Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Powertrain
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 18S07 (Transport Canada recall no. 2018-129) may not have been done correctly. As a result, a second repair is required.
Note: This recall only affects vehicles equipped w…
Read the complete source summary
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 18S07 (Transport Canada recall no. 2018-129) may not have been done correctly. As a result, a second repair is required.
Note: This recall only affects vehicles equipped with a 1.0 L or 1.6 L engine and a manual transmission.
On certain vehicles, repeated clutch slipping could cause the pressure plate to fracture. If this happens, transmission fluid could leak onto hot components in the engine compartment.
Safety Risk:
Oil that leaks onto hot components can create the risk of a fire. Additionally, an oil leak could create a hazard for others and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the system software to detect and prevent prolonged clutch slip. For certain vehicles, the dealer will also inspect and, if necessary, replace the clutch assembly.
Issue:
On certain vehicles, the front brake hoses could fail and cause a progressive brake fluid leak. If this happens, the driver may experience a change in brake pedal feel and travel. This can cause reduced braking.
Note: A brake fluid leak would cause th…
Read the complete source summary
Issue:
On certain vehicles, the front brake hoses could fail and cause a progressive brake fluid leak. If this happens, the driver may experience a change in brake pedal feel and travel. This can cause reduced braking.
Note: A brake fluid leak would cause the brake warning light to turn on. This recall doesn't affect models with a Hybrid engine. Vehicles repaired under Ford warranty extension program 22N02 already have updated brake hoses, and don't require this repair.
Safety Risk:
Reduced braking can cause an extended stopping distance and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the front brake hoses.
Issue:
On certain vehicles, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driv…
Read the complete source summary
Issue:
On certain vehicles, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driver attempts to exit the vehicle while the transmission is not in Park, and the parking brake is not applied, the vehicle could move suddenly.
Safety Risk:
Sudden and unexpected movement of the vehicle could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the transmission shifter cable bushing and install a protective service cap. Ford advises that you should apply the parking brake each time the vehicle is parked.
Issue:
On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. This recall applies to vehicles originally sold or currently registered in…
Read the complete source summary
Issue:
On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador).
Safety Risk:
A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to replace the bolts and apply a wax sealer. If one or more of the bolts are broken or missing, a new steering gear will be installed.
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: …
Read the complete source summary
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Safety Risk:
Glass that breaks in to large pieces could create a risk of injury.
Corrective Actions:
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Issue:
On certain cars equipped with a 2.5 litre engine, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear…
Read the complete source summary
Issue:
On certain cars equipped with a 2.5 litre engine, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driver attempts to exit the car while the transmission is not in Park, and the parking brake is not applied, the car could move suddenly.
Safety Risk:
Sudden and unexpected movement of the car could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to replace the transmission shifter cable bushing and install a protective service cap. Ford advises that you should apply the parking brake each time the vehicle is parked.
Certain plug-in hybrid and electric vehicles were supplied with a 120V convenience charge cord that may be susceptible to overheating if there is a poor connection at the electrical outlet. This could result in increased cord temperatures, melting, and an incr…
Read the complete source summary
Certain plug-in hybrid and electric vehicles were supplied with a 120V convenience charge cord that may be susceptible to overheating if there is a poor connection at the electrical outlet. This could result in increased cord temperatures, melting, and an increased risk of fire causing injury and/or damage to property. Correction: Dealers will replace the factory supplied 120V convenience cord with the latest version of the cord that includes thermal protection.
On certain vehicles, the bushing that attaches the shift cable to the transmission may degrade over time and could detach. This could allow the transmission to be in a gear state different than the gear shift position selected by the driver. This condition cou…
Read the complete source summary
On certain vehicles, the bushing that attaches the shift cable to the transmission may degrade over time and could detach. This could allow the transmission to be in a gear state different than the gear shift position selected by the driver. This condition could also allow the driver to move the shifter to Park and remove the ignition key while the transmission gear may not be in Park. If the parking brake is not applied, this could result in unintended vehicle movement, which would increase the risk of crash causing injury and/or damage to property. Correction: Dealers will replace the shifter cable bushing.
