Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Airbag
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force…
Read the complete source summary
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Ford will notify owners by mail. The corrective actions for this recall are under development.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Issue:
On certain cars, a problem with the hydraulic control unit for the anti-lock brake system (ABS) could cause increased brake pedal travel.
Safety Risk:
Increased brake pedal travel could increase the risk of a crash.
Corrective Actions:
The compa…
Read the complete source summary
Issue:
On certain cars, a problem with the hydraulic control unit for the anti-lock brake system (ABS) could cause increased brake pedal travel.
Safety Risk:
Increased brake pedal travel could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to inspect the ABS module assembly. The system will be flushed with DOT 4 brake fluid, and if necessary, the hydraulic control unit will be replaced. Dealers will also replace the DOT 3 reservoir cap with a new DOT 4 cap.
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more fo…
Read the complete source summary
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Additional note: This recall supersedes recalls 2016-347 (Ford Safety Improvement Program 16S26), 2017-024 (Ford Recall 17S01) and 2018-035 (Ford Recall 18S01). Vehicles repaired under the previous recalls do not require repair under this recall.
Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will r…
Read the complete source summary
Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will replace the driver or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a Ford dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Program is superseded by recall 2019005 (Ford Recall 19S01). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019005">recall 2019005</a> for more information.
On certain vehicles equipped with Canister Purge Valves (CPV's), the valve may not operate properly. This could result in pressure changes inside the fuel tank which may result in a fatigue crack in the upper surface of the metal fuel tank, resulting in seep…
Read the complete source summary
On certain vehicles equipped with Canister Purge Valves (CPV's), the valve may not operate properly. This could result in pressure changes inside the fuel tank which may result in a fatigue crack in the upper surface of the metal fuel tank, resulting in seepage of fuel, or fuel vapor. Fuel leakage, in the presence of an ignition source, could lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the canister purge valve and tank.
A safety defect may exist in Ford aftermarket all-weather floor mats sold as accessories or service replacement parts for 2006-2011 Ford Fusion, Lincoln Zephyr, and Lincoln MKZ vehicles. The floor mats are secured by a single retention device, which could allo…
Read the complete source summary
A safety defect may exist in Ford aftermarket all-weather floor mats sold as accessories or service replacement parts for 2006-2011 Ford Fusion, Lincoln Zephyr, and Lincoln MKZ vehicles. The floor mats are secured by a single retention device, which could allow the driver's floor mat to move out of position and interfere with the accelerator pedal. If this occurs, the accelerator pedal could fail to return to idle. This could result in a crash causing injury and/or property damage. Correction: Dealers will replace Ford aftermarket all-weather floor mats with an updated design having two retention devices.
On certain vehicles, the 17 inch steel wheels, whether factory installed or sold as accessory replacement parts, may experience a reduction in wheel stud clamp load. This can cause wheel stud failure, which could result in wheel separation. A wheel separatin…
Read the complete source summary
On certain vehicles, the 17 inch steel wheels, whether factory installed or sold as accessory replacement parts, may experience a reduction in wheel stud clamp load. This can cause wheel stud failure, which could result in wheel separation. A wheel separating from the vehicle could cause a loss of control and a crash. In addition, the errant wheel assembly could strike a vehicle, a stationary object, or a bystander. These issues could result in property damage and/or personal injury. Correction: Dealers will replace the lug nuts on all four wheels. They will also inspect the rear brake rotors and replace them as necessary.
On certain vehicles, the automatic transmission's park rod guide retention pin may not have been properly installed. If the pin not installed properly, the park rod guide may become displaced, preventing the transmission park pawl from engaging when shifted i…
Read the complete source summary
On certain vehicles, the automatic transmission's park rod guide retention pin may not have been properly installed. If the pin not installed properly, the park rod guide may become displaced, preventing the transmission park pawl from engaging when shifted into "PARK". This could allow vehicle movement and result in property damage or personal injury to bystanders. Correction: Dealers will inspect and, if necessary, install the missing park rod guide retention pin.
On certain vehicles, the manual recliner mechanisms may have a gear plate teeth out of dimensional specifications, which could result in limited pawl to gear plate tooth engagement and create additional movement to the seat back. Correction: Dealers will repl…
Read the complete source summary
On certain vehicles, the manual recliner mechanisms may have a gear plate teeth out of dimensional specifications, which could result in limited pawl to gear plate tooth engagement and create additional movement to the seat back. Correction: Dealers will replace the front seat manual recliner mechanism(s).
