Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Other
On certain vehicles, repeated use of an interior door handle may wear the chrome plating on the upper edge of the handle. This may result in a crack or separation between the chrome plating - forming a sharp edge which could injure a user's finger. Correctio…
Read the complete source summary
On certain vehicles, repeated use of an interior door handle may wear the chrome plating on the upper edge of the handle. This may result in a crack or separation between the chrome plating - forming a sharp edge which could injure a user's finger. Correction: Dealers will inspect and, if necessary, replace interior door handles.
On certain vehicles operated in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), road salt can collect in the rear portion of the side members of the subframe and may result in int…
Read the complete source summary
On certain vehicles operated in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), road salt can collect in the rear portion of the side members of the subframe and may result in internal corrosion leading to thinning or perforation of the subframe steel. The corrosion may ultimately lead to separation of the lower control arm at the forward mounting point to the subframe. When separation occurs, in most cases, the movement of the arm will cause the axle to pull out of the transaxle and the vehicle will no longer have drive power to the wheels. In extreme cases, the wheel can also rotate off its designed axis and make contact with the fender or the wheel well. Both outcomes could result in a loss of vehicle control and a crash causing property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the front subframe assembly. Should the subframe not require replacement, drainage holes will be added, as well as treatment with rust-proofing material to arrest the corrosion process.
On certain vehicles, the fuel tank assembly valve may not close properly. If a vehicle with a fuel tank assembly valve that is not properly closed were to roll over, fuel spillage could occur. Fuel spillage in the presence of an ignition source may result in…
Read the complete source summary
On certain vehicles, the fuel tank assembly valve may not close properly. If a vehicle with a fuel tank assembly valve that is not properly closed were to roll over, fuel spillage could occur. Fuel spillage in the presence of an ignition source may result in a fire. Correction: Dealer will install an additional fuel tank assembly valve.
On certain vehicles, if the T125/70D15 compact spare tire is installed on any wheel position, the ABS feature will not operate and the ABS warning light will illuminate. Correction: Dealer will replace the spare tire with a new larger diameter T125/80R15 com…
Read the complete source summary
On certain vehicles, if the T125/70D15 compact spare tire is installed on any wheel position, the ABS feature will not operate and the ABS warning light will illuminate. Correction: Dealer will replace the spare tire with a new larger diameter T125/80R15 compact spare tire and install a new tire pressure label to provide information applicable to the T125/80R15 compact spare tire.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Sonata A4
X 2.4 L engine
10.6 L/100 km
Data unavailable
Sonata A4
X 2.7 L engine
11.5 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Sonata · A4 — source specification details
Vehicle class
Mid-size
Engine displacement
2.4 L
Cylinders
4
City fuel consumption
12.2 L/100 km
Highway fuel consumption
8.7 L/100 km
Tailpipe CO₂ emissions
244 g/km
Sonata · A4 — source specification details
Vehicle class
Mid-size
Engine displacement
2.7 L
Cylinders
6
City fuel consumption
13.3 L/100 km
Highway fuel consumption
9.4 L/100 km
Tailpipe CO₂ emissions
265 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2002 Hyundai Sonata, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2009148 (Other). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2009123 (Structure). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2004130 (Fuel System). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2002 Hyundai Sonata.