On certain vehicles equipped with 1.0L GTDI or 1.6L GTDI engines and manual transmissions, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping …
Read the complete source summary
On certain vehicles equipped with 1.0L GTDI or 1.6L GTDI engines and manual transmissions, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak. A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. For the Fusion model, dealers will replace the clutch assembly.
On certain vehicles, the door latches may have a broken pawl spring tab. This could result in the door not latching correctly. As a result, doors which appear to be latched could unlatch while driving. This could increase the risk of injury to a vehicle occ…
Read the complete source summary
On certain vehicles, the door latches may have a broken pawl spring tab. This could result in the door not latching correctly. As a result, doors which appear to be latched could unlatch while driving. This could increase the risk of injury to a vehicle occupant seated next to the door, or result in damage to property. Correction: Dealers will replace all four door latches with a more robust part. Note: This is an expansion of recall 2015-175.
On certain vehicles equipped with 1.6L GTDI engines, low coolant level could lead to localized overheating of the cylinder head, which could cause a fire. This could increase the risk of injury and/or damage to property. Correction: Dealers will install a cool…
Read the complete source summary
On certain vehicles equipped with 1.6L GTDI engines, low coolant level could lead to localized overheating of the cylinder head, which could cause a fire. This could increase the risk of injury and/or damage to property. Correction: Dealers will install a coolant level sensor and supporting hardware and software. Note: Until repair parts are available, owners should regularly check engine coolant level and top up as necessary. Also note for Fiesta, only the ST model vehicles are affected.
On certain vehicles, deployment of the driver or front passenger seatbelt pretensioner in a crash may generate internal pretensioner temperatures that can degrade the tensile strength of the outboard seat belt anchor cable. This could result in the seat belt n…
Read the complete source summary
On certain vehicles, deployment of the driver or front passenger seatbelt pretensioner in a crash may generate internal pretensioner temperatures that can degrade the tensile strength of the outboard seat belt anchor cable. This could result in the seat belt not adequately restraining the seat occupant in a crash, increasing the risk of injury and/or damage to property. Correction: Dealers will apply a coating to protect the pretensioner's cables.
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur at th…
Read the complete source summary
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur at the steering gear motor attachment bolts. Steering gear motor detachment from the gear housing could result in sudden loss of steering power assist. This would cause the Electronic Stability Control and Traction Control malfunction indicator lamps to illuminate. A vehicle experiencing a loss of steering power assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. A loss of steering power assist could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will apply sealer and replace the steering gear motor attachment bolts as required. If one or more of the steering gear motor attachment bolds are broken or missing, a new steering gear will be installed in the vehicle.
On certain vehicles, the door latches may have a broken pawl spring tab. This could result in the door not latching correctly. As a result, doors which appear to be latched could unlatch while driving. This could increase the risk of injury to a vehicle occ…
Read the complete source summary
On certain vehicles, the door latches may have a broken pawl spring tab. This could result in the door not latching correctly. As a result, doors which appear to be latched could unlatch while driving. This could increase the risk of injury to a vehicle occupant seated next to the door, or result in damage to property. Correction: Dealers will replace all four door latches with a more robust part.
On certain vehicles, sealant applied to the restraints control module could fail, allowing moisture to enter the module circuit board. This could cause corrosion to form, which will illuminate the airbag warning light and could affect restraint system function…
Read the complete source summary
On certain vehicles, sealant applied to the restraints control module could fail, allowing moisture to enter the module circuit board. This could cause corrosion to form, which will illuminate the airbag warning light and could affect restraint system function, potentially disabling airbags or other safety systems. This could increase the risk of injury to vehicle occupants in a crash where airbag deployment is warranted. Correction: Dealers will replace the restraints control module.
Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard 207 – Anchorage of Seats. The front driver and passenger seatback recliner mechanism may separate from the seatback frame due to improper welding. If this were to…
Read the complete source summary
Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard 207 – Anchorage of Seats. The front driver and passenger seatback recliner mechanism may separate from the seatback frame due to improper welding. If this were to occur, the seatback could become noisy, loose or begin leaning and could fail to meet the strength requirements of the standard. This could increase the risk of injury in a crash. Correction: Dealers will replace the seatback assemblies.
On certain vehicles, the fuel delivery module may develop a crack which could allow fuel to leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the…
Read the complete source summary
On certain vehicles, the fuel delivery module may develop a crack which could allow fuel to leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel delivery module.
On certain vehicles, the steering gear may have been assembled incorrectly and could fail. If this occurs, the driver may suddenly lose the ability to steer the vehicle, which could result in a crash causing property damage and/or personal injury. Correction…
Read the complete source summary
On certain vehicles, the steering gear may have been assembled incorrectly and could fail. If this occurs, the driver may suddenly lose the ability to steer the vehicle, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the steering gear assembly.
Certain vehicles equipped with 1.6L engines may experience a fire originating in the engine compartment, while the engine is running, caused by the engine overheating that results in flammable fluid leaks coming into contact with the hot exhaust system. This c…
Read the complete source summary
Certain vehicles equipped with 1.6L engines may experience a fire originating in the engine compartment, while the engine is running, caused by the engine overheating that results in flammable fluid leaks coming into contact with the hot exhaust system. This could result in property damage and/or injury. Correction: Dealers will reprogram the Powertrain Control Module and the Instrument Panel Cluster module to improve the system’s ability to detect and mitigate an overheating condition. Dealers will also inspect for coolant leaks and make any necessary corrections.
On certain vehicles, the headlamp low beam projector coating may not have properly cured during the manufacturing process. Over time, this could cause the coating to become hazy, reducing the brightness of the low beam lamps. Dim headlamps may result in redu…
Read the complete source summary
On certain vehicles, the headlamp low beam projector coating may not have properly cured during the manufacturing process. Over time, this could cause the coating to become hazy, reducing the brightness of the low beam lamps. Dim headlamps may result in reduced illumination of the roadway and its users, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the headlamp assemblies.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Fusion Energi AV
B/X / X 2.0 L engine
2.7 ([23.2 kWh + 0.1 L]/100 km) Le/100 km Source fuel mode: 6.1 L/100 km
Source range 1: 32 km Source range 2: 856 km
Fusion AS6
X 1.6 L engine
8.5 L/100 km
Data unavailable
Fusion (Start-Stop) AS6
X 1.6 L engine
8.3 L/100 km
Data unavailable
Fusion M6
X 1.6 L engine
8.0 L/100 km
Data unavailable
Fusion AS6
X 2.0 L engine
9.0 L/100 km
Data unavailable
Fusion AS6
X 2.5 L engine
8.9 L/100 km
Data unavailable
Fusion AWD AS6
X 2.0 L engine
9.4 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2013 Ford Fusion, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2026281 (Powertrain). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2023132 (Brakes). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2022311 (Powertrain). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2013 Ford Fusion.