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Fusion A6
X 2.5 L engine
9.4 L/100 km
Data unavailable
Fusion M6
X 2.5 L engine
9.6 L/100 km
Data unavailable
Fusion S A6
X 2.5 L engine
8.8 L/100 km
Data unavailable
Fusion S M6
X 2.5 L engine
9.4 L/100 km
Data unavailable
Fusion AS6
X 3.0 L engine
10.8 L/100 km
Data unavailable
Fusion AS6
E 3.0 L engine
14.9 L/100 km
Data unavailable
Fusion AWD AS6
X 3.0 L engine
11.5 L/100 km
Data unavailable
Fusion AWD AS6
E 3.0 L engine
15.5 L/100 km
Data unavailable
Fusion AWD AS6
X 3.5 L engine
12.3 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Fusion · A6 — source specification details
Vehicle class
Mid-size
Engine displacement
2.5 L
Cylinders
4
City fuel consumption
10.8 L/100 km
Highway fuel consumption
7.6 L/100 km
Tailpipe CO₂ emissions
216 g/km
Fusion · M6 — source specification details
Vehicle class
Mid-size
Engine displacement
2.5 L
Cylinders
4
City fuel consumption
10.8 L/100 km
Highway fuel consumption
8.2 L/100 km
Tailpipe CO₂ emissions
221 g/km
Fusion S · A6 — source specification details
Vehicle class
Mid-size
Engine displacement
2.5 L
Cylinders
4
City fuel consumption
10.2 L/100 km
Highway fuel consumption
7.0 L/100 km
Tailpipe CO₂ emissions
202 g/km
Fusion S · M6 — source specification details
Vehicle class
Mid-size
Engine displacement
2.5 L
Cylinders
4
City fuel consumption
10.9 L/100 km
Highway fuel consumption
7.5 L/100 km
Tailpipe CO₂ emissions
216 g/km
Fusion · AS6 — source specification details
Vehicle class
Mid-size
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
12.6 L/100 km
Highway fuel consumption
8.7 L/100 km
Tailpipe CO₂ emissions
248 g/km
Fusion · AS6 — source specification details
Vehicle class
Mid-size
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
17.3 L/100 km
Highway fuel consumption
11.9 L/100 km
Tailpipe CO₂ emissions
238 g/km
Fusion AWD · AS6 — source specification details
Vehicle class
Mid-size
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
13.3 L/100 km
Highway fuel consumption
9.3 L/100 km
Tailpipe CO₂ emissions
265 g/km
Fusion AWD · AS6 — source specification details
Vehicle class
Mid-size
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
18.0 L/100 km
Highway fuel consumption
12.6 L/100 km
Tailpipe CO₂ emissions
248 g/km
Fusion AWD · AS6 — source specification details
Vehicle class
Mid-size
Engine displacement
3.5 L
Cylinders
6
City fuel consumption
14.3 L/100 km
Highway fuel consumption
9.8 L/100 km
Tailpipe CO₂ emissions
283 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2010 Ford Fusion, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2021029 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2019665 (Brakes). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2019005 (Airbag). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2010 Ford Fusion.
STEERING
1662
POWER TRAIN
894
VEHICLE SPEED CONTROL
793
ENGINE
700
AIR BAGS
591
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-10
25-11
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-09
26-10
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-10
1
2025-11
3
2025-12
2
2026-01
2
2026-02
3
2026-03
2
2026-04
3
2026-05
4
2026-06
2
2026-07
3
2026-09
4
2026-10
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
346
25,000–49,999 mi
779
50,000–99,999 mi
1,657
100,000–149,999 mi
875
150,000+ mi
361
Missing or excluded mileage
1,113
4,018 of 5,131 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged122US complaint allegations
Fire flagged9US complaint allegations
Towed flagged96US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
9 matched manufacturer communications · 10 matched investigations. Communications are not necessarily recalls or technical service bulletins.
