Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Powertrain
Issue:
On certain trucks, a software problem could cause the transmission to downshift suddenly to second gear. If this happens, there could be a loss of control.
Note: This recall only affects trucks equipped with a 6-speed transmission.
Safety Risk:
A l…
Read the complete source summary
Issue:
On certain trucks, a software problem could cause the transmission to downshift suddenly to second gear. If this happens, there could be a loss of control.
Note: This recall only affects trucks equipped with a 6-speed transmission.
Safety Risk:
A loss of control could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your truck to a dealership to update the powertrain control module software.
Issue:
On certain trucks, the windshield wiper linkage could corrode and seize. If this happens, the windshield wipers may not work.
Safety Risk:
Windshield wipers that don't work could reduce visibility and increase the risk of a crash.
Corrective Act…
Read the complete source summary
Issue:
On certain trucks, the windshield wiper linkage could corrode and seize. If this happens, the windshield wipers may not work.
Safety Risk:
Windshield wipers that don't work could reduce visibility and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your truck to a dealership to replace the windshield wiper linkage.
Issue:
On certain trucks, brake fluid could leak from the brake master cylinder front wheel circuit into the brake booster. If this happens, the driver may experience increased brake pedal travel and increased pedal effort. This can cause reduced front brake …
Read the complete source summary
Issue:
On certain trucks, brake fluid could leak from the brake master cylinder front wheel circuit into the brake booster. If this happens, the driver may experience increased brake pedal travel and increased pedal effort. This can cause reduced front brake performance. Full braking function remains in the rear wheel circuit.
Note: Depending on the amount of brake fluid loss, the driver may hear a warning chime and see a red brake warning indicator in the instrument cluster.
Safety Risk:
Reduced front brake performance can cause extended stopping distances and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your truck to a Ford or Lincoln dealer to replace the brake master cylinder.
Issue:
On certain trucks with a 3.5-L engine, there could be a problem with the engine block heater cable. The wrong cable may have been installed when your vehicle was repaired under a previous recall. The cable that was installed may not have enough heat pr…
Read the complete source summary
Issue:
On certain trucks with a 3.5-L engine, there could be a problem with the engine block heater cable. The wrong cable may have been installed when your vehicle was repaired under a previous recall. The cable that was installed may not have enough heat protection and could be damaged by high engine temperatures. When plugged in, this could cause a short circuit to occur, resulting in overheated or melted wiring. It could also cause the block heater not to work, and/or it could cause a household circuit breaker to trip. For details of the previous recall, please see Transport Canada recall no. 2019-174 (Ford no. 19S11/19G01).
Safety Risk:
Overheated or melted wiring could create the risk of a fire.
Corrective Actions:
Do not use your block heater until the recall inspection and repairs are completed. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the block heater and cable. Depending on the results of the inspection, the heater element and/or block heater cable will be replaced, as necessary. If the replacement parts are not available, the dealer will disable the engine block heater. Ford will send you another notice when the replacement parts are available, and will ask you to take your vehicle to a dealer to have them installed.
Issue:
On certain trucks, the electric tailgate latch could malfunction. This may cause the tailgate to unlatch on its own. If the tailgate opens while driving, cargo that is not secured could fall out of the truck bed and onto the road.
Safety Risk:
Cargo …
Read the complete source summary
Issue:
On certain trucks, the electric tailgate latch could malfunction. This may cause the tailgate to unlatch on its own. If the tailgate opens while driving, cargo that is not secured could fall out of the truck bed and onto the road.
Safety Risk:
Cargo that falls from the truck bed could create a road hazard for others.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to modify the tailgate/frame wiring harnesses and will install a new tailgate handle release switch.
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: …
Read the complete source summary
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Safety Risk:
Glass that breaks in to large pieces could create a risk of injury.
Corrective Actions:
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Issue:
The connectors on the engine block heater cable may have been damaged when your truck was serviced for recall campaign 2018-718 (Ford #18S45). This could cause a short-circuit, which may result in overheated or melted wiring.
Safety Risk:
Overheated…
Read the complete source summary
Issue:
The connectors on the engine block heater cable may have been damaged when your truck was serviced for recall campaign 2018-718 (Ford #18S45). This could cause a short-circuit, which may result in overheated or melted wiring.
Safety Risk:
Overheated or melted wiring could create the risk of a fire.
Corrective Actions:
Stop use of your engine block heater immediately. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. Ford will send you another notice when replacement parts are available, and will ask you to take your vehicle to a dealer to install them. Do not use your engine block heater until the replacement parts are installed.
