CANADA · VEHICLE RESEARCH

2000 Ford Windstar

Canadian recalls & official vehicle records

A44 source configurations

Evidence updated Nov 17, 2026 · Sources

FordFord Windstar model-family photograph; generation, year and trim may differ
Model-family image · year, generation and trim may differ.Photo: IFCAR · Public domain
13Recall campaignsTransport Canada · exact matches
UnavailableCanadian complaintsNot available in our dataset
4Efficiency configurationsNRCan · Canadian test data
Source-ledResearch approachNo unsupported reliability grades
FROM RESEARCH TO YOUR NEXT CAR

2000 Ford Windstar for sale

Explore matching dealer listings in Canada. CAD prices · kilometres · Quebec excluded.

Search listings
Show matching dealer listings

Open this section to check available listings. No listing request is made until you open it.

Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.

Canadian owner complaints

Coverage, without substituted US totals.

Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.

Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.

Report a Canadian safety concern ↗

At a Glance

Source configurations, without assumed specifications.

Research marketCanada
Model year2000
Vehicle classVaries by configuration
TransmissionA4
EngineVaries by configuration
Recall sourceTransport Canada
Efficiency configurations4
VIN repair statusCheck with manufacturer
View source specifications

Safety Recalls (13)

Canadian archive snapshot, including historical or superseded records.

Other

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: …

Read the complete source summary

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

Transport Canada 2019420 · Aug 21, 2019Official notice ↗

Structure

On certain vehicles that had rear axle reinforcement brackets installed as part of safety recall 2010-284, the brackets may not have been installed properly, which could limit the effectiveness of the recall service repair in addressing the safety defect. Saf…

Read the complete source summary

On certain vehicles that had rear axle reinforcement brackets installed as part of safety recall 2010-284, the brackets may not have been installed properly, which could limit the effectiveness of the recall service repair in addressing the safety defect. Safety recall 2010-284 was conducted to address the risk that the combined effects of corrosion and stress can lead to a complete fracture of the axle. If the rear axle fractures, and the reinforcement brackets were not installed properly, vehicle handling may be adversely affected, increasing the risk of a crash. Correction: Dealers will inspect the rear axle reinforcement brackets that were installed as part of recall 2010-284. If one or both brackets are found improperly installed, the dealer will replace the rear axle.

Transport Canada 2015437 · Sep 29, 2015Official notice ↗

Suspension

On certain vehicles, the subframe may not have been properly e-coated during the manufacturing process. As a result, the subframe of vehicles originally sold, or currently registered, in areas of heavy road salt usage during winter months (Ontario, Quebec, Ne…

Read the complete source summary

On certain vehicles, the subframe may not have been properly e-coated during the manufacturing process. As a result, the subframe of vehicles originally sold, or currently registered, in areas of heavy road salt usage during winter months (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), may rust over time, resulting in reduced durability of the front lower control arm rear attaching brackets and body mount attachments at the rear of the front subframe. A separation of a front lower control arm rear attaching bracket may result in a lower control arm separation. A separation of both front subframe rear body mounts may result in diminished vehicle directional control. Either condition could result in reduced steering control, which may lead to a crash causing property damage and/or personal injury. Correction: Dealers will inspect the front lower control arm rear attaching brackets and body mount attachments at the rear of the front subframe. If the front lower control arm rear attaching brackets are not cracked, perforated, or exhibiting significant metal loss, and if the front subframe at the rear body mount locations are not cracked with metal separation aft of the rear body mount, and if the front subframe is not cracked or perforated in the area between the rear body mount and the front lower control arm rear attaching bracket, the vehicle will be returned to its owner and the owner will be notified when to return for installation of reinforcement brackets.

Transport Canada 2011038 · Jan 26, 2011Official notice ↗

Suspension

On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), the rear axle may corrod…

Read the complete source summary

On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), the rear axle may corrode and fracture. If the rear axle fractures, vehicle handling may be adversely affected, creating the risk of a crash. Correction: Dealers will install rear axle reinforcement brackets.

Transport Canada 2010284 · Aug 24, 2010Official notice ↗

Other

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new …

Read the complete source summary

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign.

Transport Canada 2009292 · Oct 14, 2009Official notice ↗

Label

Certain vehicles do not comply with the requirements of CMVSS 120. The Standard specifies that for vehicles other than passenger cars, the label information shall display after each GAWR, the size designation and, if applicable, the type designation of rims. …

Read the complete source summary

Certain vehicles do not comply with the requirements of CMVSS 120. The Standard specifies that for vehicles other than passenger cars, the label information shall display after each GAWR, the size designation and, if applicable, the type designation of rims. This information was inadvertently omitted from the compliance label affixed to the affected vehicles. Correction: Since this does not pose any safety risk, no corrective action is required.

