Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Electrical
Issue:
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.
On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temp…
Read the complete source summary
Issue:
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.
On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt.
Note: This recall only affects the following block heater/cord part numbers:
C014003034 PK5A408J09 PU14000904
C014003151 PK5A408J13 PU14000905
C014000885 PK5A489J11 PU14000907
C014000888 PK5A489J22 PU14000909
C014000907 PK5A410H00 PU14000911
C014100904 PU14000900 PU14000913
C014100907 PU14000901 PU14003571
C014100911 PU14000902 PK5A489J14
PK5A408J05 PU14000903
Safety Risk:
Engine block heater wiring that overheats or melts could create the risk of a fire.
Corrective Actions:
Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force …
Read the complete source summary
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Depending on the model, dealers will either replace the passenger frontal airbag inflator or airbag assembly. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, whic…
Read the complete source summary
On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
ES 350 AS6
Z 3.5 L engine
10.6 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
ES 350 · AS6 — source specification details
Vehicle class
Mid-size
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
12.3 L/100 km
Highway fuel consumption
8.6 L/100 km
Tailpipe CO₂ emissions
244 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2008 Lexus ES350, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2021723 (Electrical). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2017007 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2009290 (Other). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2008 Lexus ES350.
AIR BAGS
170
VEHICLE SPEED CONTROL
39
STRUCTURE
12
UNKNOWN OR OTHER
11
ELECTRICAL SYSTEM
9
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
18-03
18-04
18-06
18-08
18-11
18-12
19-02
19-03
19-04
19-05
20-04
22-12
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2018-03
2
2018-04
1
2018-06
1
2018-08
1
2018-11
1
2018-12
1
2019-02
1
2019-03
1
2019-04
1
2019-05
2
2020-04
1
2022-12
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
36
25,000–49,999 mi
12
50,000–99,999 mi
18
100,000–149,999 mi
9
150,000+ mi
2
Missing or excluded mileage
178
77 of 255 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged27US complaint allegations
Fire flagged1US complaint allegations
Towed flagged2US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
39 matched manufacturer communications · 2 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA07010 · UNWANTED ACCELERATION, FLOOR MAT
