Wheel Clock Spring for vehicles included in the scope of Recall 15V-483. For certain 2010-2018 MY vehicles outside of the recall scope, a 10-year, 120,000-mile coverage was given. Vehicles repaired under these warranty extensions receive replacement clock springs at no charge to the consumer. In early 2023, VW updated AWA-18-18 (now AWA-23-01) and VWP-18-11 to upgrade certain vehicles and model years from the 10-year, 120,000-mile coverage to the 15-year, unlimited mileage coverage option. These warranty extensions cover vehicles with recall remedy failures as well as vehicles outside of the Recall 15V-483 scope that exhibited similar failures. In view of the circumstances, including the high detectability of the subject failure and warranty extensions issued by VW, ODI is closing this Engineering Analysis. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
By letter dated October 3, 2011, Volkswagen Group of America, Inc. (VW) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall to address a defect in approximately 168,275 model year (MY) 2009-2012 Volkswagen Jetta, Jetta Sportwagen, Golf, and Audi A3 vehicles equipped with the 2.0L TDI Common Rail Clean Diesel engine (NHTSA Recall No. 11V-490).The recalled Jetta and Jetta Sportwagen vehicles were built from May 2008 through September 2011, the Golf vehicles were built from May 2009 through September 2011, and the Audi A3 vehicles were built from September 2009 through September 2011.According to Volkswagen, in U.S. applications of the above cited TDI vehicles including engine codes CJAA and CBEA, the fuel injection pulses could coincide with the natural frequency of the injector line #2 in specific load and RPM conditions.This resonance creates additional stress on the fuel line which a small number of parts (based on the statistic spread of line strength) cannot withstand over its lifetime.As a contributing factor, VW indicated that a supplier used tube material with scratch marks from a grinding process during certain production periods.Lines manufactured in these periods were installed in vehicles produced in the following 10 months:December 2008, January-February 2009, October 2009, March-April 2010 and September-December 2010.Injector lines using this material exhibit a significantly higher failure rate.Dealers will replace injector line #2 in all vehicles built in these months.In addition, as a precautionary measure, all recalled vehicles will have vibration dampers installed on all four fuel injector lines.Analysis of NHTSA complaints, VW complaints, VW field reports and warranty claims found allegations of injector line leakage in 443 subject vehicles.The leaking line was not identified in 62 of the vehicles.For the 381 that did provide information about which injector lines were leaking and/or replaced, 358 (94%) involved an injector line #2 leak/repair.Almost three-quarters of the injector line #2 leak/repair incident vehicles were built in the 10 months identified by VW, which accounted for approximately one-quarter of the recalled vehicles.The failure rate for injector line #2 in vehicles built in the 10 months affected by the supplier line scratching issue is 6.0 incidents per thousand vehicles (IPTV).The failure rate for injector line #2 in other production months of recalled vehicles is 0.8 IPTV.The leak/repair rates for the other injector lines are all well under 1 IPTV.The action taken by Volkswagen is sufficient to resolve the issues raised by this investigation. The agency will continue to monitor this issue and reserves the right to take further action if warranted by the circumstances. Accordingly, this investigation is closed.
The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of steering wheel clock spring/steering column control module (SCCM) failures in model year (MY) 2012 Volkswagen Passat and CC models.The SCCM is a module within the steering column that incorporates a spiral conductor (a ribbon cable) to electrically connect the steering wheel to the vehicle's electrical system while allowing for the turning of the steering wheel.Complainants alleged that that the clock spring failed while driving and without warning.When the SCCM fails electrically, an air bag warning light is illuminated on the dash of the vehicle.If a vehicle with a failed SCCM were to be involved in a crash of sufficient severity to require deployment, the driver air bag may not deploy properly, or deploy at all.As the result of an Information Request response from Volkswagen, ODI determined that the same SCCM was used in several vehicle models and MYs including: 2010-2013 CC, 2010-2013 Eos, 2011-2013 Golf, 2012-2013 Jetta and Jetta SportWagen, 2010 and 2012-2014 Passat and 2011-2014 Tiguan.ODI identified a total of 29 NHTSA complaints across all affected vehicles potentially indicating a failed SCCM.Drivers often indicated that an audible noise was heard from the steering column when the unit failed. Some drivers also mentioned that there was a noticeable but minor resistance to turning of the steering wheel after the failure with noises coming from the steering column.The average failure mileage is approximately 30,500 miles and failures often occur outside of the factory warranty.There were no reported crashes or injuries identified in either the NHTSA or Volkswagen data as a result of SCCM failures.On July 30th, 2015 Volkswagen notified ODI that it would conduct a safety recall (15V-483) to remedy the SCCMs in 415,825 MY2010-2014 vehicles.According to Volkswagen, the SCCM can become contaminated with human hair or similar fibers entering the unit between the steering wheel and steering column.Over time this can cause the electrical cable to tear and lose connection between the steering wheel and vehicle.Volkswagen will install a cover that attaches over the SCCM to help prevent contaminants from entering the unit.A new SCCM designed to reduce outside contamination intrusion was previously introduced into new vehicle production during the 2014 model year; accordingly vehicles equipped with the new design SCCM are not included in the recall.The recall action initiated by the manufacturer addresses the safety risks identified by the investigation.Accordingly, the investigation is closed.The ODI reports cited above can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchSafetyIssues under the following identification (ODI) numbers: 10760644, 10758777, 10748922, 110734168, 10731545, 10721424, 10717651, 10715305, 10713742, 10713139, 10712295, 10711945, 10704830, 10704221, 10702926, 10702212, 10701406, 10691906, 10683944, 10682136, 10672715, 10670517, 10669312, 10628549, 10607240, 10575783, 10561143, 10552113, 10397670.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.