Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Airbag
On certain vehicles, the airbag clockspring jumper wire may be oriented in a way that allows contact with the lower horn mounting plate. In this position the wire insulation may chafe, exposing bare copper, and creating the potential for a short circuit. Sho…
Read the complete source summary
On certain vehicles, the airbag clockspring jumper wire may be oriented in a way that allows contact with the lower horn mounting plate. In this position the wire insulation may chafe, exposing bare copper, and creating the potential for a short circuit. Should this occur, the airbag warning lamp will illuminate, indicating service is required. In some instances, the driver's airbag could inadvertently deploy. Inadvertent deployment in a non-collision (non-impact) situation may create expensive vehicle repair, including replacement of the driver's airbag module. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will install an updated clockspring jumper wire which incorporates a protective mesh cover.
On certain vehicles equipped with a 5.4L 3-valve engine, the brake booster vacuum supply hose attached to the intake manifold fitting may swell over time and lose retention force. This could allow the hose to become detached from the fitting during an intake …
Read the complete source summary
On certain vehicles equipped with a 5.4L 3-valve engine, the brake booster vacuum supply hose attached to the intake manifold fitting may swell over time and lose retention force. This could allow the hose to become detached from the fitting during an intake manifold backfire. Should this occur, the driver would only have a few brake applications with power booster assist before the vacuum reserve is depleted. When this happens, foundation brake function would be retained, but will require increased pedal effort. Extended stopping distances may result in a vehicle crash, causing property damage, and/or personal injury or death.. Correction: Dealers will replace the vacuum hose.
Certain vehicles were built with a software error in the instrument cluster. This error could prevent the Antilock Brake System (ABS) warning light from illuminating if the ABS module ever became inoperative. Correction: Dealers will recalibrate the instrume…
Read the complete source summary
Certain vehicles were built with a software error in the instrument cluster. This error could prevent the Antilock Brake System (ABS) warning light from illuminating if the ABS module ever became inoperative. Correction: Dealers will recalibrate the instrument cluster.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
F-150 A4
X 4.2 L engine
15.8 L/100 km
Data unavailable
F-150 M5
X 4.2 L engine
15.4 L/100 km
Data unavailable
F-150 A4
X 4.6 L engine
15.8 L/100 km
Data unavailable
F-150 A4
X 5.4 L engine
15.7 L/100 km
Data unavailable
F-150 4X4 A4
X 4.6 L engine
17.1 L/100 km
Data unavailable
F-150 4X4 A4
X 5.4 L engine
16.6 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
F-150 · A4 — source specification details
Vehicle class
Pickup truck: Standard
Engine displacement
4.2 L
Cylinders
6
City fuel consumption
17.9 L/100 km
Highway fuel consumption
13.4 L/100 km
Tailpipe CO₂ emissions
363 g/km
F-150 · M5 — source specification details
Vehicle class
Pickup truck: Standard
Engine displacement
4.2 L
Cylinders
6
City fuel consumption
17.7 L/100 km
Highway fuel consumption
12.7 L/100 km
Tailpipe CO₂ emissions
354 g/km
F-150 · A4 — source specification details
Vehicle class
Pickup truck: Standard
Engine displacement
4.6 L
Cylinders
8
City fuel consumption
17.8 L/100 km
Highway fuel consumption
13.4 L/100 km
Tailpipe CO₂ emissions
363 g/km
F-150 · A4 — source specification details
Vehicle class
Pickup truck: Standard
Engine displacement
5.4 L
Cylinders
8
City fuel consumption
17.3 L/100 km
Highway fuel consumption
13.6 L/100 km
Tailpipe CO₂ emissions
361 g/km
F-150 4X4 · A4 — source specification details
Vehicle class
Pickup truck: Standard
Engine displacement
4.6 L
Cylinders
8
City fuel consumption
19.1 L/100 km
Highway fuel consumption
14.5 L/100 km
Tailpipe CO₂ emissions
393 g/km
F-150 4X4 · A4 — source specification details
Vehicle class
Pickup truck: Standard
Engine displacement
5.4 L
Cylinders
8
City fuel consumption
18.5 L/100 km
Highway fuel consumption
14.2 L/100 km
Tailpipe CO₂ emissions
382 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2005 Ford F-150, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2011073 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2008154 (Brakes). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2006032 (Brakes). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2005 Ford F-150.