STRUCTURE
88
SUSPENSION
63
AIR BAGS
51
STEERING
24
ELECTRICAL SYSTEM
23
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
18-12
19-08
20-03
20-10
20-12
21-02
21-06
22-09
24-08
25-08
25-09
26-10
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2018-12
1
2019-08
1
2020-03
1
2020-10
1
2020-12
1
2021-02
1
2021-06
1
2022-09
1
2024-08
1
2025-08
1
2025-09
1
2026-10
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
19
25,000–49,999 mi
33
50,000–99,999 mi
76
100,000–149,999 mi
54
150,000+ mi
44
Missing or excluded mileage
94
226 of 320 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged31US complaint allegations
Fire flagged4US complaint allegations
Towed flagged9US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
25 matched manufacturer communications · 4 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA08016 · FRONT SUB-FRAME CORROSION
IN A LETTER DATED APRIL 14, 2009, HYUNDAI-KIA AMERICA TECHNICAL CENTER, INC (HYUNDAI) NOTIFIED NHTSA THAT HYUNDAIIS CONDUCTING A SAFETY RECALL OF MODEL YEAR (MY) 1999 THROUGH 2004 HYUNDAI SONATA VEHICLES MANUFACTURED PRIOR TO NOVEMBER 20, 2003 THAT ARE REGISTERED AND OPERATED IN THE FOLLOWING SALT BELT STATES AND THE DISTRICT OF COLUMBIA: CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, AND WISCONSIN.HYUNDAI IS RECALLING THE VEHICLES TO REMEDY A CONDITION WHERE INTERNAL CORROSION OF THE FRONT SUBFRAME MAY LEAD TO SEPARATION OF THE LOWER CONTROL ARM AT THE FORWARD MOUNTING POINT AND/OR SEPARATION OF THE AXLE FROM THE TRANSAXLE.THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND/OR VEHICLE DISABLEMENT. THE SUBFRAMES WILL BE INSPECTED IN THE RECALLED VEHICLES USING A PROCEDURE DEVELOPED BY HYUNDAI TO MEASURE METAL THICKNESS.PARTS WITH PERFORATIONS FROM CORROSION OR WITH METAL BELOW THE SPECIFIED THICKNESS WILL BE REPLACED WITH REDESIGNED SUBFRAMES.IF THE MINIMUM METAL THICKNESS IS MET, DRAINAGE HOLES AND RUST PROOFING MATERIAL WILL BE ADDED TO THE EXISTING SUBFRAME. ODI'S ANALYSIS OF COMPLAINT DATA REVEALED THAT 98% OF THE CONSUMER COMPLAINTS WERE FROM VEHICLES EITHER ORIGINALLY SOLD OR OPERATED IN SALTBELT STATES. SIMILARLY 99.7% OF THE WARRANTY CLAIMS WERE FROM VEHICLES ORIGINALLY SOLD OR OPERATED IN SALTBELT STATES.ODI IDENTIFIED 105 REPORTS OF LOWER CONTROL ARM DETACHMENT AND/OR AXLE SEPARATION FROM THE TRANSAXLE THROUGH ANALYSIS OF WARRANTY AND COMPLAINT INFORMATION AND CONSUMER INTERVIEWS.ONE HUNDRED THREE (103) OF THE 105 INCIDENTS INVOLVED VEHICLES IN STATES COVERED BY THE RECALL.IN ADDITION TO THE SUBJECT VEHICLES, HYUNDAI ALSO NOTED IN THE APRIL 14, 2009 LETTER THAT MY 2001 THROUGH 2004 XG300 AND XG350 WERE ALSO BEING RECALLED AS THEY WERE MANUFACTURED WITH SUBFRAMES SIMILAR IN DESIGN THE SUBJECT VEHICLES.BASED ON HYUNDAI'S DECISION TO CONDUCT A SAFETY RECALL THIS ENGINEERING ANALYSIS IS CLOSED.
THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED A PRELIMINARY EVALUATION (PE), PE05-059, BASED ON NINE CONSUMER COMPLAINTS OF TIRE VALVE STEM FAILURES.THE ALLEGED VALVE STEM FAILURES OCCURRED ONLY AFTER TIRE REPLACEMENT FROM THE ORIGINAL EQUIPMENT (OE) TIRE (MICHELIN 205/65R15 ENERGY MXV4 PLUS) TO A NON-OE? AFTERMARKET TIRE.NINETY-EIGHT PERCENT OF THE AFTERMARKET TIRES ALLEGED TO BE ASSOCIATED WITH THE TIRE VALVE STEM FAILURES WERE DETERMINED TO BE AFTERMARKET TIRES PRODUCED BY BRANDS OF MICHELIN GROUP (BF GOODRICH AND UNIROYAL).MICHELIN ISSUED A TECHNICAL BULLETIN ON SEPTEMBER 15, 2005 MAKING RETAILERS AWARE OF A POTENTIAL WHEEL COVER INCOMPATIBILITY WITH BF GOODRICH TRACTION T/AAND TOURING T/A PRO SERIES TIRES THAT COULD CAUSE WHEEL COVER MOVEMENT AND IN EXTREME CASES TIRE VALVE DAMAGE. MICHELIN HAS, ADDITIONALLY, REDESIGNED THE BF GOODRICH AND UNIROYAL TIRES ALLEGEDLY ASSOCIATED WITH THE VALVE STEM FAILURES, AS OF THE FIRST QUARTER OF CALENDAR YEAR 2006. THE PREVIOUS DESIGN VERSION OF BOTH TIRES IS NO LONGER AVAILABLE.NO COMPLAINTS HAVE BEEN SUBMITTED TO ODI FOR TIRES MANUFACTURED AFTER THE INTRODUCTION OF THE REDESIGNED TIRES.THERE HAVE BEEN NO ACCIDENTS, INJURIES OR LOSS OF VEHICLE CONTROL ATTRIBUTED TO THE ALLEGED DEFECT.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL CONTINUE TO MONITOR COMPLAINTS AND OTHER INFORMATION RELATING TO THE ALLEGED DEFECT IN THE SUBJECT VEHICLES AND TAKE FURTHER ACTION IN THE FUTURE IF WARRANTED.
THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED PRELIMINARY EVALUATION, PE08-029, ON APRIL 22, 2008, BASED ON 40 CONSUMER COMPLAINTS ALLEGING FRONT SUB-FRAME CORROSION IN MODEL YEAR (MY) 1999 THROUGH 2002 HYUNDAI SONATA VEHICLES.COMPLAINTS DESCRIBE SEVERE CORROSION OF THE VEHICLE SUB-FRAME IN THE AREA WHERE THE RIGHT-FRONT LOWER CONTROL ARM IS ATTACHED.IN SOME VEHICLES, SUB-FRAME CORROSION HAS CAUSED COMPLETE OR PARTIAL DETACHMENT OF THE CONTROL ARM, RESULTING IN WHEEL COLLAPSE OR SEPARATION. IN RESPONSE TO ODI'S INFORMATION REQUEST LETTER FOR PE08-029, HYUNDAI PROVIDED OWNER COMPLAINTS, FIELD REPORTS, AND WARRANTY CLAIM DATA FOR APPROXIMATELY 197,906 MY 1999 THROUGH 2002 SUBJECT VEHICLES SOLD OR LEASED IN THE UNITED STATES.THE BASE WARRANTY FOR THE SUBJECT VEHICLES IS 60 MONTHS OR 60,000 MILES, WHICHEVER OCCURS FIRST.ACCORDING TO HYUNDAI, PROLONGED EXPOSURE TO THE ROAD SALTS MAY RESULT IN CORROSIVE DAMAGE TO THE SUBFRAME.HYUNDAI REDESIGNED THE SUB-FRAME EARLY IN THE MY 2004 PRODUCTION (NOVEMBER 2003) TO ADDRESS PROBLEMS WITH PREMATURE CORROSION OF THE CROSSMEMBER NEAR THE RIGHT-FRONT SUSPENSION ATTACHMENT. ODI'S ANALYSIS OF BOTH COMPLAINT AND WARRANTY