Issue:
Water and contaminants may damage and corrode the block heater cable connectors. This could cause a short-circuit, which may result in overheated or melted wiring.
Safety Risk:
Overheated or melted wiring could create the risk of a fire.
Correctiv…
Read the complete source summary
Issue:
Water and contaminants may damage and corrode the block heater cable connectors. This could cause a short-circuit, which may result in overheated or melted wiring.
Safety Risk:
Overheated or melted wiring could create the risk of a fire.
Corrective Actions:
Stop use of your engine block heater immediately. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. Ford will send you another notice when replacement parts are available, and will ask you to take your vehicle to a dealer to install them. Do not use your engine block heater until the replacement parts are installed.
On certain vehicles, the activation of the front seat belt pretensioners in a crash may result in momentary ignition of pretensioner exhaust gases. This could ignite materials in the B-pillar area, leading to a fire causing injury and/or damage to property. Co…
Read the complete source summary
On certain vehicles, the activation of the front seat belt pretensioners in a crash may result in momentary ignition of pretensioner exhaust gases. This could ignite materials in the B-pillar area, leading to a fire causing injury and/or damage to property. Correction: Dealers will inspect the B-pillar area, modify the floor covering and sound insulation, and apply heat-resistant tape.
On certain vehicles, door latch shielding may not be sufficient. As a result, water could enter into the side door latch and freeze, causing the latch mechanism to bind after opening. In addition, latch actuation cables may have been bent or kinked during inst…
Read the complete source summary
On certain vehicles, door latch shielding may not be sufficient. As a result, water could enter into the side door latch and freeze, causing the latch mechanism to bind after opening. In addition, latch actuation cables may have been bent or kinked during installation, and could result in latch binding. A frozen door latch, or bent or kinked actuation cable may result in a door that will not open or will not close. If a latch does not fully engage the door striker, there is a potential for a door to open while the vehicle is in motion, which could increase the risk of injury. Correction: Dealers will install water shields over the door latches and the door latch actuation cables will be inspected and repaired if needed.
Certain vehicles equipped with rear inflatable seat belts may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 210 – Seat Belt Assembly Anchorages. The left rear inflatable seat belt buckle may have been assembled with a rivet that was improperl…
Read the complete source summary
Certain vehicles equipped with rear inflatable seat belts may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 210 – Seat Belt Assembly Anchorages. The left rear inflatable seat belt buckle may have been assembled with a rivet that was improperly staked. As a result, the left rear seat belt assembly could separate from its mounting bracket during a crash, which could increase the risk of injury and would fail to meet the anchorage strength requirements of the standard. Correction: Dealers will inspect the left rear seat belt buckle rivet, and replace the seat belt buckle assembly if necessary.
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards (CMVSS) 210 - Seat Belt Anchorages and (CMVSS) 209 – Seat Belt Assemblies. Front seat belt anchorages may have pretensioner cables that were not properly crimped an…
Read the complete source summary
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards (CMVSS) 210 - Seat Belt Anchorages and (CMVSS) 209 – Seat Belt Assemblies. Front seat belt anchorages may have pretensioner cables that were not properly crimped and may fail to conform to CMVSS 209 assembly performance standards, and the strength requirements of the CMVSS 210 standard. These issues could result in the belts not adequately restraining occupants in a crash, increasing the risk of injury. Correction: Dealers will replace front driver and/or passenger seat belt retractors and pretensioners.
On certain vehicles equipped with Adaptive Cruise Control (ACC), when the ACC is engaged, the driver may experience unexpected braking while passing a large, highly reflective vehicle. An unexpected ACC braking event could increase the risk of a crash involvi…
Read the complete source summary
On certain vehicles equipped with Adaptive Cruise Control (ACC), when the ACC is engaged, the driver may experience unexpected braking while passing a large, highly reflective vehicle. An unexpected ACC braking event could increase the risk of a crash involving a trailing vehicle. During this unexpected braking event, the Collision Warning System red warning light may also flash and an audible tone may be heard. Correction: Dealers will reprogram the cruise control module with updated ACC radar software. Note: The brake lights would illuminate while the brakes are applied by the ACC system, and the driver could still override the ACC system at any time using the accelerator pedal, brake pedal or by cancelling ACC through the steering wheel switches.
