CANADA · VEHICLE RESEARCH

2010 Ram 1500

Canadian recalls & official vehicle records

0 source configurations

Evidence updated Nov 17, 2026 · Sources

Ram
Ram 1500Matching photograph not available
Model-family image · year, generation and trim may differ.
9Recall campaignsTransport Canada · exact matches
UnavailableCanadian complaintsNot available in our dataset
0Efficiency configurationsNRCan · Canadian test data
Source-ledResearch approachNo unsupported reliability grades
FROM RESEARCH TO YOUR NEXT CAR

2010 Ram 1500 for sale

Explore matching dealer listings in Canada. CAD prices · kilometres · Quebec excluded.

Search listings
Show matching dealer listings

Open this section to check available listings. No listing request is made until you open it.

Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.

Canadian owner complaints

Coverage, without substituted US totals.

Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.

Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.

Report a Canadian safety concern ↗

At a Glance

Source configurations, without assumed specifications.

Research marketCanada
Model year2010
Recall sourceTransport Canada
Efficiency configurationsNo exact match
VIN repair statusCheck with manufacturer
View source specifications

Safety Recalls (9)

Canadian archive snapshot, including historical or superseded records.

Other

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: …

Read the complete source summary

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

Transport Canada 2019420 · Aug 21, 2019Official notice ↗

Fuel System

On certain vehicles, the front fuel tank strap may become loose or detached due to corrosion of the frame bracket. This could result in the front of the fuel tank to lower, potentially allowing the front of the tank to make contact with the ground, which could…

Read the complete source summary

On certain vehicles, the front fuel tank strap may become loose or detached due to corrosion of the frame bracket. This could result in the front of the fuel tank to lower, potentially allowing the front of the tank to make contact with the ground, which could increase the risk of a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will install a reinforcement bracket onto the frame.

Transport Canada 2018122 · Mar 9, 2018Official notice ↗

Powertrain

On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the se…

Read the complete source summary

On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the service brake pedal or having the key in the ignition, which could result in unintended vehicle movement, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace the BTSI as necessary. The Body Control Module (BCM) will also be updated.

Transport Canada 2017659 · Dec 21, 2017Official notice ↗

Steering

On certain 2008-2012 Ram 2500 and 3500 4x4, Ram 3500 cab chassis, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Co…

Read the complete source summary

On certain 2008-2012 Ram 2500 and 3500 4x4, Ram 3500 cab chassis, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: Dealers will install a redesigned left outer tie rod assembly. Note: This recall supersedes recall 2011-253 (L16). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.

Transport Canada 2013397 · Nov 7, 2013Official notice ↗

Powertrain

On certain vehicles built between July 1, 2009 and November 30, 2009, the rear axle pinion nut may have been incorrectly manufactured and could loosen. If the pinion nut was to separate from the pinion, the rear driveshaft could become detached from the rear a…

Read the complete source summary

On certain vehicles built between July 1, 2009 and November 30, 2009, the rear axle pinion nut may have been incorrectly manufactured and could loosen. If the pinion nut was to separate from the pinion, the rear driveshaft could become detached from the rear axle, or fully detached from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: Dealers will install a pinion nut retainer.

Transport Canada 2012327 · Sep 27, 2012Official notice ↗

Steering

On certain 2008-2011 Ram 2500 and 3500 4x4, Ram 3500 cab chassis 4x2 and 4x4, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture. Additionally, other 2003-2008 Ram vehicles may have received the affected tie rod as a repl…

Read the complete source summary

On certain 2008-2011 Ram 2500 and 3500 4x4, Ram 3500 cab chassis 4x2 and 4x4, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture. Additionally, other 2003-2008 Ram vehicles may have received the affected tie rod as a replacement part during service, and are therefore also involved in this campaign. Although this condition tends to occur when making a tight turn during low speed parking lot type maneuvers, tie rod failure could result in a loss of directional stability. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the left outer tie rod end and tighten the track bar bolt. Note: The tie rod replacement portion of this recall was superseded by recall 2013-396.

Transport Canada 2011253 · Jul 14, 2011Official notice ↗

Brakes

Certain vehicles may have an improperly formed master cylinder to hydraulic control unit brake tube assembly end-flare that could lead to a loss of brake fluid and reduced braking performance. This could increase stopping distances, possibly resulting in a cr…

Read the complete source summary

Certain vehicles may have an improperly formed master cylinder to hydraulic control unit brake tube assembly end-flare that could lead to a loss of brake fluid and reduced braking performance. This could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will replace the suspect brake tubes.