Transport Canada 2004170 · May 20, 2004Official notice ↗

Electrical

In certain vehicles, water and other contaminants (dirt, salt, etc.) can enter into the right rear passenger compartment due to a missing body sealer condition. This could cause a short circuit in the electrical connector at the rear wire harness. A short circ…

Read the complete source summary

In certain vehicles, water and other contaminants (dirt, salt, etc.) can enter into the right rear passenger compartment due to a missing body sealer condition. This could cause a short circuit in the electrical connector at the rear wire harness. A short circuit can lead to malfunctions of the rear lighting system, reverse park-aid system, or trailer tow electrical system. A sustained short circuit can result in melted connectors, and potentially lead to a fire. Correction: dealers will inspect the electrical connector and surrounding area for absence of body sealing and corrosion. If corrosion is present, dealers will service the body gaps, repair corroded connectors, and apply a protective patch to the connector assembly and body gap. If corrosion is not present but body sealer is missing, dealers will service the body gaps and apply a protective patch to the connector assembly and body gap.

Transport Canada 2002045 · Mar 11, 2002Official notice ↗

Electrical

On certain vehicles contaminants such as water, salt, and windshield washer solution can enter the wiper motor cover assembly through pinholes on the exterior of the cover that are used in the molding process. In addition, on certain of the vehicles built betw…

Read the complete source summary

On certain vehicles contaminants such as water, salt, and windshield washer solution can enter the wiper motor cover assembly through pinholes on the exterior of the cover that are used in the molding process. In addition, on certain of the vehicles built between February and August 2000, a switch located in the plastic cover of the wiper motor gear case could malfunction and overheat. Either of these conditions could potentially result in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, smoke, or, potentially, ignition of the plastic cover material. Contaminant entry could also result in unintended wiper motor operation. Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ice obstructs the blades from returning to the "parked" position at the bottom of the windshield. Loss of visibility while driving increases the risk of a crash. Correction: Dealers will install a new wiper cover with improved sealing and water resistance.

Transport Canada 2001213 · Aug 22, 2001Official notice ↗

Electrical

On certain vehicles, if the auxiliary air-conditioning blower motor stops turning while in the medium-low blower speed setting, there is the potential that the resistor may become hot and smoke. The motor could potentially catch on fire. Correction: Dealers w…

Read the complete source summary

On certain vehicles, if the auxiliary air-conditioning blower motor stops turning while in the medium-low blower speed setting, there is the potential that the resistor may become hot and smoke. The motor could potentially catch on fire. Correction: Dealers will install a jumper wire that will ensure that the medium-low blower speed setting is protected by the thermal limiter.

Transport Canada 2001214 · Aug 22, 2001Official notice ↗

Accessories

On certain vehicles equipped with adjustable pedal option, the driver floor mat could interfere with the accelerator pedal. This can result in a stuck throttle, increasing the risk of a crash. Correction: Dealers will replace both front driver and passenger s…

Read the complete source summary

On certain vehicles equipped with adjustable pedal option, the driver floor mat could interfere with the accelerator pedal. This can result in a stuck throttle, increasing the risk of a crash. Correction: Dealers will replace both front driver and passenger side floor mats in the vehicle.

Transport Canada 2001161 · Jun 21, 2001Official notice ↗

Accessories

Certain vehicles do not comply with the requirements of CMVSS 118 - Power-operated windows, power-operated partitions and power-operated roof panels. If the key is placed in the "accessory" position and remains there for more than 70 seconds, the vehicle dela…

Read the complete source summary

Certain vehicles do not comply with the requirements of CMVSS 118 - Power-operated windows, power-operated partitions and power-operated roof panels. If the key is placed in the "accessory" position and remains there for more than 70 seconds, the vehicle delayed accessory relay remains active when the ignition switch is moved to the "off" position, and the vehicle front door is opened. Under this condition, all accessories connected to the accessory relay, including the power windows, remain operable. Correction: Dealers will reconfigure the vehicle front end electronic module.

Transport Canada 2000274 · Nov 21, 2000Official notice ↗

Fuel System

Certain vehicles may have been built with a fuel line end form that is not formed to the correct print dimensions. This could result in a lower than specified pull apart force for the installed fuel line connection. There is a remote possibility that in a cr…

Read the complete source summary

Certain vehicles may have been built with a fuel line end form that is not formed to the correct print dimensions. This could result in a lower than specified pull apart force for the installed fuel line connection. There is a remote possibility that in a crash situation, the connection may separate resulting in fuel leakage. Correction: A redundant fuel line clip will be installed on the fuel supply and return line connections at the rear of the chassis fuel line bundle.