VISIBILITY
260
ENGINE
117
POWER TRAIN
112
ENGINE AND ENGINE COOLING
111
AIR BAGS
101
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
24-06
24-10
24-11
25-01
25-04
25-07
25-08
25-09
25-10
25-11
25-12
26-05
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2024-06
1
2024-10
1
2024-11
1
2025-01
1
2025-04
1
2025-07
3
2025-08
1
2025-09
1
2025-10
1
2025-11
1
2025-12
1
2026-05
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
153
25,000–49,999 mi
213
50,000–99,999 mi
400
100,000–149,999 mi
137
150,000+ mi
70
Missing or excluded mileage
139
973 of 1,112 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged50US complaint allegations
Fire flagged29US complaint allegations
Towed flagged4US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
2 matched manufacturer communications · 3 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA10001 · Inadvertent airbag deployment
ODI opened this investigation based on reports of inadvertent airbag deployment.Data provided by Ford indicated that the airbag clockspring jumper wire, which is situated inside the steering wheel assembly, was installed in a manner that would allow it to rub (abrade) against a sharp metal edge on the nearby horn plate.Because the horn plate is electrically grounded the abrasion of an airbag wire on the sharp edge could cause a short circuit condition.As a result the airbag light may illuminate and/or the airbag may inadvertently deploy.Inadvertent deployments are most likely to occur during the airbag system's self-diagnostic test that initiates when the ignition switch is turned on.Ford modified the vehicle design in late January 2006 adding a protective tape over the sharp metal edge of the horn plate.Ford made additional design changes on MY 2007 vehicles to the horn plate, the clockspring jumper, and the connector layouts to further address this issue.ODI identified 318 deployment incidents with 121 alleged injury reports from subject vehicles.All but one of the incident and injury reports occurred in vehicles built before the January 2006 modification.In addition, there was one incident and alleged injury reported in the MY 2006 Mark LT vehicles that share the same design. In letters dated February 21 and April 11, 2011, Ford announced a recall of all of the approximately 1.3 million MY 2004-2006 F-150 vehicles built prior to January 24, 2006, the date the initial vehicle modification was made.In addition, approximately 14,000 MY 2006 Mark LT vehicles built prior to January 24, 2006 will also be recalled.Vehicles built after that date, which contain the modification, are not within the recall scope.Accordingly the investigation is closed.
BY LETTER DATED MAY 5, 2008, FORD MOTOR COMPANY (FORD) NOTIFIED THE AGENCY THAT IT WILL CONDUCT A SAFETY RECALL (NHTSA RECALL NUMBER 08V-208) TO ADDRESS A MANUFACTURING DEFECT IN APPROXIMATELY 605,684 MODEL YEAR (MY) 2005 AND 2006 FORD F-150 AND LINCOLN MARK LT VEHICLES ORIGINALLY EQUIPPED WITH THE 5.4L DISPLACEMENT, 3-VALVE PER CYLINDER, V-8 ENGINE.THE RECALLED VEHICLES WERE BUILT FROM JULY 18, 2004 THROUGH MAY 31, 2006 AT THE DEARBORN TRUCK PLANT; FROM MAY 4, 2004 THROUGH MAY 31, 2006 AT THE KANSAS CITY ASSEMBLY PLANT; AND FROM APRIL 19, 2004 THROUGH MAY 31, 2006 AT THE NORFOLK TRUCK PLANT.THE VEHICLES WERE MANUFACTURED WITH THE SAME DEFECTIVE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY UNIQUE TO THE 5.4L V-8 ENGINE.FORD F-150 VEHICLES EQUIPPED WITH OPTIONALLY AVAILABLE 4.2L V6 AND 4.6L V-8 ENGINES ARE NOT INCLUDED IN THIS RECALL ACTION BECAUSE THEY UTILIZE A DIFFERENT, ONE-PIECE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY THAT DOES NOT EXHIBIT AN APPARENT DEFECT TREND. THE RECALLED VEHICLES UTILIZE A TWO-PIECE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY COMPRISED OF A STANDPIPE ASSEMBLY AND VACUUM HOSE.THE STANDPIPE ASSEMBLY ATTACHES TO A FITTING ON THE ENGINE AIR INTAKE MANIFOLD UTILIZING A FLEXIBLE RUBBER HOSE AND PLASTIC ELBOW.THE VACUUM HOSE ATTACHES TO THE OPPOSITE END OF THE STANDPIPE ASSEMBLY AND CONNECTS TO A CHECK VALVE FITTING AT THE BRAKE BOOSTER ASSEMBLY.ACCORDING TO FORD, THE PORTION OF THE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY ATTACHED TO THE INTAKE MANIFOLD MAY SWELL OVER TIME AND LOSE RETENTION FORCE, WHICH MAY ALLOW THE HOSE TO BECOME DETACHED FROM THE INTAKE MANIFOLD.SHOULD THE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY BE DISRUPTED, APPLICATION OF THE BRAKE PEDAL MAY DEPLETE THE VACUUM RESERVE AND CONSEQUENTLY RESULT IN LOSS OF BRAKE POWER-ASSIST. TO CORRECT THE SAFETY DEFECT, FORD WILL INSTALL AN IMPROVED DESIGN BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY THAT UTILIZES A HOSE CLAMP AT THE INTAKE MANIFOLD ATTACHMENT. THIS REMEDY WILL BE PROVIDED FREE OF CHARGE FOR ALL RECALLED VEHICLES.LATER PRODUCTION FORD F-150 AND LINCOLN MARK LT VEHICLES BUILT AFTER MAY 2006 WERE MANUFACTURED WITH A HOSE CLAMP AT THE BRAKE BOOSTER VACUUM SUPPLY HOSE/INTAKE MANIFOLD ATTACHMENT AND ARE NOT AFFECTED. TO DATE, THE OFFICE OF DEFECTS INVESTIGATION (ODI) IS AWARE OF 324 NON-DUPLICATIVE COMPLAINTS AND 14 NON-INJURY CRASHES RELATED TO THE ALLEGED DEFECT IN THE SUBJECT VEHICLES.IN ADDITION, ODI IS AWARE OF 4,465 SUBJECT VEHICLES THAT EXPERIENCED ONE OR MORE WARRANTY CLAIMS TO REPAIR OR REPLACE THE SUBJECT BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY. THE ACTION TAKEN BY FORD IS SUFFICIENT TO RESOLVE THE ISSUES RAISED BY THIS INVESTIGATION.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.
FORD REPORTS THAT THE INADVERTENT AIRBAG DEPLOYMENTS ARE MOST LIKELY CAUSED BY THE AIRBAG HORN MOUNTING PLATE'S SHARP METAL EDGE THAT EVENTUALLY CAN CHAFE/CUT THE AIRBAG CLOCKSPRING JUMPER WIRE LEADING TO A SHORT-TO-GROUND CONDITION.ONE HUNDRED EIGHTY TWO (182) OF THE 230 REPORTS WERE FOR AIRBAG DEPLOYMENTS RESULTING IN 56 INJURIES WITH REMAINING 48 REPORTS FOR AN AIRBAG LIGHT ILLUMINATION CONDITION.INJURIES INCLUDE ABRASION, CONTUSION AND CUTS TO THE ARM/HAND/FACE AND/OR UPPER BODY REGIONS.ONE OWNER REPORTED A BROKEN TOOTH AND TWO OWNERS REPORTED BEING KNOCKED UNCONSCIOUS AS A RESULT OF THE AIRBAG DEPLOYMENT.IN ADDITION, MY2004 AND MY2006 F-150 VEHICLES ALSO CONTAIN THE SAME DESIGN THAT RESULTED IN AN ADDITIONAL 89 REPORTS WITH 37 AIRBAG DEPLOYMENTS AND NINE INJURIES. FORD MADE AN INTERIM DESIGN CHANGE TO THE HORN MOUNTING PLATE IN JANUARY 2006 AND THEN MAJOR CHANGES TO THE HORN MOUNTING PLATE, AIRBAG MODULE AND CLOCKSPRING JUMPER WIRE DESIGNS IN JUNE 2006 FOR THE MY2007 VEHICLES.THIS PRELIMINARY EVALUATION IS UPGRADED TO AN ENGINEERING ANALYSIS (EA10-001) TO INCLUDE MY2004-2006 F-150 VEHICLES AND TO FURTHER EVALUATE THE CONDITION.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.