THE DRIVER SIDE FLOOR MAT WILL NOT INTERFERE WITH THE THROTTLE PEDAL IF PROPERLY SECURED USING THE RETAINING HOOKS PROVIDED BY TOYOTA.HOWEVER, IF THE ALL WEATHER MAT IS UNSECURED AND MOVES FORWARD FROM ITS INTENDED POSITION IT CAN ENTRAP THE THROTTLE PEDAL AT THE FULLY OPEN POSITION AFTER IT HAS BEEN DEPRESSED.THIS CAN HAPPEN REGARDLESS OF WHETHER OR NOT ANOTHER MAT (CARPET) IS UNDERNEATH.WHEN THIS OCCURS, SOME OPERATORS REACT BY APPLYING THE BRAKE PEDAL MULTIPLE TIMES, DEPLETING THE BRAKING SYSTEM'S (VACUUM BASED) POWER ASSIST.STOPPING THE VEHICLE WITH UNASSISTED BRAKING WHILE THE THROTTLE IS FULLY OPEN REQUIRES SIGNIFICANT PEDAL FORCE, WHICH SOME OPERATORS DID NOT, OR WERE UNABLE TO, APPLY FOR THE REQUIRED DURATION.CONTINUED DRIVING IN THIS CONDITION RESULTS IN OVERHEATED BRAKES, WHICH FURTHER DIMINISHES THE BRAKING EFFECTIVENESS.SOME OPERATORS ATTEMPTED TO TURN THE VEHICLE OFF BY DEPRESSING THE ENGINE CONTROL BUTTON, HOWEVER THEY WERE UNAWARE THE BUTTON HAD TO BE DEPRESSED FOR THREE SECONDS TO STOP THE ENGINE WHEN THE VEHICLE IS IN MOTION; THIS FUNCTIONALITY WAS NOT EXPLAINED ADEQUATELY IN THE OWNER'S MANUAL.IN ODI INTERVIEWS, OWNER'S REPORTED THEY WERE UNAWARE THE ALL WEATHER MAT HAD THE POTENTIAL TO INTERFERE WITH THE THROTTLE PEDAL, ADVISING THAT THIS WAS NEVER PROPERLY EXPLAINED GIVEN THE SIGNIFICANT HAZARD IT REPRESENTED.OWNERS REPORTED SEVERAL EXPLANATIONS FOR WHY THE MAT WAS UNSECURED, INCLUDING THAT THE VEHICLE WAS DELIVERED IN THIS CONDITION (MOST COMMON REASON), OR THAT THEY HAD (UNWITTINGLY) INSTALLED THE MAT THEMSELVES, OR THAT ANOTHER PARTY, SUCH AS A CAR WASH ATTENDANT, HAD DISTURBED THE MAT WITHOUT THE OWNER'S KNOWLEDGE.ONE CONSUMER REPORTED THAT THEIR VEHICLE WAS DELIVERED WITHOUT THE RETAINING DEVICES INSTALLED.IN A SEPTEMBER 26, 2007 LETTER TO NHTSA, TOYOTA INDICATED THAT THEY WOULD CONDUCT A SAFETY RECALL TO REPLACE THE ALL WEATHER MAT WITH A REDESIGNED MAT.ACCORDING TO TOYOTA, THE NEW MAT DESIGN WILL REDUCE THE POTENTIAL FOR MAT INTERFERENCE WITH THE THROTTLE PEDAL.THE POPULATION NOTED ABOVE REPRESENTS THE NUMBER OF SUBJECT MATSTHAT HAVE BEEN SOLD IN THE UNITED STATES.SINCE TOYOTA CANNOT IDENTIFY WHICH VEHICLES MAY HAVE THE SUBJECT MATS, THEY WILL SEND A LETTER TO ALL REGISTERED OWNERS OF THE SUBJECT VEHICLES (ESTIMATED 750K) ADVISING THEM OF THE CONCERN AND REMEDY.A COPY OF THAT LETTER WILL BE POSTED TO NHTSA'S WEB SITE UNDER RECALL 07E-082; IT CONTAINS A DESCRIPTION OF THE CONDITION AND THE ACTIONS AN OPERATOR SHOULD TAKE IN THE EVENT THROTTLE ENTRAPMENT OCCURS WHILE DRIVING.THE FATALITY INCIDENT NOTED ABOVE OCCURRED IN JULY 2007 AND WAS INVESTIGATED BY NHTSA'S SPECIAL CRASH INVESTIGATIONS OFFICE.IT HAS NOT BEEN REPORTED ON A VEHICLE OWNER QUESTIONNAIRE.THE OPERATOR REPORTEDLY TRAVELLED AT SPEEDS IN EXCESS OF 100 MPH FOR AN ESTIMATED EIGHT MILES ON AN INTERSTATE IN CALIFORNIA BEFORE IT STRUCK TWO OTHER VEHICLES.ONE OF THE STRUCK VEHICLES AND THE SUBJECT VEHICLE CAUGHT FIRE.THE OCCUPANT OF THE STRUCK VEHICLE DID NOT EVACULATE AND DIED AT THE SCENE.THE SUBJECT VEHICLE DRIVER SUFFERED A BROKEN BONE.THE CALIFORNIA HIGHWAY PATROL IS INVESTIGATING THE INCIDENT ALSO.ODI DID NOT ISSUE AN INFORMATION REQUEST LETTER DURING THIS INVESTIGATION.THE TOYOTA REPORTS NOTED ABOVE WERE REPORTED DURING PRELIMINARY EVALUATION PE07-016 AND ARE CURRENT THROUGH APRIL 2007 FOR MY 2007 LEXUS ES350 ONLY.ODI DOES NOT HAVE FIELD EXPERIENCE DATA FROM TOYOTA FOR CAMRY VEHICLES.THROTTLE ENTRAPMENT DUE TO IMPROPERLY INSTALLED FLOOR MATS COULD BE A CONCERN IN ALL VEHICLES.THEREFORE, DRIVERS SHOULD ALWAYS ENSURE THEIR FLOOR MATS ARE PROPERLY AND SAFELY INSTALLED.THIS INCL
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.