Transport Canada 2000150 · Jul 11, 2000Official notice ↗

Visual System

On certain vehicles, the windshield and liftgate glass was installed using an incorrect urethane without the appropriate primer. This could potentially result in an adhesive bond rather than the intended molecular bond. An adhesive bond is subject to deterior…

Read the complete source summary

On certain vehicles, the windshield and liftgate glass was installed using an incorrect urethane without the appropriate primer. This could potentially result in an adhesive bond rather than the intended molecular bond. An adhesive bond is subject to deterioration over time. If the bond deteriorates, it could potentially provide less than the intended level of glass retention in the event of a vehicle crash. Correction: Windshield and liftgate glass will be replaced using the appropriate urethane installation kit.

Transport Canada 2000037 · Feb 18, 2000Official notice ↗

Check your individual VIN

Model-year recalls do not establish repair completion.

Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.

Canadian recall and VIN lookup guidance ↗
RECHECK EVIDENCE LAB

Your annual energy budget

Use official test estimates with your own distance and prices.

Enter a price to estimate your annual energy budget.

Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.

Compare Model Years

Explore documented Ford Windstar records.

Totals reflect different time on the road and configurations. Fewer reports do not establish greater reliability.

Compare vehicles side by side →

RECHECK EVIDENCE LAB

Your vehicle’s evidence passport

What to investigate first for the 2000 Ford Windstar.

1. Check recall repairs

13 matched Canadian recall campaigns. Start with the notices below and confirm applicability and repair completion for your VIN.

Review all 13 matched campaigns →

2. Know the reported themes

Canadian owner complaint totals are not available in our dataset. This is not a zero-complaint finding.

Research Canadian recalls below. Optional US complaint context is separate and does not establish Canadian experience.

Take a tailored checklist to your mechanic →
Coverage, sources and what remains unknown
Recall source
Transport Canada
Matched campaigns
13
Canadian complaint records
Unavailable
Efficiency configurations
4
Canadian investigations
Not imported
Repair completion
Not established

Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.

Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.

Specifications & Efficiency

Official source configurations. No trim is assumed.

Source configurationFuel / powertrainCombined efficiencyRange
Windstar Van
A4
X 3.0 L engine13.5 L/100 kmData unavailable
Windstar Van
A4
X 3.8 L engine13.2 L/100 kmData unavailable
Windstar Wagon
A4
X 3.0 L engine13.5 L/100 kmData unavailable
Windstar Wagon
A4
X 3.8 L engine13.5 L/100 kmData unavailable

Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.

More from the official configuration records

Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.

Windstar Van · A4 — source specification details
Vehicle classVan: Cargo
Engine displacement3.0 L
Cylinders6
City fuel consumption15.6 L/100 km
Highway fuel consumption11.0 L/100 km
Tailpipe CO₂ emissions311 g/km
Windstar Van · A4 — source specification details
Vehicle classVan: Cargo
Engine displacement3.8 L
Cylinders6
City fuel consumption14.9 L/100 km
Highway fuel consumption11.2 L/100 km
Tailpipe CO₂ emissions304 g/km
Windstar Wagon · A4 — source specification details
Vehicle classMinivan
Engine displacement3.0 L
Cylinders6
City fuel consumption15.6 L/100 km
Highway fuel consumption11.0 L/100 km
Tailpipe CO₂ emissions311 g/km
Windstar Wagon · A4 — source specification details
Vehicle classMinivan
Engine displacement3.8 L
Cylinders6
City fuel consumption15.5 L/100 km
Highway fuel consumption11.1 L/100 km
Tailpipe CO₂ emissions311 g/km

Canadian defect investigations

Check the current official Transport Canada register.

Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.

Look up Canadian investigations ↗

Before You Buy

Questions to take to a seller or qualified mechanic.

  • Verify the VIN and ask the manufacturer to confirm applicability and completion of recall repairs.
  • Ask for documentation related to the official Other campaign (2019420).
  • Ask for documentation related to the official Structure campaign (2015437).
  • Ask a mechanic to investigate any symptoms associated with reported categories; complaints alone are not a diagnosis.
  • Review service records and arrange an independent pre-purchase inspection.
Read the complete inspection checklist →
RECHECK EVIDENCE LAB

Take this to your mechanic

A research brief for the 2000 Ford Windstar, built from this report.