On certain vehicles, the intermediate shaft may have been improperly riveted during manufacturing. An improperly riveted intermediate shaft could separate from the intermediate shaft flex coupling, which could result in a loss of steering control without warn…
Read the complete source summary
On certain vehicles, the intermediate shaft may have been improperly riveted during manufacturing. An improperly riveted intermediate shaft could separate from the intermediate shaft flex coupling, which could result in a loss of steering control without warning, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the intermediate shaft, and replace if required.
Certain vehicles may have loose or missing underbody heat shields. Missing underbody heat shields on vehicles could lead to degradation or possibly melting of the fuel or vapor lines, increasing the risk of a fire, which could result in injury and/or damage t…
Read the complete source summary
Certain vehicles may have loose or missing underbody heat shields. Missing underbody heat shields on vehicles could lead to degradation or possibly melting of the fuel or vapor lines, increasing the risk of a fire, which could result in injury and/or damage to property. Correction: Dealers will inspect for missing underbody heat shields and fasteners, and install missing components as required.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
F-150 AS6
X 2.7 L engine
10.8 L/100 km
Data unavailable
F-150 AS6
X 3.5 L engine
12.0 L/100 km
Data unavailable
F-150 FFV A6
X 3.5 L engine
11.5 L/100 km
Data unavailable
F-150 FFV A6
E 3.5 L engine
15.7 L/100 km
Data unavailable
F-150 FFV AS6
X 5.0 L engine
13.3 L/100 km
Data unavailable
F-150 FFV AS6
E 5.0 L engine
17.9 L/100 km
Data unavailable
F-150 4X4 AS6
X 2.7 L engine
12.0 L/100 km
Data unavailable
F-150 4X4 AS6
X 3.5 L engine
12.5 L/100 km
Data unavailable
F-150 FFV 4X4 A6
X 3.5 L engine
12.4 L/100 km
Data unavailable
F-150 FFV 4X4 A6
E 3.5 L engine
16.8 L/100 km
Data unavailable
F-150 FFV 4X4 AS6
X 5.0 L engine
13.9 L/100 km
Data unavailable
F-150 FFV 4X4 AS6
E 5.0 L engine
18.7 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2015 Ford F-150, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2026189 (Powertrain). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2024779 (Visual System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2020252 (Brakes). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2015 Ford F-150.
POWER TRAIN
443
SERVICE BRAKES
299
ENGINE
266
UNKNOWN OR OTHER
207
ELECTRICAL SYSTEM
176
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-12
4
2026-01
6
2026-02
50
2026-03
16
2026-04
17
2026-05
27
2026-06
20
2026-07
29
2026-08
37
2026-09
27
2026-10
27
2026-11
9
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
281
25,000–49,999 mi
257
50,000–99,999 mi
384
100,000–149,999 mi
132
150,000+ mi
62
Missing or excluded mileage
640
1,116 of 1,756 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged50US complaint allegations
Fire flagged13US complaint allegations
Towed flagged75US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
83 matched manufacturer communications · 5 matched investigations. Communications are not necessarily recalls or technical service bulletins.
AQ17001 · Champion Ford Edinboro / Steering Shaft
NHTSA opened AQ17-001 to determine whether Champion Ford Edinboro, Inc. (Champion Ford), of Edinboro, Pennsylvania, complied with the requirements of the National Traffic and Motor Vehicle Safety Act, 49 U.S.C. Chapter 301 (Safety Act) and its implementing regulations. The Safety Act requires, among other things, that a manufacturer notify its dealers of defects related to motor vehicle safety and non-compliances with Federal Motor Vehicle Safety Standards and, in turn, that a dealer not sell a new vehicle subject to a recall unless the recall remedy has been performed (49 U.S.C. ?30120(i)).NHTSA issued an information request (IR) letter to Champion Ford on January 4, 2017.Champion Ford responded to this request on January 19, 2017.Also on January 4, 2017, an IR letter was issued to Ford Motor Company (Ford) and a response was received from Ford on January 25, 2017.Finally, another IR was issued to Champion Ford on May 31, 2017, and Champion Ford's response letter was submitted to NHTSA on June 14, 2017.NHTSA's investigation indicated that Champion Ford did sell and deliver recalled vehicles that did not have the recall remedy completed at the time the vehicles were delivered to the customers.NHTSA therefore concluded that Champion Ford was liable for civil penalties for violations of the Safety Act, pursuant to 49 U.S.C. ?30165.Under a Settlement Agreement dated April 16, 2018, Champion Ford agreed to pay compromised civil penalties in the amount of $20,000.Champion Ford also represented in writing that it repaired all twenty-three (23) recalled vehicles identified in AQ17-001 and will strictly adhere to Ford's procedures requiring dealers to check for outstanding safety recalls prior to customer delivery.NHTSA's Recall Management Division has verified that all twenty-three (23) vehicles have been remedied of the safety recalls identified in AQ17-001.This Audit Query is closed.
