CANADA · VEHICLE RESEARCH

2006 Lexus IS 250

Canadian recalls & official vehicle records

Subcompact2.5 L3 source configurations

Evidence updated Nov 17, 2026 · Sources

LexusLexus IS 250 model-family photograph; generation, year and trim may differ
Model-family image · year, generation and trim may differ.Photo: TTTNIS · CC0
11Recall campaignsTransport Canada · exact matches
UnavailableCanadian complaintsNot available in our dataset
3Efficiency configurationsNRCan · Canadian test data
Source-ledResearch approachNo unsupported reliability grades
FROM RESEARCH TO YOUR NEXT CAR

2006 Lexus IS 250 for sale

Explore matching dealer listings in Canada. CAD prices · kilometres · Quebec excluded.

Search listings
Show matching dealer listings

Open this section to check available listings. No listing request is made until you open it.

Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.

Canadian owner complaints

Coverage, without substituted US totals.

Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.

Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.

Report a Canadian safety concern ↗

At a Glance

Source configurations, without assumed specifications.

Research marketCanada
Model year2006
Vehicle classSubcompact
TransmissionVaries by configuration
Engine2.5 L
Recall sourceTransport Canada
Efficiency configurations3
VIN repair statusCheck with manufacturer
View source specifications

Safety Recalls (11)

Canadian archive snapshot, including historical or superseded records.

Electrical

Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temp…

Read the complete source summary

Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

Transport Canada 2021723 · Nov 24, 2021Official notice ↗

Airbag

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force …

Read the complete source summary

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Depending on the model, dealers will either replace the passenger frontal airbag inflator or airbag assembly. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Transport Canada 2017007 · Jan 9, 2017Official notice ↗

Fuel System

On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of…

Read the complete source summary

On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.

Transport Canada 2014458 · Oct 16, 2014Official notice ↗

Visual System

On certain vehicles, the wiper arm securing nuts could have been insufficiently tightened during assembly. If the movement of the wipers is restricted by an external load, such as heavy snow on the windshield, the wiper arms could slip and one or both wipers c…

Read the complete source summary

On certain vehicles, the wiper arm securing nuts could have been insufficiently tightened during assembly. If the movement of the wipers is restricted by an external load, such as heavy snow on the windshield, the wiper arms could slip and one or both wipers could become inoperative. If this occurs, driver visibility could be reduced, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will clean the mating surface of the wiper arm and motor shaft and install improved wiper arm nuts.

Transport Canada 2013031 · Jan 30, 2013Official notice ↗

Fuel System

On certain GS 300, GS 300 AWD, GS 350, IS 250, IS 250 AWD and IS 350 vehicles, the fuel pressure sensor connected to the engine fuel delivery pipe may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could …

Read the complete source summary

On certain GS 300, GS 300 AWD, GS 350, IS 250, IS 250 AWD and IS 350 vehicles, the fuel pressure sensor connected to the engine fuel delivery pipe may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and pipe, and through the threaded portion of the sensor. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor. If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications. If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery pipe will be replaced, and the sensor will be tightened.

Transport Canada 2011037 · Jan 26, 2011Official notice ↗

Brakes

Certain vehicles use brake fluids containing polymers that act as lubricants for certain brake system components. If during vehicle maintenance, brake fluid is used that does not contain such polymers or only small amounts, part of the internal rubber seal lo…

Read the complete source summary

Certain vehicles use brake fluids containing polymers that act as lubricants for certain brake system components. If during vehicle maintenance, brake fluid is used that does not contain such polymers or only small amounts, part of the internal rubber seal located at the end of the brake master cylinder piston may become dry and may curl during movement of the piston. If this occurs, a small amount of the brake fluid could slowly leak from the brake master cylinder into the brake booster, resulting in illumination of the brake warning lamp. If the brake warning light has illuminated and the vehicle continues to be operated without refilling the master cylinder brake fluid reservoir, the driver will begin to notice a spongy or soft brake pedal feel and braking performance may gradually decline. This will increase the stopping distance, increasing the likelihood of a crash. Correction: Dealers will replace the brake master cylinder seal with a newly designed one.