Transport Canada 2010223 · Jul 7, 2010Official notice ↗

Other

Certain vehicles equipped with automatic transmission may have been built with a Wireless Ignition Node (WIN) module exhibiting a binding condition of the solenoid latch. This may result in a condition where the Ignition key can be removed from the WIN module…

Read the complete source summary

Certain vehicles equipped with automatic transmission may have been built with a Wireless Ignition Node (WIN) module exhibiting a binding condition of the solenoid latch. This may result in a condition where the Ignition key can be removed from the WIN module prior to placing the shifter in PARK. This could result in unintended vehicle movement, which may cause property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the WIN module.

Transport Canada 2010151 · May 10, 2010Official notice ↗

Brakes

On certain vehicles, the brake booster input rod may have been installed without the retaining clip, or in some cases, with an improperly formed retaining clip. Should the input rod separate from the assembly it could lead to a loss of brakes, which could res…

Read the complete source summary

On certain vehicles, the brake booster input rod may have been installed without the retaining clip, or in some cases, with an improperly formed retaining clip. Should the input rod separate from the assembly it could lead to a loss of brakes, which could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install or replace the retaining clips.

Transport Canada 2010009 · Jan 19, 2010Official notice ↗

Check your individual VIN

Model-year recalls do not establish repair completion.

Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.

Canadian recall and VIN lookup guidance ↗

Compare Model Years

Explore documented Ram 1500 records.

Totals reflect different time on the road and configurations. Fewer reports do not establish greater reliability.

Compare vehicles side by side →

RECHECK EVIDENCE LAB

Your vehicle’s evidence passport

What to investigate first for the 2010 Ram 1500.

1. Check recall repairs

9 matched Canadian recall campaigns. Start with the notices below and confirm applicability and repair completion for your VIN.

Review all 9 matched campaigns →

2. Know the reported themes

Canadian owner complaint totals are not available in our dataset. This is not a zero-complaint finding.

Research Canadian recalls below. Optional US complaint context is separate and does not establish Canadian experience.

Take a tailored checklist to your mechanic →
Coverage, sources and what remains unknown
Recall source
Transport Canada
Matched campaigns
9
Canadian complaint records
Unavailable
Efficiency configurations
0
Canadian investigations
Not imported
Repair completion
Not established

Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.

Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.

Specifications & Efficiency

Official source configurations. No trim is assumed.

No exact vehicle configuration match in the imported efficiency dataset. No estimate is substituted.

Canadian defect investigations

Check the current official Transport Canada register.

Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.

Look up Canadian investigations ↗

Before You Buy

Questions to take to a seller or qualified mechanic.

  • Verify the VIN and ask the manufacturer to confirm applicability and completion of recall repairs.
  • Ask for documentation related to the official Other campaign (2019420).
  • Ask for documentation related to the official Fuel System campaign (2018122).
  • Ask a mechanic to investigate any symptoms associated with reported categories; complaints alone are not a diagnosis.
  • Review service records and arrange an independent pre-purchase inspection.
Read the complete inspection checklist →
RECHECK EVIDENCE LAB

Take this to your mechanic

A research brief for the 2010 Ram 1500, built from this report.

  1. Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
  2. Ask for repair documentation for campaign 2019420 (Other). A model-year match does not establish that this VIN is affected.
  3. Ask for repair documentation for campaign 2018122 (Fuel System). A model-year match does not establish that this VIN is affected.
  4. Ask for repair documentation for campaign 2017659 (Powertrain). A model-year match does not establish that this VIN is affected.
  5. Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records

These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.

Reported Problem Categories

US NHTSA complaints for the 2010 Ram 1500.

No exact make/model/year complaint matches in this US dataset snapshot. This does not establish that no problems occurred.

Reports Over Time

US complaints by filing month, latest 12 observed months.

No supported complaint timeline available.

Bulletins & Investigations

US official records; applicability in Canada is not established.

0 matched manufacturer communications · 2 matched investigations. Communications are not necessarily recalls or technical service bulletins.