On March 21, 2025, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE25002) to investigate instances of unexpected transmission downshifting without driver input in model year (MY) 2015-2017 Ford F-150 vehicles (subject vehicles) manufactured by Ford Motor Company (Ford). The complaints allege that, without warning or driver input, the subject vehicles experienced a sudden and rapid deceleration often accompanied by temporary rear wheel lockup, seizure, or skidding, resulting in a loss of vehicle control that increases the risk of crash and injury to all motorists, including those not within the subject vehicles. The MY 2015 and MY 2016 F-150 vehicles were equipped with the “6R80” transmission, while the MY 2017 vehicles were equipped with either the “6R80” transmission or the “10R80” transmission. This investigation was limited to MY 2015-2017 Ford F-150 with the “6R80” transmission. ODI identified 329 Vehicle Owners Questionnaires (VOQs) related to this investigation and sixty percent of these consumers were interviewed to confirm the details of their allegations. Consumers reported that their vehicles’ transmission suddenly downshifted to a lower gear, often to 1st or 2nd gear, without driver input or advance warning. Consumers described the downshift events to be regular and repeated occurrences, with some consumers stating that they no longer drive the vehicle due to safety concerns. Forty-three percent of consumers reported experiencing at least one wheel lockup event, during which the rear tires locked, screeched, or skidded during the transmission downshift. ODI also found that 114 of the 329 consumers reported having their vehicle’s molded lead frame or valve body assembly (which comes with a molded lead frame) replaced, 80 of which were confirmed through consumer submitted repair invoices. In its response to ODI’s Information Request, Ford provided an assessment of potential root cause of failure for the subject vehicles and how this failure is different from the failure associated with MY 2011-2014 Ford F-150 vehicles that was addressed by four safety recalls (16V-248, 19V-075, 19V-433, and 24V-444). Ford has identified that the defect in the recalled vehicle population involved lead frame supplier production issues resulting in signal loss from the Output Shaft Speed (OSS) sensor. Ford has identified that the alleged defect in the subject vehicle population involved degradation of electrical connections within the lead frame due to thermal cycling and vibration over extended time in service resulting in signal loss from the Transmission Range Sensor (TRS). Signal loss from the TRS can result in an unintended shift to neutral, unintended upshift, or unintended downshift which are regulated by a gear “shift map” based on the vehicle’s speed at the time of signal loss. According to Ford’s “shift map”, at speeds between 35-64 mph, the maximum allowable downshift would be to 2nd gear (i.e. a 6th to 2nd gear downshift event) which Ford has designated to represent the worst-case scenario for subject vehicles. Ford has also acknowledged that the worst-case scenario may also involve temporary wheel lockup. However, Ford has stated that the failure mechanism in the MY 2011-2014 F-150 vehicles—previously addressed through recalls—primarily involved OSS sensor signal loss that could result in 6th to 1st gear downshift events. This OSS-related failure mode is distinct from the TRS-related signal loss identified in the subject vehicle population. ODI has identified an additional potential safety defect associated with the alleged defect in the subject vehicles. Preliminary testing performed by NHTSA’s Vehicle Research Test Center (VRTC) showed that when the TRS experiences an intermittent signal loss, one possible outcome is a change in vehicle direction. Specifically, if a vehicle is operating in reverse up an incline when the TRS signal loss occurs, then the vehicle may shift into neutral causing the vehicle to change directions and roll forward. ODI is opening this Engineering Analysis (EA) to, among other things, perform component-level testing and vehicle testing, as well as review additional technical information to better understand the alleged defect that has been identified. To review the reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
On June 18, 2018, the Office of Defects Investigations (ODI) opened a Preliminary Evaluation (PE18-008) to investigate complaints alleging post-crash fires at the B pillar in the area of the seat belt pretensioners on MY 2014-2018 Ford F-150 Regular Cab, and Super Crew Cab Vehicles. On August 24, 2018, Ford Motor Company recalled (FSA 18S27 - NHTSA #18V568) the affected population. Ford's investigation found that some front seat belt pretensioners may generate sparks during deployment in excess of Ford's specification. Sparks in the pretensioner exhaust gases inside the lower portion of the B-pillar may subsequently ignite combustible components contained in the B-pillar, such as insulation or carpet, and may cause a subsequent vehicle fire. ODI also requested relevant information from other manufacturers to assess the potential scope of post-crash pretensioner fires. Ford will notify owners and require dealers to remove B-pillar insulation material and wiring harness tape, and install heat resistant tape, free of charge. The recall notification began September 28, 2018.Owners may contact Ford customer service at 1-866-436-7332.The VOQs associated with the closing of this investigation are: 11143035, 11130056, 11129828, 11128761, 11127993, 11127880, 11124717, 11123419, 11119651, 11119626, 11114065, 11113160, 11111822, 11097937, 11078447, 11014688