AQ10001 · Fleet Vehicle Recall Completion Audit
On November 18, 2010, NHTSA's Recall Management Division (RMD) opened an audit query (AQ10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary recall-related remedies on the vehicles owned and then rented/leased for use on the roadways.RMD queried three (3) major motor vehicle manufacturers (Ford, Chrysler, and General Motors) and requested data regarding completion figures for fifteen (15) discreet safety recalls.Analysis of this data demonstrated that rental car recalls completion was neither complete nor consistent.The rental car companies representing the largest market share in the industry were then queried as to their respective policies for the rental, lease, and sale of vehicles with open recalls.The data and responses from the manufacturers and the rental car companies can be found in the document repository by accessing the ?Associated Documents link above.In December 2015, Congress enacted the Fixing America's Surface Transportation (FAST) Act.One section of the Act prohibits rental car companies from renting, leasing, or selling motor vehicles subject to open safety recalls.With the passage of the FAST Act and its prohibition, there is no continuing need for the agency to investigate rental car recall completions.Accordingly, this investigation is closed.The agency reserves the right to open any future investigations, including audits of individual recalls, or groups of recalls, or rental car companies, to examine more closely safety recalls performance and completion issues in this area.
The Office of Defects Investigation (ODI) received a petition on December 22, 2025, requesting a defect investigation into the hydraulic control unit (HCU) for the Anti-lock Braking System (ABS) on the MY 2010 Ford Fusion Hybrid. The petition alleges that an illuminated ABS MIL is associated with a failure of the ABS HCU, resulting in ABS malfunction, loss of traction and electronic stability control functions, and reduced braking performance, particularly on slippery road surfaces. ODI conducted an analysis of complaints submitted to ODI for the subject vehicle population along with data submitted by Ford. The Petitioner alleged that the condition in the subject vehicles was comparable to the defect addressed by NHTSA recall No. 19V904, which covered certain MY 2006-2010 Ford Fusion, Mercury Milan, and Lincoln MKZ vehicles. The population of this recall consisted of the non-hybrid variants of these models. The recall addressed a defect where the ABS valves in the HCU could remain stuck open due to a chemical reaction with aged DOT 3 brake fluid, potentially causing extended brake pedal travel and increasing the risk of a crash. DOT 3 brake fluid is a conventional, glycol-ether-based hydraulic fluid used to transfer force from the brake pedal to a vehicle's brakes. No visual or audible warning was presented to the driver in this scenario. The MY 2010 Ford Fusion Hybrid is equipped with a different brake apply system in which the traditional hydraulic (friction) brakes are blended with the hybrid regenerative brake system. In this system, the brake master cylinder is electrically activated and provides force feedback through the brake pedal to the driver. Unlike the recalled models, Petitioner’s 2010 Ford Fusion Hybrid would not experience the same defect, as a stuck-open normally closed valve within its ABS HCU does not result in increased brake pedal travel. This condition is further supported by the relative complaint rates in the two populations: ODI found the complaint rate of the recalled MY 2010 Fusion vehicles was six times higher than that of the subject MY 2010 Fusion Hybrid vehicles, which supports a significant difference in the design and performance of the brake system and components. As the Petitioner stated, most of the subject hybrid vehicle VOQs cited an illuminated ABS MIL. The vehicles in 19V904 did not present the driver with an illuminated MIL or associated diagnostic trouble code (DTC). Since the MY 2010 Ford Fusion Hybrid presented with a brake MIL, the failure mode differs from that of the non-hybrid population, which did not trigger an illuminated warning light. Additionally, given the age of the subject vehicles (MY 2010), the low complaint volume is consistent with expected wear and tear rather than an actionable safety defect trend. For the above reasons, ODI is denying this Defect Petition as it has not found an unreasonable risk to highway safety. The Agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
To date, the agency is aware of 84 consumer complaints and 361 warranty claims related to the alleged defect in the subject vehicles.In total, 382 subject vehicles reportedly experienced one or more wheel stud fractures, resulting in 7 alleged wheel separation incidents.Most of the reported wheel stud fractures occurred on subject vehicles originally equipped with 17 inch diameter steel wheels (368 of 382) as did all 7 alleged wheel separation incidents.Of the 7 alleged wheel separation incidents, 5 reportedly involved a wheel becoming detached from the subject vehicle's rear axle.The subject vehicles are designed with a safety margin that requires validation of proper wheel joint function with one missing lug nut and all other lug nuts at the minimum torque specification.If multiple stud fractures occur at a wheel location, analysis of reports indicates that the operator may observe vehicle vibration. If the vibration is ignored and the vehicle continues to be driven the remaining studs may fracture, resulting in a wheel separation.By letter dated December 