DATA FOR THE MY 1999 THROUGH 2002 SONATA VEHICLES SHOWS THAT THE FAILURE RATES ARE SIGNIFICANTLY HIGHER IN SALT BELT STATES, WHICH ACCOUNT FOR APPROXIMATELY 50 PERCENT OF VEHICLE SALES AND OVER 90 PERCENT OFCOMPLAINTS AND WARRANTY CLAIMS RELATED TO THE ALLEGED DEFECT (NOTE:FOR PURPOSES OF THIS INVESTIGATION THE SALT BELT INCLUDES CONNECTICUT, DELAWARE, THE DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA AND WISCONSIN).ACCORDING TO HYUNDAI, THE ALLEGED DEFECT RESULTS IN A PROGRESSIVE LOSS OF STRUCTURAL INTEGRITY OF THE SUBFRAME AND THERE IS AMPLE OPPORTUNITY FOR THE PROBLEM TO BE DETECTED (BY INSPECTION, STEERING FEEL OR TIRE WEAR ANOMALIES) AND REPAIRED BEFORE IT REACHES A STATE WHERE A SAFETY RELATED INCIDENT MAY OCCUR.HYUNDAI IDENTIFIED 4 ALLEGATIONS OF VEHICLE DISABLEMENT AND 1 ALLEGATION OF A CRASH; WHERE THE LOWER CONTROL ARM BROKE FROM THE VEHICLE WHILE DRIVING AT 55 MPH AND THE DRIVER LOST CONTROL AND DROVE INTO A YARD.THERE WERE NO REPORTED INJURIES.ODI RECEIVED A SEPARATE ALLEGATION OF A CRASH, WHERE THE COMPLAINANT ALLEGED THAT WHILE DRIVING AROUND A SLIGHT CURVE AT 65 MPH ON A FREEWAY, THE VEHICLE SUB-FRAME FRACTURED AND THE DRIVER LOST CONTROL OF THE VEHICLE AND WENT OFF THE ROAD.AGAIN, NO INJURIES WERE REPORTED.APPROXIMATELY ONE-THIRD OF THE COMPLAINTS TO ODI ALLEGE THAT THE SUB-FRAME CORROSION RESULTED IN A LOSS OF CONTROL AND/OR A VEHICLE DISABLEMENT DUE TO WHEEL COLLAPSE OR SEPARATION.THIS INVESTIGATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA08-016) COVERING MY 1999 THROUGH EARLY-2004 HYUNDAI SONATA VEHICLES IN SALT-BELT STATES AND EQUIPPED WITH THE SUBJECT SUB-FRAME DESIGN TO FURTHER ASSESS THE FREQUENCY AND SAFETY CONSEQUENCES OF THE ALLEGED DEFECT.
THE MANUFACTURER HAS ISSUED A SAFETY RECALL NOTIFICATION AS A RESULT OF THIS INVESTIGATION.THE RECALL AFFECTS 91,202 MY 2002-2003 SUBJECT VEHICLES PRODUCED FROM JANUARY 28, 2002, THROUGH MARCH 22, 2003.THE VEHICLE RECALL POPULATION WAS DEFINED BY THE MANUFACTURER'S USE OF A NEW SUPPLIER FOR THE CHROME PLATING PROCESS BEGINNING IN JANUARY 2002, AND A PRODUCTION CHANGE IN MARCH 2003 TO IMPROVE ADHESION OF THE PLATING TO THE DOOR HANDLE.VEHICLES BEING RECALLED REPRESENT 59 PERCENT OF THE TOTAL MY 2002-2003 PRODUCTION, BUT ACCOUNT FOR 91 PERCENT OF THE CONSUMER COMPLAINTS RECEIVED.THE PROCESS CHANGE FOR MY 2002 VEHICLES RESULTED IN A DRAMATIC INCREASE IN COMPLAINTS (1200 PERCENT ON A PER UNIT RATE BASIS).MY 2003 VEHICLES BUILT AFTER MARCH 2003 PRODUCTION CHANGE SHOWED A SIMILAR DECLINE IN THE COMPLAINT RATE.BASED ON THE MANUFACTURER'S ACTION, THIS INVESTIGATION HAS BEEN CLOSED.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.