  1. Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
  2. Ask for repair documentation for campaign 2019420 (Other). A model-year match does not establish that this VIN is affected.
  3. Ask for repair documentation for campaign 2015437 (Structure). A model-year match does not establish that this VIN is affected.
  4. Ask for repair documentation for campaign 2011038 (Suspension). A model-year match does not establish that this VIN is affected.
  5. Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records

These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.

Reported Problem Categories

US NHTSA complaints for the 2000 Ford Windstar.

SUSPENSION
356
POWER TRAIN
271
ELECTRICAL SYSTEM
222
STRUCTURE
216
SERVICE BRAKES, HYDRAULIC
204

US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.

Reports Over Time

US complaints by filing month, latest 12 observed months.

A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.

Read chart data
2019-082
2019-092
2019-111
2019-121
2020-051
2020-121
2021-031
2021-111
2023-042
2023-081
2024-051
2025-061
RECHECK EVIDENCE LAB

The mileage lens

Where the available US complaint records fall by reported mileage.

Reported mileage at incidentMatched complaint records
Below 25,000 mi39
25,000–49,999 mi101
50,000–99,999 mi376
100,000–149,999 mi452
150,000+ mi185
Missing or excluded mileage522

1,153 of 1,675 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.

Crash flagged62US complaint allegations
Fire flagged55US complaint allegations
Towed flagged10US complaint allegations

Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.

Bulletins & Investigations

US official records; applicability in Canada is not established.

2 matched manufacturer communications · 8 matched investigations. Communications are not necessarily recalls or technical service bulletins.

EA03004 · WHEEL STUD FRACTURE

THE SUBJECT VEHICLES RANGE IN AGE FROM 4?7 YEARS IN SERVICE, WITH AVERAGE MILEAGES ESTIMATED TO RANGE FROM 50 TO 100 THOUSAND MILES.AT THESE MILEAGES, THE SUBJECT WHEELS ARE LIKELY TO HAVE BEEN REMOVED AND REINSTALLED MULTIPLE TIMES FOR VARIOUS SERVICE PROCEDURES.ODI IS CONCERNED ABOUT THE HIGH WHEEL SEPARATION RATES IN THE MY 1997-98 WINDSTAR VEHICLES EQUIPPED WITH ALUMINUM ALLOY WHEELS.HOWEVER, ANALYSIS OF FAILURE DATA INDICATES THAT MOST OF THE INCIDENTS IN THAT POPULATION OF VEHICLES OCCUR AFTER THE VEHICLES HAD ACCUMULATED 30 THOUSAND MILES OF SERVICE. THE FACTORS THAT INCREASE THE RISK THAT INADEQUATE CLAMP LOADS MAY BE ACHIEVED DURING SERVICE-RELATED WHEEL INSTALLATION ARE NOT UNIQUE TO THE SUBJECT VEHICLES.TESTING CONDUCTED BY FORD AND VRTC INDICATE THAT THE MY 1998 WINDSTAR ALUMINUM WHEEL FASTENING SYSTEM PERFORMS SIMILAR TO THE WHEEL FASTENING SYSTEMS ON PEER MINIVANS.NO DESIGN OR MANUFACTURING DEFECTS WERE IDENTIFIED IN THE WHEEL FASTENING SYSTEMS OF THE SUBJECT VEHICLES. FORD WILL SEND A MAILING TO OWNERS OF WINDSTAR VEHICLES WITH ALUMINUM WHEELS THAT HAVE HIGH WHEEL SEPARATION RATES THAT REVIEWS THE APPROPRIATE WHEEL FASTENING PROCEDURES AND STATES THAT THE WHEEL NUTS SHOULD BE TIGHTENED TO THE NOMINAL TORQUE, 100 FT-LBS (136 NM), AND RE-TIGHTENED TO THE SAME TORQUE AFTER 500 MILES.FORD?S LETTER ALSO STATES THAT IT IS ?A GOOD PRACTICE TO BE SURE THAT BEFORE INSTALLING THE WHEEL THE ALUMINUM WHEEL MOUNTING SURFACE, WHEEL LUG NUT AREA, AND THE MOUNTING FLANGE ARE FREE FROM DIRT, DEBRIS, AND LOOSE RUST TO ENSURE THE WHEEL IS SEATED CORRECTLY AND THE WHEEL LUG NUTS REMAIN FULLY TIGHTENED.? ODI WILL CONTINUE TO MONITOR THE INCIDENCE OF WHEEL FASTENER FAILURES IN THE SUBJECT VEHICLE POPULATION.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES. FOR ADDITIONAL INFORMATION, SEE THE ATTACHED CLOSING REPORT.

