Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Fuel System
Issue:
On certain vehicles, the fuel pump relay could fail. A fuel pump relay failure can result in a no-start condition or cause a sudden loss of engine power while driving.
Note: Vehicles that had a fuel pump relay replaced as part of a Transport Canada Re…
Read the complete source summary
Issue:
On certain vehicles, the fuel pump relay could fail. A fuel pump relay failure can result in a no-start condition or cause a sudden loss of engine power while driving.
Note: Vehicles that had a fuel pump relay replaced as part of a Transport Canada Recall No. 2014-386 (FCA Recall No. P54) or 2015-085 (R09) require a second repair under this recall.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
FCA will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump relay, mounting bracket and related wiring.
On certain vehicles, a brake booster shield may have been incorrectly installed as part of recall P14/2014-112. An incorrectly installed shield could be less effective in diverting water away from the brake booster, creating the possibility of corrosion allowi…
Read the complete source summary
On certain vehicles, a brake booster shield may have been incorrectly installed as part of recall P14/2014-112. An incorrectly installed shield could be less effective in diverting water away from the brake booster, creating the possibility of corrosion allowing water to get inside. In a cold climate, water inside the brake booster could freeze limiting the braking ability of the vehicle, resulting in longer braking distances, increasing the risk of crash causing injury and/or damage to property. Correction: Dealers will inspect the installation of the brake booster shield and perform repairs as necessary.
On certain vehicles equipped with electro-hydraulic power steering (“EHPS”), the alternator may fail suddenly. This could result in the engine stalling, causing a loss of motive power which could increase the risk of a crash as well as disable various vehicle …
Read the complete source summary
On certain vehicles equipped with electro-hydraulic power steering (“EHPS”), the alternator may fail suddenly. This could result in the engine stalling, causing a loss of motive power which could increase the risk of a crash as well as disable various vehicle safety systems, and could also cause a fire. Both issues could increase the risk of injury and/or damage to property. Correction: Dealers will inspect the part number on the alternator, and will replace the alternator as necessary. Note: Only specific engine and alternator combinations are affected by this campaign.
On certain vehicles equipped with illuminated sun visor vanity mirrors with 120mm wiring, service repairs requiring removal of the sun visors and/or headliner may cause an electrical short circuit which could increase the risk of a fire causing injury and/or d…
Read the complete source summary
On certain vehicles equipped with illuminated sun visor vanity mirrors with 120mm wiring, service repairs requiring removal of the sun visors and/or headliner may cause an electrical short circuit which could increase the risk of a fire causing injury and/or damage to property. Vehicles equipped with 120mm wiring that were previously repaired under recall 2014-275 will require repair under this recall. Correction: Dealers will replace the sun visors and modify the surrounding sheet metal and install vanity lamp wiring guides.
This recall was replaced by Transport Canada Recall No. 2019-573 (FCA Recall No. V62).
On certain vehicles, a fuel pump relay within the Totally Integrated Power Module (TIPM-7) could fail, causing the engine to stall or to fail to start. Engine stalling wou…
Read the complete source summary
This recall was replaced by Transport Canada Recall No. 2019-573 (FCA Recall No. V62).
On certain vehicles, a fuel pump relay within the Totally Integrated Power Module (TIPM-7) could fail, causing the engine to stall or to fail to start. Engine stalling would result in a loss of motive power, which, in conjunction with driver reactions and traffic conditions, could increase the risk of a crash resulting in injury and/or damage to property. Correction: Dealers will install a revised fuel pump relay external to the TIPM-7.
On certain vehicles equipped with 3.6L engines and 160 amp output alternators, the alternator may fail suddenly. This could result in the engine stalling, causing a loss of motive power which could increase the risk of a crash as well as disable various vehicl…
Read the complete source summary
On certain vehicles equipped with 3.6L engines and 160 amp output alternators, the alternator may fail suddenly. This could result in the engine stalling, causing a loss of motive power which could increase the risk of a crash as well as disable various vehicle safety systems, and could also cause a fire. Both issues could increase the risk of injury and/or damage to property. Correction: Dealers will replace the alternator.
On certain vehicles equipped with illuminated sun visor vanity mirrors, service repairs requiring removal of the sun visors and/or headliner may cause an electrical short circuit, which could increase the risk of a fire causing injury and/or damage to property…
Read the complete source summary
On certain vehicles equipped with illuminated sun visor vanity mirrors, service repairs requiring removal of the sun visors and/or headliner may cause an electrical short circuit, which could increase the risk of a fire causing injury and/or damage to property. Correction: Dealers will inspect wiring for damage and repair as necessary, re-route wiring and install a sun visor spacer.
On certain vehicles, the centre shell of the brake booster may corrode. A corroded centre shell could allow water to get inside the brake booster, which in a cold climate may freeze. This could result in inadequate braking, increasing stopping distances and in…
Read the complete source summary
On certain vehicles, the centre shell of the brake booster may corrode. A corroded centre shell could allow water to get inside the brake booster, which in a cold climate may freeze. This could result in inadequate braking, increasing stopping distances and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace any brake booster that has an unacceptable loss of vacuum pressure, all affected vehicles will have a water diverter shield added to the brake booster.