Transport Canada 2010361 · Oct 21, 2010Official notice ↗

Other

On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, whic…

Read the complete source summary

On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.

Transport Canada 2009290 · Oct 7, 2009Official notice ↗

Fuel System

On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pi…

Read the complete source summary

On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.

Transport Canada 2009015 · Jan 19, 2009Official notice ↗

Fuel System

On certain GS 300, GS 300 AWD, IS 250, IS 250 AWD and IS 350 vehicles, incorrect fabrication process may cause the fuel lines to crack, possibly resulting in a leak. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire causing i…

Read the complete source summary

On certain GS 300, GS 300 AWD, IS 250, IS 250 AWD and IS 350 vehicles, incorrect fabrication process may cause the fuel lines to crack, possibly resulting in a leak. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire causing injury or death. Correction: Dealers will replace the fuel lines.

Transport Canada 2007377 · Nov 28, 2007Official notice ↗

Seats And Restraints

On certain GS 300, GS 300 AWD, GS 430, IS 250, IS 250 AWD and IS 350 vehicles, the front seat belt retractors may contain an inappropriately sized part for the emergency locking system. This can prevent the locking system from releasing when it is activated. …

Read the complete source summary

On certain GS 300, GS 300 AWD, GS 430, IS 250, IS 250 AWD and IS 350 vehicles, the front seat belt retractors may contain an inappropriately sized part for the emergency locking system. This can prevent the locking system from releasing when it is activated. If the seat belt is locked in this condition, the occupant may either not fasten the seat belt, or be inadequately restrained due to improper belt-fit thereby increasing the risk of injury. Correction: Dealers will replace the front seat belt assemblies.

Transport Canada 2006078 · Apr 13, 2006Official notice ↗

Other

On certain AWD vehicles, the accelerator pedal may temporarily become stuck in the partially depressed position due to inadequate clearance between the pedal linkage and a plastic pad embedded into the vehicle's carpet. This condition may interfere with the a…

Read the complete source summary

On certain AWD vehicles, the accelerator pedal may temporarily become stuck in the partially depressed position due to inadequate clearance between the pedal linkage and a plastic pad embedded into the vehicle's carpet. This condition may interfere with the accelerator pedal returning to the idle position. Unwanted acceleration could result in a vehicle crash without prior warning. Correction: Dealers will replace the acceleration pedal assembly and modify the carpet.

Transport Canada 2005395 · Dec 19, 2005Official notice ↗

Check your individual VIN

Model-year recalls do not establish repair completion.

Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.

Canadian recall and VIN lookup guidance ↗
RECHECK EVIDENCE LAB

Your annual energy budget

Use official test estimates with your own distance and prices.

Enter a price to estimate your annual energy budget.

Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.

Compare Model Years

Explore documented Lexus IS 250 records.

Totals reflect different time on the road and configurations. Fewer reports do not establish greater reliability.

Compare vehicles side by side →

RECHECK EVIDENCE LAB

Your vehicle’s evidence passport

What to investigate first for the 2006 Lexus IS 250.

1. Check recall repairs

11 matched Canadian recall campaigns. Start with the notices below and confirm applicability and repair completion for your VIN.

Review all 11 matched campaigns →

2. Know the reported themes

Canadian owner complaint totals are not available in our dataset. This is not a zero-complaint finding.

Research Canadian recalls below. Optional US complaint context is separate and does not establish Canadian experience.

Take a tailored checklist to your mechanic →
Coverage, sources and what remains unknown
Recall source
Transport Canada
Matched campaigns
11
Canadian complaint records
Unavailable
Efficiency configurations
3
Canadian investigations
Not imported
Repair completion
Not established

Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.

Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.

