Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Electrical
Issue:
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.
On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temp…
Read the complete source summary
Issue:
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.
On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt.
Note: This recall only affects the following block heater/cord part numbers:
C014003034 PK5A408J09 PU14000904
C014003151 PK5A408J13 PU14000905
C014000885 PK5A489J11 PU14000907
C014000888 PK5A489J22 PU14000909
C014000907 PK5A410H00 PU14000911
C014100904 PU14000900 PU14000913
C014100907 PU14000901 PU14003571
C014100911 PU14000902 PK5A489J14
PK5A408J05 PU14000903
Safety Risk:
Engine block heater wiring that overheats or melts could create the risk of a fire.
Corrective Actions:
Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more fo…
Read the complete source summary
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
On certain vehicles equipped with power sliding doors, under certain conditions which impede the opening of the door (such as if the door becomes frozen with ice), the sliding door motor could stall when the door is operated. If the motor stalls, high current …
Read the complete source summary
On certain vehicles equipped with power sliding doors, under certain conditions which impede the opening of the door (such as if the door becomes frozen with ice), the sliding door motor could stall when the door is operated. If the motor stalls, high current in the door motor circuit could be generated, operating the circuit protection for the door motor. If this occurs with the sliding door latch mechanism in an unlatched position, the door could open while driving, increasing the risk of injury to a vehicle occupant. Correction: Dealers will replace the existing junction block and the rear sliding door wire harnesses with newly designed ones. The dealer will also install two sub wire harnesses to connect the junction block to the two rear door wire harnesses.
On certain vehicles operated where road salts are frequently used, corrosion of the spare tire carrier assembly cable may cause the separation of the spare tire stowed under the vehicle. The spare tire falling on the road surface creates a safety hazard that …
Read the complete source summary
On certain vehicles operated where road salts are frequently used, corrosion of the spare tire carrier assembly cable may cause the separation of the spare tire stowed under the vehicle. The spare tire falling on the road surface creates a safety hazard that may result in a crash causing injury and/or property damage. Correction: As an interim measure, dealers will remove the spare tire and store it in the cargo area of the vehicle. Dealers will replace the spare tire carrier assembly when parts become available. Note: This recall supersedes recall 2010-123. Vehicles that were inspected and/or repaired under the previous recall may still be at risk of spare tire separation and will require re-inspection and/or repair.
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 110 - Tire Selection and Rims. The combined weight of occupants and cargo, as displayed on the Tire and Loading Information label, does not meet the requirements of t…
Read the complete source summary
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 110 - Tire Selection and Rims. The combined weight of occupants and cargo, as displayed on the Tire and Loading Information label, does not meet the requirements of the Standard. As such, the vehicle could be unwittingly overloaded, which would result in poor vehicle handling characteristics, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will install an updated Tire and Loading Information label, as well as an owner's manual overlay label. Customers with certain vehicles equipped with a genuine Toyota trailer hitch and 18” run flat tires or 19” wheels will be presented with an option (1) to remove the trailer hitch or (2) replace the tires (and rims) with new Extra Load Tires.
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 210.2 - Lower Universal Anchorage Systems for Restraint Systems and Booster Cushions. The plastic buttons on the seatback of second row seats, which identify the loc…
Read the complete source summary
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 210.2 - Lower Universal Anchorage Systems for Restraint Systems and Booster Cushions. The plastic buttons on the seatback of second row seats, which identify the location of the UAS anchor bars, may have been installed slightly outside the limits prescribed by the Standard. Correction: A production change has been undertaken to remedy the technical non-compliance. No corrective recall action is required as the technical non-compliance is deemed to be non-safety related.
On certain vehicles, the brake stop lamp switch is mounted on a bracket welded on the service brake pedal support assembly. This bracket is relatively close to the parking brake pedal when the parking brake pedal is fully applied. Due to its proximity to the p…
Read the complete source summary
On certain vehicles, the brake stop lamp switch is mounted on a bracket welded on the service brake pedal support assembly. This bracket is relatively close to the parking brake pedal when the parking brake pedal is fully applied. Due to its proximity to the parking brake pedal, in some instances, the stop lamp switch bracket could be damaged by the operator's foot. Depending on the amount of bracket deformation, this could result in the brake stop lamps remaining "ON". If the deformation is significant, the service brakes could become partially engaged, resulting in brake drag with associated brake noise, vibration and/or illumination of the brake warning light. Should the vehicle continue to be operated in this condition, brake drag could cause excessive heat, which may result in reduced braking performance. This could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will replace the service brake pedal support assembly.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Sienna AS6
X 2.7 L engine
10.5 L/100 km
Data unavailable
Sienna AS6
X 3.5 L engine
11.5 L/100 km
Data unavailable
Sienna AWD AS6
X 3.5 L engine
12.7 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Sienna · AS6 — source specification details
Vehicle class
Minivan
Engine displacement
2.7 L
Cylinders
4
City fuel consumption
11.8 L/100 km
Highway fuel consumption
8.9 L/100 km
Tailpipe CO₂ emissions
242 g/km
Sienna · AS6 — source specification details
Vehicle class
Minivan
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
13.0 L/100 km
Highway fuel consumption
9.6 L/100 km
Tailpipe CO₂ emissions
265 g/km
Sienna AWD · AS6 — source specification details
Vehicle class
Minivan
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
14.4 L/100 km
Highway fuel consumption
10.6 L/100 km
Tailpipe CO₂ emissions
292 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2011 Toyota Sienna, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2021723 (Electrical). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2019008 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2016586 (Structure). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2011 Toyota Sienna.
AIR BAGS
211
STRUCTURE
154
ELECTRICAL SYSTEM
69
UNKNOWN OR OTHER
61
WHEELS
37
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
24-11
25-03
25-04
25-07
25-10
25-11
26-02
26-04
26-06
26-07
26-09
26-10
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2024-11
1
2025-03
1
2025-04
2
2025-07
1
2025-10
1
2025-11
1
2026-02
1
2026-04
2
2026-06
1
2026-07
2
2026-09
2
2026-10
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
111
25,000–49,999 mi
38
50,000–99,999 mi
93
100,000–149,999 mi
56
150,000+ mi
19
Missing or excluded mileage
298
317 of 615 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged34US complaint allegations
Fire flagged7US complaint allegations
Towed flagged13US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
69 matched manufacturer communications · 1 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA21002 · Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.