DP14004 · Totally Integrated Power Module Failure

In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher complaint rates related to fuel pump relay (FPR) failures than other subject vehicles. In a September 3, 2014 letter to NHTSA, Chrysler submitted a Defect Information Report (DIR) identifying a defect in the FPR within the TIPM-7 which can result in a no start or stall condition in approximately 188,723 model year (MY) 2011 Jeep Grand Cherokee (WK) and Dodge Durango (WD) vehicles manufactured from January 5, 2010 through July 20, 2011 (14V-530).In a February 24, 2015 letter, Chrysler submitted a second DIR expanding the scope of the FPR defect condition to include an additional 338,216 MY 2012 through 2013 Jeep Grand Cherokee vehicles manufactured from September 17, 2010 through August 19, 2013 and MY 2012 through 2013 Dodge Durango vehicles manufactured from January 18, 2011 through August 19, 2013 (15V-115).ODI analysis of the CAS allegations of TIPM defects resulting in stall while driving, airbag non-deployment, unintended acceleration, fire and other faults identified a single defect condition related to 1 of over 60 different circuits in the TIPM assembly. The most common effect of this defect condition, related to the fuel pump relay, was a no-start concern, but it could also result in stall while driving (76 complaints). No valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components.Except insofar as the petitioner's contentions relate to the defect condition addressed by the Chrysler recalls, the factual bases of the petitioner's contentions that any further investigation is necessary are unsupported. In our view, additional investigation is unlikely to result in a finding that a defect related to motor vehicle safety exists or a NHTSA order for the notification and remedy of a safety-related defect as alleged by the petitioner at the conclusion of the requested investigation. Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to best accomplish the agency's safety mission, the petition is den

Opened 20140925 · Closed 20150724

Official investigation archive ↗
PE12021 · Rear Differential Failure

In a letter dated October 2, 2012, Chrysler Group LLC (Chrysler) submitted a Defect Information Report (DIR) to NHTSA identifying a safety defect in approximately 48,058 vehicles built with an axle pinion nut that can loosen, which could result in lock-up of the rear axle and/or separation of the rear drive shaft from the rear axle (NHTSA Recall No. 12V-474).The vehicles involved in this recall are model year (MY) 2009 and MY 2010 Dodge Ram 1500 (46,677) and Dodge Dakota (1,381) vehicles manufactured between July 1, 2009 and November 30, 2009 built with 9.25? rear axles built at Chrysler?s Detroit Axle Assembly Plant.Chrysler stated it determined during this time frame there were instances of 9.25? axles built with rear axle pinion nuts that were missing the adhesive patch.The remedy for these vehicles is to install a pinion nut retainer.In a review of data in its complaint database and data submitted by Chrysler, the Office of Defects Investigation (ODI) identified 194 reports (including 3 crash reports) of rear axle lock up and/or drive shaft separation outside of the scope of recall 12V-474.In a letter dated February 5, 2013, Chrysler submitted a second DIR to NHTSA identifying another safety defect in approximately 278,150 vehicles built with 9.25? rear axles and outside of the scope of recall 12V-474 that could also result in lock-up of the rear axle and/or rear drive separation (NHTSARecall No. 13V-038).Chrysler stated that analysis of field return parts from this vehicle population, undersized pinion splines were found as the likely factor contributing to the loosening of the pinion nut.The vehicles involved in this recall are:266,091 MY 2009?2012 Dodge Ram 1500 vehicles manufactured from 2/28/09 through 6/30/09 and 12/1/09 through 10/20/11 (including 183,421 MY 2009-2010 subject vehicles); 8,475 MY 2009?2010 Dodge Dakota vehicles manufactured from 2/18/07 through 6/30/09 and 12/1/09 through 7/9/10; 2,346 MY 2009 Chrysler Aspen vehicles manufactured from 1/19/07 through 12/18/08; and 1,238 MY 2009 Dodge Durango vehicles manufactured from 1/17/07 through 12/18/08.The remedy for these vehicles is the same as for 12V-474.The failure counts in this resume are for the subject MY 2009-2010 Dodge Ram 1500 vehicles only.The recalled vehicle counts are based on current estimates from Chrysler and may differ from estimates in the original DIR's.This Preliminary Evaluation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10489593,10489091,10488952,10485174,10485096,10484596,10484490,10483394,10483370,10482853,10482816,10482438,10479806,10479352,10478724,10477460,10477354,10476923,10476691,10475939,10475241,10475158,10473147,10472488,10470655,10470516,10470231,10470152,10469969,10469548,10469435,10468759,10468024,10467819,10467805,10467683,10467196,10466630,10464240,10448778,10445208,10443542,10439902,10375394,10362531,10353440

Opened 20120719 · Closed 20130305

Official investigation archive ↗

Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.

Sources & Last Updated

Trace the evidence behind this report.

Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.
US communications & investigations · Official datasets · Communications received 2020–2026, exact matches; investigations full-history export.