Specifications & Efficiency

Official source configurations. No trim is assumed.

Source configurationFuel / powertrainCombined efficiencyRange
IS 250
AS6
Z 2.5 L engine9.7 L/100 kmData unavailable
IS 250
M6
Z 2.5 L engine11.3 L/100 kmData unavailable
IS 250 AWD
AS6
Z 2.5 L engine10.6 L/100 kmData unavailable

Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.

More from the official configuration records

Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.

IS 250 · AS6 — source specification details
Vehicle classSubcompact
Engine displacement2.5 L
Cylinders6
City fuel consumption11.2 L/100 km
Highway fuel consumption8.0 L/100 km
Tailpipe CO₂ emissions223 g/km
IS 250 · M6 — source specification details
Vehicle classSubcompact
Engine displacement2.5 L
Cylinders6
City fuel consumption13.1 L/100 km
Highway fuel consumption9.0 L/100 km
Tailpipe CO₂ emissions260 g/km
IS 250 AWD · AS6 — source specification details
Vehicle classSubcompact
Engine displacement2.5 L
Cylinders6
City fuel consumption11.9 L/100 km
Highway fuel consumption9.0 L/100 km
Tailpipe CO₂ emissions244 g/km

Canadian defect investigations

Check the current official Transport Canada register.

Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.

Look up Canadian investigations ↗

Before You Buy

Questions to take to a seller or qualified mechanic.

  • Verify the VIN and ask the manufacturer to confirm applicability and completion of recall repairs.
  • Ask for documentation related to the official Electrical campaign (2021723).
  • Ask for documentation related to the official Airbag campaign (2017007).
  • Ask a mechanic to investigate any symptoms associated with reported categories; complaints alone are not a diagnosis.
  • Review service records and arrange an independent pre-purchase inspection.
Read the complete inspection checklist →
RECHECK EVIDENCE LAB

Take this to your mechanic

A research brief for the 2006 Lexus IS 250, built from this report.

  1. Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
  2. Ask for repair documentation for campaign 2021723 (Electrical). A model-year match does not establish that this VIN is affected.
  3. Ask for repair documentation for campaign 2017007 (Airbag). A model-year match does not establish that this VIN is affected.
  4. Ask for repair documentation for campaign 2014458 (Fuel System). A model-year match does not establish that this VIN is affected.
  5. Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records

These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.

Reported Problem Categories

US NHTSA complaints for the 2006 Lexus IS 250.

STRUCTURE
53
AIR BAGS
46
ENGINE
19
VEHICLE SPEED CONTROL
18
UNKNOWN OR OTHER
17

US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.

Reports Over Time

US complaints by filing month, latest 12 observed months.

A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.

Read chart data
2018-083
2018-101
2018-121
2019-011
2019-021
2019-031
2019-042
2019-062
2019-072
2021-041
2022-091
2023-021
RECHECK EVIDENCE LAB

The mileage lens

Where the available US complaint records fall by reported mileage.

Reported mileage at incidentMatched complaint records
Below 25,000 mi19
25,000–49,999 mi21
50,000–99,999 mi46
100,000–149,999 mi41
150,000+ mi12
Missing or excluded mileage50

139 of 189 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.

Crash flagged10US complaint allegations
Fire flagged3US complaint allegations
Towed flagged2US complaint allegations

Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.

Bulletins & Investigations

US official records; applicability in Canada is not established.

40 matched manufacturer communications · 1 matched investigations. Communications are not necessarily recalls or technical service bulletins.

EA21002 · Desiccated Air Bag Inflator Rupture

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Opened 20210917 · No closure date in source

Official investigation archive ↗
Communication 10217806

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10217805

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10214355

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10210374

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10209023

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10207945

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10205392

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10205391

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗

Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.

Sources & Last Updated

Trace the evidence behind this report.

Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.
US communications & investigations · Official datasets · Communications received 2020–2026, exact matches; investigations full-history export.