Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Airbag
Issue:
On certain vehicles, the driver-front airbag inflator may not have been properly welded. As a result, the airbag module could separate from the steering wheel when it deploys in a crash.
Safety Risk:
An airbag that does not work properly could creat…
Read the complete source summary
Issue:
On certain vehicles, the driver-front airbag inflator may not have been properly welded. As a result, the airbag module could separate from the steering wheel when it deploys in a crash.
Safety Risk:
An airbag that does not work properly could create an increased risk of injury in a crash.
Corrective Action:
Nissan will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver-front airbag inflator.
Certain vehicles may not meet the requirements of the Canada Motor Vehicle Safety Standard (CMVSS) 301 - Fuel System Integrity. After a rear impact crash test during a compliance testing program, the post crash fuel spillage exceeded the limit specified by th…
Read the complete source summary
Certain vehicles may not meet the requirements of the Canada Motor Vehicle Safety Standard (CMVSS) 301 - Fuel System Integrity. After a rear impact crash test during a compliance testing program, the post crash fuel spillage exceeded the limit specified by the standard. Should fuel leakage occur and be in close proximity to an ignition source it could result in a fire. Correction: Dealers will install a protector to the gasoline recirculation tube at the filler neck connection.
On certain vehicles, the passenger-side curtain airbag may have been incorrectly positioned during vehicle assembly. As a result, in certain types of crashes where side curtain airbag deployment is expected, a portion of the bag may be restricted from fully d…
Read the complete source summary
On certain vehicles, the passenger-side curtain airbag may have been incorrectly positioned during vehicle assembly. As a result, in certain types of crashes where side curtain airbag deployment is expected, a portion of the bag may be restricted from fully deploying. The side curtain airbag will still deploy in a timely manner, meeting or exceeding applicable safety standards. Correction: Dealers will replace the side curtain airbag. This action is a Customer Satisfaction Campaign and is not being conducted as per the requirements of the Motor Vehicle Safety Act.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Cube AV
X 1.8 L engine
8.1 L/100 km
Data unavailable
Cube M6
X 1.8 L engine
8.7 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Cube · AV — source specification details
Vehicle class
Station wagon: Small
Engine displacement
1.8 L
Cylinders
4
City fuel consumption
8.5 L/100 km
Highway fuel consumption
7.5 L/100 km
Tailpipe CO₂ emissions
186 g/km
Cube · M6 — source specification details
Vehicle class
Station wagon: Small
Engine displacement
1.8 L
Cylinders
4
City fuel consumption
9.4 L/100 km
Highway fuel consumption
7.9 L/100 km
Tailpipe CO₂ emissions
200 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2010 Nissan Cube, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2026184 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2010247 (Fuel System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2010235 (Airbag). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2010 Nissan Cube.
ELECTRICAL SYSTEM
20
STEERING
17
AIR BAGS
8
POWER TRAIN
6
ENGINE
4
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
18-10
19-01
19-09
20-02
20-07
22-05
22-06
23-03
23-04
24-09
26-06
26-08
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2018-10
1
2019-01
1
2019-09
1
2020-02
1
2020-07
1
2022-05
1
2022-06
1
2023-03
1
2023-04
1
2024-09
1
2026-06
2
2026-08
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
10
25,000–49,999 mi
9
50,000–99,999 mi
14
100,000–149,999 mi
7
150,000+ mi
2
Missing or excluded mileage
14
42 of 56 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged4US complaint allegations
Fire flagged1US complaint allegations
Towed flagged4US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
28 matched manufacturer communications · 2 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA21002 · Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
The Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25005 on June 13, 2025, to assess the scope, root cause, and potential defect in 2009 Model Year (MY) Nissan Cube vehicles equipped with Takata PSDI-X air bag inflators.At the time the investigation was opened, analysis by Nissan and Takata (now New Leaf LLC) indicated that a rupture occurred at a weld point between the inflator cap and housing in a 2009 MY Nissan Cube.Nissan ruled out the propellant degradation root cause characteristic of the larger, well known, Takata recall, and instead identified a welding root cause. On April 9, 2026, Nissan North America, Inc. submitted a Part 573 Safety Recall Report to address the weld defect.Recall 26V230 includes the 28,388 2009 MY vehicles identified in the opening resume for this investigation and expands the population to include 2010 MY Nissan Cube vehicles for a total population of 47,928 vehicles produced between October 10, 2008, and September 25, 2010.Nissan identified the driver’s front air bag inflator (Takata PSDI-X, Part Number 98560-7991C) produced by TK Services Inc. within a specific lot may contain an improper body weld seal to the inflator base. This improper weld can cause the air bag module to detach from the steering wheel during deployment, increasing the risk of injury to the occupant in the event of a crash. Dealers will inspect the serial number on the driver’s air bag inflator in recalled vehicles to identify the air bag inflator lot. If the inflator is part of the affected lot, the dealer will remove and replace it with a new inflator manufactured by a different supplier. This repair will be performed free of charge. See NHTSA Recall No. 26V230 for further details. Based on Nissan's recall action, this Preliminary Evaluation is closed.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.