STEERING
389
ENGINE
386
POWER TRAIN
281
UNKNOWN OR OTHER
184
STRUCTURE
164
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-12
1
2026-01
7
2026-02
5
2026-03
5
2026-04
3
2026-05
5
2026-06
1
2026-07
6
2026-08
3
2026-09
4
2026-10
1
2026-11
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
178
25,000–49,999 mi
204
50,000–99,999 mi
525
100,000–149,999 mi
321
150,000+ mi
98
Missing or excluded mileage
467
1,326 of 1,793 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged63US complaint allegations
Fire flagged91US complaint allegations
Towed flagged135US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
45 matched manufacturer communications · 5 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA15002 · Door Latch Failure
The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of doors failing to latch and/or inadvertently opening on model year (MY) 2011-2013 Ford Fiesta, MY 2013 Ford Fusion and MY 2013 Lincoln MKZ vehicles. All of the affected vehicles share the same door latch design.ODI has received 281 unique reports related to the alleged problem, with over 100 claiming that the door(s) opened inadvertently while the vehicle was in motion. There were no crashes reported however three separate injuries were indicated, all caused by a rebounding door striking a consumer after they attempted to close it. In response to ODI's Information Request (IR) letter, Ford Motor Company (Ford) responded with 1,102 unique reports related to the alleged problem. There were no injury claims but there were two claims of low speed accidents occurring involving the door opening while driving and damaging property. Ford also submitted 10,883 warranty claims related to door latch failures.Many customers indicated that the door would not latch at all and accordingly they decided to restrain the door by other means (looping the seatbelt through the door, or using rope or tape) in order to drive the vehicle.Some customers also reported multiple door latch failures occurring on the same vehicle on different doors occurring months apart.On April 23rd, 2015 Ford notified ODI that it would conduct a safety recall (15V-246) to remedy door latches failures on certain MY 2011-2014 Ford Fiesta and MY 2013-2014 Ford Fusion and Lincoln MKZ vehicles.According to Ford, the pawl spring tab located within the door latch can break off, or separate and result in a ?door will not close condition.The recalled vehicles include Fiesta vehiclesmanufactured from the start of the MY 2011 to May 2013 and Fusion and MKZ vehicles manufactured from the start of the MY 2013 year until May 2013.In May 2013 Ford reports that it made a manufacturing quality control change, specific to the spring tab, to improve the performance of the existing part.The door latch spring tab was redesigned and the new latch was phased into production in December 2014 with a new part number.Ford will replace all four door latches on the affected vehicles with the new latch design currently in production.The recall action initiated by the manufacturer appears to address the safety risks of concern to ODI.Accordingly, the investigation is closed.The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the identification (ODI) numbers found in the attached list.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this investigation, Ford identified a condition in subject vehicles equipped with 2.5L and 3.0L engines that may result in a sudden reduction of engine power.According to Ford, the ETB internal motor contacts may develop a high resistance material buildup condition on the commutator, resulting in intermittent electrical connectivity and reduced engine power. When this condition occurs, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a limited limp home mode.Ford?s trade name for the feature is Failure Mode Effects Management (FMEM) mode.In this mode, engine power and vehicle speed are reduced, while full function of the power steering, power braking, lighting, and climate control systems are maintained.ODI?s complaint analysis indicate that the predominant failure mode involved reduced motive power associated with the limited limp home mode with engine speeds limited to approximately 900 RPM. Analysis of warranty claims provided by Ford identified 59,807 claims related to ETB replacements and approximately 50 percent of claims are associated with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed.Ford described several factors where the ETB motor may fail resulting in DTCs P2111 or P2112 but the failure is not an existing stuck open or closed ETB valve position.According to Ford, the ETB control strategy provides the driver with three FMEM modes that allow varying degrees of vehicle mobility depending on the severity of the fault detected.DTCs associated with stuck open or closed throttle valves are designated the highest failure severity resulting in engine speeds limited to high idle corresponding to the limited limp home mode.Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability.Other FMEM limp modes may result in reduced engine performance but will maintain vehicle speed above 20mph. During this investigation, Ford and its suppliers, Delphi and Igarashi, updated the powertrain control module (PCM) software to include a throttle body motor cleaning cycle during key-on and modified the ETB internal motor components design, surface finish and material composition to improve durability. Additionally, Ford developed a remedy procedure and issued a special Customer Satisfaction Program (CSP) 13N03 extending the ETB warranty coverage and instructing dealers to update the powertrain calibration to improve vehicle performance in the event that intermittent electrical connectivity of the throttle body motor contacts occurs. The program extends the coverage for up to 10 years of service or 150,000 miles from the warranty start date of the vehicle, all vehicles are eligible for the program through January 31, 2015 regardless of mileage.Owners of the affected vehicles will be contacted by mail to take their vehicle to a Ford dealer who will reprogram the PCM to the latest calibration. The bulletin was sent to dealers on January 17, 2014 and the owner letter mailing began on January 27, 2014. See the investigative file for copies of Ford's bulletin and owner letter. This preliminary evaluation is closed. The closing of this investigation does not constitute a finding that
In December 2019, the Office of Defects Investigation (ODI) opened this investigation based on 235 Vehicle Owner Questionnaires (VOQs) alleging doors failed to latch when closed, and/or inadvertently opened while driving, on model year (MY) 2012-2014 Ford Fiesta, and 2013-2014 Fusion and Lincoln MKZ. Some VOQs reported the failure occurred after the latch had been remedied under a prior recall which involved fracture of the latch pawl spring tab due to thermally induced cyclic fatigue. Other VOQs alleged a similar failure in vehicles not previously recalled. A latch with a fractured pawl spring tab typically results in a ?door will not close? condition, however in certain somewhat rare circumstances, may result in the door coming open while driving. In response to ODI?s investigation, Ford has announced three field actions, as discussed below.On March 23, 2020, Ford submitted Safety Recall 20V-177 (Ford 20S15), a regional recall campaign to address door latch failures in vehicles not previously recalled under Safety Recalls 15V-246, 16V-643 and 17V-210. The recall affects vehicles currently or ever registered in certain high ambient temperature states (see 20V-177 for affected states). As a remedy, Ford will replace all four door latches free of charge.On August 24, 2020, Ford issued a non-safety regional field action (Ford 20R01) to address door latch failures on the same model/MY vehicles not covered under 20V-177 (i.e., not currently/ever registered in affected states). According to Ford, spring tab failure rates for vehicles covered by this action are about half that of the 20V-177 vehicles. Under this action, dealers will replace all door latches, free of charge, if either; a) the vehicle exhibits a related latch concern, or b) if the vehicle owner expresses a concern about the latches in their vehicles. Details can be found under NHTSA TSB No. 10190990, a copy of which is available in this investigative file available at NHTSA.gov.On June 8, 2020, Ford submitted Safety Recall 20V-331 (Ford 20S30) addressing vehicles previously remedied under NHTSA Recalls 15V-246, 16V-643 and 17V-210, where the repair may not have been properly completed, specifically not all of the door latches were replaced, or replaced correctly. This recall involves an inspection of the latches, with the option for a consumer self-inspection; owners could view the date codes on their latches (and confirm child safety locks are present on the rear doors) and then submit the information to Ford?s mobile app or website. A dealership inspection option was also available. Any vehicle found to have unreplaced defective latches requires the replacement of all door latches as directed by Ford.Regarding the 4,494 reports cited above, 1,485 involve scope-related failures (with 13% alleging door opening), and the remaining 3,009 reports involving remedy concerns (with 18% alleging door opening - note ODI was unable to verify the allegations of door opening). The three ODI injuries were all relatively minor. Ford?s reported injury incidences include one (unconfirmed) report of an ejection, three minor injuries with the others involving undisclosed injuries. Ford?s crashes involved two (unconfirmed) crashes alleging the incident door contacted another vehicle and three involving doors striking other property.The recalled vehicles include MY 2011-2015 Ford Fiesta, 2013-2016 Ford Fusion and Lincoln MKZ, 2015 Ford Mustang and Lincoln MKC, 2013-2015 Ford Escape and Ford C-MAX, 2012-2015 Ford Focus and 2014-2016 Ford Transit Connect.Ford's actions address ODI's concerns at this time. ODI will take further action if warranted by new information. The reference (OD
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.