On certain vehicles, the anti-lock braking system (ABS) may have an out of specification traction isolation valve. This would cause the driver to experience a momentary hard brake pedal feel during certain braking events, which in conjunction with driver react…
Read the complete source summary
On certain vehicles, the anti-lock braking system (ABS) may have an out of specification traction isolation valve. This would cause the driver to experience a momentary hard brake pedal feel during certain braking events, which in conjunction with driver reactions, may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the ABS module.
On certain vehicles equipped with a 3.6L engine, debris in the cylinder block (from the manufacturing process) could cause connecting rod bearing and crankshaft bearing damage. As a result, abnormal engine performance may be noticed, and in some cases the eng…
Read the complete source summary
On certain vehicles equipped with a 3.6L engine, debris in the cylinder block (from the manufacturing process) could cause connecting rod bearing and crankshaft bearing damage. As a result, abnormal engine performance may be noticed, and in some cases the engine could fail. Engine failure would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and driver reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the engine assembly.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Grand Cherokee 4X4 FFV A5
X 3.6 L engine
12.7 L/100 km
Data unavailable
Grand Cherokee 4X4 FFV A5
E 3.6 L engine
16.9 L/100 km
Data unavailable
Grand Cherokee 4X4 (FuelSaver MDS) A6
X 5.7 L engine
15.7 L/100 km
Data unavailable
Grand Cherokee 4X4 SRT8 (FuelSaver MDS) A5
Z 6.4 L engine
16.4 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Grand Cherokee 4X4 FFV · A5 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
3.6 L
Cylinders
6
City fuel consumption
14.6 L/100 km
Highway fuel consumption
10.4 L/100 km
Tailpipe CO₂ emissions
292 g/km
Grand Cherokee 4X4 FFV · A5 — source specification details
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2012 Jeep Grand Cherokee, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2019573 (Fuel System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2017450 (Brakes). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2017341 (Electrical). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2012 Jeep Grand Cherokee.
ELECTRICAL SYSTEM
837
ENGINE
285
SERVICE BRAKES
278
FUEL/PROPULSION SYSTEM
216
UNKNOWN OR OTHER
121
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-10
25-11
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-09
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-10
4
2025-11
2
2025-12
2
2026-01
4
2026-02
2
2026-03
1
2026-04
2
2026-05
2
2026-06
3
2026-07
1
2026-09
6
2026-11
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
126
25,000–49,999 mi
219
50,000–99,999 mi
452
100,000–149,999 mi
179
150,000+ mi
42
Missing or excluded mileage
627
1,018 of 1,645 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged46US complaint allegations
Fire flagged105US complaint allegations
Towed flagged97US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
74 matched manufacturer communications · 7 matched investigations. Communications are not necessarily recalls or technical service bulletins.
DP14004 · Totally Integrated Power Module Failure
In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher complaint rates related to fuel pump relay (FPR) failures than other subject vehicles. In a September 3, 2014 letter to NHTSA, Chrysler submitted a Defect Information Report (DIR) identifying a defect in the FPR within the TIPM-7 which can result in a no start or stall condition in approximately 188,723 model year (MY) 2011 Jeep Grand Cherokee (WK) and Dodge Durango (WD) vehicles manufactured from January 5, 2010 through July 20, 2011 (14V-530).In a February 24, 2015 letter, Chrysler submitted a second DIR expanding the scope of the FPR defect condition to include an additional 338,216 MY 2012 through 2013 Jeep Grand Cherokee vehicles manufactured from September 17, 2010 through August 19, 2013 and MY 2012 through 2013 Dodge Durango vehicles manufactured from January 18, 2011 through August 19, 2013 (15V-115).ODI analysis of the CAS allegations of TIPM defects resulting in stall while driving, airbag non-deployment, unintended acceleration, fire and other faults identified a single defect condition related to 1 of over 60 different circuits in the TIPM assembly. The most common effect of this defect condition, related to the fuel pump relay, was a no-start concern, but it could also result in stall while driving (76 complaints). No valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components.Except insofar as the petitioner's contentions relate to the defect condition addressed by the Chrysler recalls, the factual bases of the petitioner's contentions that any further investigation is necessary are unsupported. In our view, additional investigation is unlikely to result in a finding that a defect related to motor vehicle safety exists or a NHTSA order for the notification and remedy of a safety-related defect as alleged by the petitioner at the conclusion of the requested investigation. Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to best accomplish the agency's safety mission, the petition is den
