Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Seats And Restraints
Issue:
On certain vehicles, the driver and passenger-front seat belt pretensioner cable could corrode over time. As a result, the cable could break and the seat belt may not hold a person during a crash.
Safety Risk:
A seat belt that doesn't work properly c…
Read the complete source summary
Issue:
On certain vehicles, the driver and passenger-front seat belt pretensioner cable could corrode over time. As a result, the cable could break and the seat belt may not hold a person during a crash.
Safety Risk:
A seat belt that doesn't work properly could increase the risk of injury in a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the seat belt(s). The dealer will also modify the floor covering around the seat belt anchor pretensioner cables.
Issue:
On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse.
Note: For certain models, this rec…
Read the complete source summary
Issue:
On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse.
Note: For certain models, this recall also affects incomplete vehicles.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rearview camera.
Issue:
Ford Motor Company of Canada is conducting a parts recovery campaign targeting a random sample of 2015-2017 Ford Mustang vehicles in the Montreal area built between February 11, 2014 and October 2, 2017. The driver and front passenger seat belt assembl…
Read the complete source summary
Issue:
Ford Motor Company of Canada is conducting a parts recovery campaign targeting a random sample of 2015-2017 Ford Mustang vehicles in the Montreal area built between February 11, 2014 and October 2, 2017. The driver and front passenger seat belt assemblies are being recovered to aid in Ford's analysis in support of Transport Canada defect investigation file no. 3280-38-20.
Note: This action is not being conducted under the requirements of the Motor Vehicle Safety Act.
Safety Risk:
No safety defect has been identified with these seat belts.
Corrective Actions:
Ford will notify select owners by mail and advise them to take their vehicle to a dealership to replace the driver and front passenger seat belts at no charge.
Issue:
On certain vehicles, opening and closing the trunk lid could damage the wiring for the rearview camera. If this happens, the rearview camera image may not display properly when you shift to reverse. Also, there could be a problem with the connections i…
Read the complete source summary
Issue:
On certain vehicles, opening and closing the trunk lid could damage the wiring for the rearview camera. If this happens, the rearview camera image may not display properly when you shift to reverse. Also, there could be a problem with the connections inside the rearview camera.
Safety Risk:
A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rearview camera and/or inspect and repair the decklid wiring.
This equipment recall is for replacement parts that were sold or installed by Ford dealerships between October 2019 and August 2020. This recall is not being conducted under the requirements of the Motor Vehicle Safety Act.
Issue:
On certain cars, the brake…
Read the complete source summary
This equipment recall is for replacement parts that were sold or installed by Ford dealerships between October 2019 and August 2020. This recall is not being conducted under the requirements of the Motor Vehicle Safety Act.
Issue:
On certain cars, the brake pedal and bracket assembly could fracture if rapid and forceful pressure is applied to the brake pedal, as typically seen during track and competition driving. If this happens, there could be a loss of braking.
Note: This equipment recall only affects the following brake pedal and bracket assembly part numbers:
FR3Z-2455-AA
FR3Z-2455-AB
Safety Risk:
A loss of brakes can create the risk of a crash.
Corrective Actions:
Ford will notify its dealers of this recall. While dealers will attempt to contact people who may have purchased a part affected by this recall, if you have had the brake pedal and bracket assembly replaced on your car, you should contact the dealer that sold or installed it to find out if it is affected by this recall. Any part that is affected by this recall will be replaced, free of charge.
On certain vehicles equipped with 5.2 litre V8 engines, the engine oil cooler tube assembly may have insufficient crimps. This could lead to a hose separating, which would cause an oil leak. The sudden loss of engine oil could result in an engine failure causi…
Read the complete source summary
On certain vehicles equipped with 5.2 litre V8 engines, the engine oil cooler tube assembly may have insufficient crimps. This could lead to a hose separating, which would cause an oil leak. The sudden loss of engine oil could result in an engine failure causing a loss of motive power, and an oil leak, in the presence of an ignition source could result in a fire. Both of these conditions could increase the risk of injury and/or property damage. Correction: Dealers will replace the engine oil cooler tube assembly.
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards (CMVSS) 210.1 - User-ready Tether Anchorages for Restraint Systems and (CMVSS) 209 – Seat Belt Assemblies. Front and rear seat belts may have been damaged prior to …
Read the complete source summary
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards (CMVSS) 210.1 - User-ready Tether Anchorages for Restraint Systems and (CMVSS) 209 – Seat Belt Assemblies. Front and rear seat belts may have been damaged prior to installation and may fail to conform to CMVSS 209 assembly performance standards, and the strength requirements of the CMVSS 210.1 standard. These issues could result in the belts not adequately restraining occupants in a crash, increasing the risk of injury and/or damage to property. Correction: Dealers will replace both front seatbelt retractors and pretensioners as well as both rear seatbelt retractors, rear seatbelt buckles, and rear child safety seat tether anchors.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Mustang AS6
X 2.3 L engine
9.4 L/100 km
Data unavailable
Mustang M6
X 2.3 L engine
9.2 L/100 km
Data unavailable
Mustang AS6
X 3.7 L engine
10.7 L/100 km
Data unavailable
Mustang M6
X 3.7 L engine
11.2 L/100 km
Data unavailable
Mustang AS6
X 5.0 L engine
12.4 L/100 km
Data unavailable
Mustang M6
X 5.0 L engine
12.7 L/100 km
Data unavailable
Mustang Convertible AS6
X 2.3 L engine
10.0 L/100 km
Data unavailable
Mustang Convertible AS6
X 5.0 L engine
13.0 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2016 Ford Mustang, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2025484 (Seats And Restraints). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2025449 (Visual System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2024605 (Seats And Restraints). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2016 Ford Mustang.
ENGINE
76
ELECTRICAL SYSTEM
73
UNKNOWN OR OTHER
70
BACK OVER PREVENTION
52
POWER TRAIN
29
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-09
25-10
25-12
26-01
26-02
26-03
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-09
2
2025-10
1
2025-12
2
2026-01
4
2026-02
5
2026-03
3
2026-06
4
2026-07
2
2026-08
4
2026-09
5
2026-10
2
2026-11
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
73
25,000–49,999 mi
53
50,000–99,999 mi
69
100,000–149,999 mi
8
150,000+ mi
1
Missing or excluded mileage
177
204 of 381 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged13US complaint allegations
Fire flagged7US complaint allegations
Towed flagged24US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
54 matched manufacturer communications · 1 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA21002 · Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.