5, 2011, the manufacturer notified the agency that it will conduct a safety recall (identified by NHTSA Recall No.11V-574 and Ford Recall No. 11S23) on certain 2010 and 2011 model year Ford Fusion and Mercury Milan vehicles to address the potential for wheel separation.The recall vehicles were originally equipped with 17 inch diameter steel wheels and were built from April 1, 2009, through April 30, 2009, and from December 1, 2009, through November 13, 2010.Approximately 128,616 vehicles are potentially affected as well as approximately 2,940 service steel wheels distributed to authorized Ford dealers.Ford has identified two distinct root causes of wheel stud fracture in the recall vehicles.First, certain steel wheel centers may have been stamped improperly such that the mounting pad lacks the necessary concavity, which reduces the diameter of the outermost radial points of contact with the brake rotor.This reduces the Belleville washer effect, which reduces the clamp load of the joint.Second, the wheel mounting face on certain rear brake discs may have been machined improperly due to a damaged dust boot on a gauge that measures rear brake rotor parallelism (flatness), resulting in a wheel mounting face that is convex.One or both conditions may induce bending fatigue in the wheel studs.Ford's analysis of manufacturing process information showed that one or both of these two conditions may have been out of control during parts of one or both production ranges covered by the recall.Owners will be notified by mail and instructed to take their vehicles to an authorized Ford or Lincoln dealer to have the lug nuts replaced on all four wheels with new lug nuts treated with a proprietary low-friction coating that improves clamp load given the same applied torque value, and to have the rear brake discs inspected for wheel mounting surface flatness and replaced, if required.Ford will instruct dealers to notify customers who purchased service steel wheels, where information is available, to return vehicles for lug nut replacement.Accordingly, this investigation is closed.The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10364337, 10373257, 10378953, 10381431, 10389641, 10389940, 10392373, 10395676, 10396577, 10400071, 10402309, 10416653, 10419175, 10419734, 10420116, 10424191, 10432393, 10434188, 10436471, 10438725 and 10440830.
On May 27, 2014, Ford Motor Company submitted recall 14E-028 (Ford recall #14S07) to correct a safety-related problem with certain driver's side Ford optional all-weather floor mats sold for use in model year 2006 through 2011 model year Ford Fusion, Mercury Milan, Lincoln Zephyr, and Lincoln MKZ vehicles built at Hermosillo Assembly Plant (HAP) from November 9, 2007, to October 31 ,2010.NHTSA testing determined that the original accessory all-weather mat with a single retention clip (Figure 1), may interfere with accelerator pedal return to idle with the mat retained by the clip and rotated clockwise.Both the single- and double-clip (Figure 2) all-weather floor mats may interfere with the accelerator pedal return to idle when the mats are not secured by the retention clip(s).Testing showed that this can occur if the mats are moved forward from the clipped position approximately two inches into a position in which the rear edge of the mats will abut the retention clip(s) when installed singly and align with the clip(s) when stacked on another floor mat.The pedal interference incidents reviewed by the Office of Defects Investigation (ODI) include 1 crash and 9 incidents with allegations of brake friction materials smoking and/or requiring repair for heat related damage.The crash incident occurred after the parking brake was applied at speed, resulting in loss-of-control vehicle yaw event caused by lock-up of the rear tires.The spin-out resulted in a side impact collision with an oncoming vehicle in an opposing lane of traffic. For the 29 incidents with sufficient information available to make an assessment; 23 (79%) were controlled by the driver either shifting to neutral, turning the engine off, or both; 4 (14%) were ended by the driver either kicking the pedal free (2) or pulling the mat away from the pedal (2); and 2 (7%) were ended by the pedal freeing itself from the mat with no apparent driver action.None of the drivers who reacted to the incident by shifting to neutral or turning the engine off reported any difficulties with either action.The subject mats were sold by Ford and Lincoln dealers directly to customers as an optional accessory equipment item or, beginning in November 2007, the mats were also available as a factory installed accessory if ordered with a new vehicle.Ford estimates that approximately 82,579 affected driver's side all weather floor mats were sold worldwide; either over the counter through Ford dealerships or as original equipment.Owners that purchased the subject all-weather floor mats as a factory installed accessory with their new vehicle will be notified to return their all weather floor mats to their Ford or Lincoln Dealership in exchange for replacement mats.Owners of all other potentially affected vehicles will be notified that, if they have an affected Ford driver's side all weather floor mat, they should return their mats to the dealership in exchange for replacement mats.The VOQs associated with the closing of this investigation are: 10327597, 10332233, 10334211, 10335336, 10339330, 10348772 (and duplicate 10342572), 10372674, 10379562, 10415911, 10426255, 10434107, 10521053, 10554966.This investigation is hereby closed.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.