On July 1st, 2014 Chrysler Group LLC (Chrysler) notified the Office of Defects Investigation (ODI) that it would conduct a safety recall to remedy a wiring-related fire hazard on the headliner of approximately 661,888 model year (MY) 2011-2014 Jeep Grand Cherokee and Dodge Durango vehicles manufactured between January 5, 2010 and December 11, 2013 (see NHTSA Safety Recall 14V-391), with notifications to begin in August 2014. According to Chrysler, the fire is caused by an electrical short in the vanity lamp wiring for either one of the sun visors mounted on the vehicle. The sun visors are mounted to the roof of the vehicle through the headliner with three metal screws. It is possible for the sun visor wiring to be pierced by one of these screws either during initial vehicle assembly or later headliner area repairs which may cause an electrical short potentially resulting in fire.ODI opened an investigation involving MY 2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles based on consumer reports of headliners catching fire at the front of the passenger's compartment near the sun visors. Complainants reported failure symptoms that ranged from discoloration to open flame burning of the headliner and/or sun visor material. Complainants reported a burning plastic smell and smoke from the headliner, often occurring while the vehicle was in motion. Damage ranged from a small burn spot on the headliner to a near complete burn of the vehicle resulting in a total loss; sunroof damage/glass shattering occurred in some cases. Incidents are more likely to occur when the ignition key is in the on position.However, several vehicles continued to burn after the key was turned off, and key-off fires, while highly unlikely, cannot be fully eliminated as a potential problem. The earliest incidents chronologically were often associated with vehicle assembly or in-plant repair procedures. Chrysler revised assembly and in-plant repair procedures for the headliner which reduced the number of fields incidents.However, anytime a repair is made to the headliner of the vehicle there could still be a risk of shorting the wiring and creating a hazard.Dealership technicians will inspect the vehicles for damaged wiring caused by an improper service procedure and repair any damage. Also, all vehicles will have a plastic guideway installed on each sun visor that routes the wiring away from the attachment screws preventing the wiring from being shorted. All MY 2011-2014 Grand Cherokee and Dodge Durango built before December 11, 2013 are affected by the recall; vehicles manufactured after this date had the guideway installed during vehicle production.ODI received a total of 6 complaints as of June 2014, all of which reported a fire and two of which alleged related injuries. All 6 incidents occurred while the vehicle was being driven. In each case the driver smelled smoke and witnessed the headliner burning on either the driver or passenger side. Two complaints indicate smoke inhalation injuries to the driver. In response to ODI's information request letters of 8/28/2013 and 2/26/2014, Chrysler provided consumer and warranty data which was received by ODI on 10/7/2013 and 3/19/2014. Analysis of the Chrysler data indicated a total of 91 unique incidents related to the investigation of which about two thirds reported an open flame and smoke, the remaining showed only small burn marks with no visible flame. Three Chrysler reports indicated injuries consisting of minor burns on the customer?s hands and smoke inhalation.The investigation is closed on the basis of the recall action the manufacturer has undertaken which is sufficient to address NHTSA?s con
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
The Office of Defects Investigation (ODI) analyzed complaint data provided by Chrysler as well as complaints submitted to ODI from consumers. ODI's analysis identified a total of 24 unique reports indicating power steering hose blow-offs resulting from a dislodged power steering cooler turbulator fin in some early production vehicles.According to Chrysler, a dislodged fin can occur when the turbulator is inserted into the power steering cooler or loaded into the assembly machine.A dislodged fin may block the flow of power steering fluid creating excess back-pressure in the power steering system leading to the possibility of a return hose blow-off.Chrysler and its power steering cooler supplier, Dana, modified the cooler assembly process to address factors that may contribute to hose blow-offs. The redesigned turbulator assembly stations were completely implemented in production by April 2012.During PE12-020, Chrysler identified occurrences where the power steering return hose may blow-off at the power steering cooler.This is a condition that typically occurs early in the life of the vehicle with 65% occurring at less than 2,000 miles and 96% occurring with less than 8,000 miles. The data also shows that 88% of the conditions occurred with less than 4 months in service. Over 50% of the blow-off complaints occurred on vehicles with build dates between November 22, 2011 and December 23, 2011. None of the conditions occurred with more than 12,000 miles or 7 months in service. Chrysler?s complaint analysis indicates up-to 14 additional vehicles may experience the hose blow off condition.None of the 24 unique reports with the hose blow-off condition alleged smoke or fire in the engine compartment. In the event of a blow-off, it is highly unlikely for power steering fluid to reach any of the ignition sources in the engine compartment and result in an engine fire. Complaint analysis identified five reports alleging engine compartment fires that resulted from other or unknown causes, including one attributed to an overheated transmission fluid. Two fires of unknown cause cited in the opening resume for PE12-020 involved vehicles equipped with V8 SRT 6.4L engines which are not equipped with the steering system affected by the turbulator fin concern. ODI will continue to monitor field experience in Jeep Grand Cherokee vehicles equipped with that engine.There have been no reports of loss of steering control, crashes or injuries as result of this condition.Additionally, all affected vehicles that may have experienced a hose blow-off condition were repaired under Chrysler?s 3 year/36,000 mile manufacturer?s warranty at no cost to the owner and supplier?s process improvements put in place have eliminated the likelihood of power steering hose blow offs. There is no indication of loss of motive power or unreasonable safety risk associated with the alleged defect in the subject vehicles. This preliminary evaluation is closed.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers (ODI Nos.): 10465379, 10461736, 10459178.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.