Opened 20030410 · Closed 20040830

Official investigation archive ↗
EA08021 · ENGINE COMPARTMENT FIRES

EA08-021 IS CLOSED WITH FORD'S ACTIONS IN RECALL 09V-399 RECALLING APPROXIMATELY 4.5 MILLION VEHICLES EQUIPPED WITH TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCHES (SCDS).WITH THIS RECALL FORD HAS NOW RECALLED ALL OF THE APPROXIMATE 16 MILLION FORD MODEL VEHICLES THAT WERE MANUFACTURED FROM MY 1992 THROUGH 2003 WITH A TEXAS INSTRUMENTS SCDS.NHTSA WILL CONTINUE TO MONITOR THE RECALLED VEHICLES TO ENSURE REMEDIES INSTALLED BY FORD TOMITIGATE THE POTENTIAL FOR SCDS RELATED FIRES ARE EFFECTIVE.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.SEE ATTACHED CLOSING REPORT FOR FURTHER DETAILS.

Opened 20080917 · Closed 20091014

Official investigation archive ↗
EA10007 · Front Subframe Corrosion Failures

In a January 26, 2011 Defect Information Report, Ford Motor Company (Ford) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall to address corrosion related fractures in the front lower control arm rear attaching brackets and body mount attachments at the rear of the front subframe in approximately 425,288 model year (MY) 1999 through 2003 Ford Windstar vehicles manufactured from April 1998 to July 2003 and either sold or currently registered in the following high corrosion (Salt-Belt) states:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Utah, Vermont, West Virginia and Wisconsin (NHTSA Recall No. 11V-030, Ford Recall No. 11S16).According to Ford, separation of a front lower control arm rear attaching bracket may result in a lower control arm separation and separations of both front subframe rear body mounts may result in separation of the steering intermediate shaft.Either condition could result in diminished vehicle directional control, increasing the risk of a crash.Dealers will inspect the lower control arm rear attachment flanges and the rear body mount sections of the subframe on the right (passenger) and left (driver) sides of the vehicle.Owners of vehicles that pass the inspection will be notified when to return for installation of reinforcement brackets to extend the durability of the front subframe assembly in affected areas in the presence of corrosion.Owners of vehicles that do not pass inspection, but can be repaired, will be offered transportation until parts become available.Repurchase offers will be extended to owners of vehicles that cannot be repaired with the reinforcement brackets.This investigation is closed.

Opened 20101220 · Closed 20110317

Official investigation archive ↗
PE02085 · WHEEL STUD FRACTURE

ANALYSIS OF ODI AND FORD DATA HAS IDENTIFIED 1619 INCIDENTS OF WHEEL STUD FRACTURE IN MY 1998 THROUGH 2000 FORD WINDSTAR VEHICLES, INCLUDING 69 WHEEL SEPARATIONS AND 11 CRASHES.FORD HAS NOT BEEN ABLE TO IDENTIFY ANY DESIGN OR MANUFACTURING DEFECTS IN ITS ANALYZIS OF THE PROBLEM.FORD MAINTAINS THAT THE FAILURES ARE CAUSED BY EITHER:(1) INADVERTENT OVERTORQUING OF LUG NUTS DURING REMOVAL OR INSTALLATION; OR (2) FATIGUE DUE TO INSUFFICIENT CLAMP LOAD BETWEEN THE WHEEL AND THE BRAKE ROTOR OR DRUM AND HUB ASSEMBLY.ACCORDING TO FORD, CORROSION, DIRT, OR DAMAGE PRESENT ON THE ROAD WHEEL AT THE NUT INTEFACE COULD CONTRIBUTE TO THE LATTER CONDITION. ANALYSIS OF ODI COMPLAINT DATA INDICATES THAT THE SUBJECT VEHICLES EXPERIENCE WHEEL STUD FAILURES AT SIGNIFICANTLY HIGHER RATES THAN PEER MINIVANS.THIS INVESTIGATION HAS BEEN UPGRADED TO FURTHER ASSESS THE FREQUENCY, SCOPE, AND TREND OF THE ALLEGED DEFECT CONDITION IN MY 1997 THROUGH 2000 WINDSTAR MINIVANS.

Opened 20021118 · Closed 20030410

Official investigation archive ↗
Communication 10205035

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10205030

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗

Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.

Sources & Last Updated

Trace the evidence behind this report.

Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.
US communications & investigations · Official datasets · Communications received 2020–2026, exact matches; investigations full-history export.