On March 21, 2025, NHTSA’s Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE25002) to investigate instances of unexpected transmission downshifting without driver input in model year (MY) 2015-2017 Ford F-150 vehicles (subject vehicles) manufactured by Ford Motor Company (Ford). The complaints allege that, without warning or driver input, the subject vehicles experienced a sudden and rapid deceleration often accompanied by temporary rear wheel lockup, seizure, or skidding, resulting in a loss of vehicle control that increases the risk of crash and injury to all motorists, including those not within the subject vehicles. The MY 2015 and MY 2016 F-150 vehicles were equipped with the “6R80” transmission, while the MY 2017 vehicles were equipped with either the “6R80” transmission or the “10R80” transmission. This investigation was limited to MY 2015-2017 Ford F-150 with the “6R80” transmission. ODI identified 329 Vehicle Owners Questionnaires (VOQs) related to this investigation and sixty percent of these consumers were interviewed to confirm the details of their allegations. Consumers reported that their vehicles’ transmission suddenly downshifted to a lower gear, often to 1st or 2nd gear, without driver input or advance warning. Consumers described the downshift events to be regular and repeated occurrences, with some consumers stating that they no longer drive the vehicle due to safety concerns. Forty-three percent of consumers reported experiencing at least one wheel lockup event, during which the rear tires locked, screeched, or skidded during the transmission downshift. ODI also found that 114 of the 329 consumers reported having their vehicle’s molded lead frame or valve body assembly (which comes with a molded lead frame) replaced, 80 of which were confirmed through consumer submitted repair invoices. In its response to ODI’s Information Request, Ford provided an assessment of potential root cause of failure for the subject vehicles and how this failure is different from the failure associated with MY 2011-2014 Ford F-150 vehicles that was addressed by four safety recalls (16V-248, 19V-075, 19V-433, and 24V-444). Ford has identified that the defect in the recalled vehicle population involved lead frame supplier production issues resulting in signal loss from the Output Shaft Speed (OSS) sensor. Ford has identified that the alleged defect in the subject vehicle population involved degradation of electrical connections within the lead frame due to thermal cycling and vibration over extended time in service resulting in signal loss from the Transmission Range Sensor (TRS). Signal loss from the TRS can result in an unintended shift to neutral, unintended upshift, or unintended downshift which are regulated by a gear “shift map” based on the vehicle’s speed at the time of signal loss. According to Ford’s “shift map”, at speeds between 35-64 mph, the maximum allowable downshift would be to 2nd gear (i.e. a 6th to 2nd gear downshift event) which Ford has designated to represent the worst-case scenario for subject vehicles. Ford has also acknowledged that the worst-case scenario may also involve temporary wheel lockup. However, Ford has stated that the failure mechanism in the MY 2011-2014 F-150 vehicles—previously addressed through recalls—primarily involved OSS sensor signal loss that could result in 6th to 1st gear downshift events. This OSS-related failure mode is distinct from the TRS-related signal loss identified in the subject vehicle population. ODI has identified an additional potential safety defect associated with the alleged defect in the subject vehicles. Preliminary testing performed by NHTSA’s Vehicle Research Test Center (VRTC) showed that when the TRS experiences an intermittent signal loss, one possible outcome is a change in vehicle direction. Specifically, if a vehicle is operating in reverse up an incline when the TRS signal loss occurs, then the vehicle may shift into neutral causing the vehicle to change directions and roll forward. Based on NHTSA’s analysis of consumer data, information provided by Ford, and preliminary testing conducted by NHTSA’s VRTC, this Preliminary Evaluation is being upgraded to an Engineering Analysis (EA26001). During this Engineering Analysis, the agency plans to, among other things, perform component-level testing and vehicle testing, as well as review additional technical information to better understand the alleged defect that has been identified from this Preliminary Evaluation. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.