Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Seats And Restraints
Issue:
On certain vehicles the recall repairs completed by a Ford dealer during recall 25S67 (Transport Canada recall no. 2025-328) may not be effective. As a result, a second repair is required.
On certain vehicles, the trim for the seat fold switch on the s…
Read the complete source summary
Issue:
On certain vehicles the recall repairs completed by a Ford dealer during recall 25S67 (Transport Canada recall no. 2025-328) may not be effective. As a result, a second repair is required.
On certain vehicles, the trim for the seat fold switch on the second-row outboard seats could become stuck. If this happens, the seat(s) could fold and/or move unexpectedly.
Note: This recall replaces Transport Canada recall no. 2025-328. Vehicles that were repaired under that recall also require this repair.
Safety Risk:
A seat that folds and/or moves could increase the risk of injury in a crash.
Corrective Action:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the seat fold switch trim and housing for one with an improved design.
Issue:
On certain vehicles, a problem in the transmission could cause the parking pawl to become damaged. As a result, when the transmission is shifted to Park, the vehicle could move if the parking brake is not applied.
Safety Risk:
A parked vehicle that r…
Read the complete source summary
Issue:
On certain vehicles, a problem in the transmission could cause the parking pawl to become damaged. As a result, when the transmission is shifted to Park, the vehicle could move if the parking brake is not applied.
Safety Risk:
A parked vehicle that rolls away could create the risk of an injury or a crash.
Corrective Actions:
To reduce the safety risk, Ford recommends that you should always use the parking brake when you park until the recall repairs are completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software. The dealer will also inspect and, if necessary, replace any damaged transmission components.
Issue:
On certain vehicles, the second-row outboard seat belt anchor bolt(s) may be loose or missing. As a result, the seat belt(s) could detach in a crash.
Safety Risk:
A seat belt that detaches could increase the risk of injury in a crash.
Corrective Ac…
Read the complete source summary
Issue:
On certain vehicles, the second-row outboard seat belt anchor bolt(s) may be loose or missing. As a result, the seat belt(s) could detach in a crash.
Safety Risk:
A seat belt that detaches could increase the risk of injury in a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, install, tighten or replace seat belt anchor bolt(s).
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to display properly when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
Safety Risk…
Read the complete source summary
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to display properly when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
Safety Risk:
A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail. The corrective actions for this recall are under development.
Issue:
On certain vehicles, the windshield wiper motor may not have been manufactured properly. As a result, the motor could fail and cause the windshield wipers not to work.
Safety Risk:
Windshield wipers that don't work could reduce visibility and increa…
Read the complete source summary
Issue:
On certain vehicles, the windshield wiper motor may not have been manufactured properly. As a result, the motor could fail and cause the windshield wipers not to work.
Safety Risk:
Windshield wipers that don't work could reduce visibility and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the windshield wiper motor.
Issue:
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall…
Read the complete source summary
Issue:
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair.
Safety Risk:
A short circuit can create the risk of a fire.
Corrective Actions:
To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.
This recall was replaced by Transport Canada recall no. 2026-005.
Issue:
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
Safety Risk:
A short circuit can create …
Read the complete source summary
This recall was replaced by Transport Canada recall no. 2026-005.
Issue:
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
Safety Risk:
A short circuit can create the risk of a fire.
Corrective Actions:
To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
Safety Risk:
A rear…
Read the complete source summary
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.
Issue:
On certain vehicles, the trim for the seat fold switch on the second-row seats may not have been installed properly. As a result, the switch could become stuck. If this happens, the seat(s) could fold and/or move unexpectedly.
Safety Risk:
A seat th…
Read the complete source summary
Issue:
On certain vehicles, the trim for the seat fold switch on the second-row seats may not have been installed properly. As a result, the switch could become stuck. If this happens, the seat(s) could fold and/or move unexpectedly.
Safety Risk:
A seat that folds and/or moves could increase the risk of injury in a crash.
Corrective Action:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the seat fold switch trim.
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recalls 22S27 (Transport Canada recall no. 2022-198) and/or 23S16 (Transport Canada recall no. 2023-172) may not have been done correctly. As a result, another repair is required…
Read the complete source summary
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recalls 22S27 (Transport Canada recall no. 2022-198) and/or 23S16 (Transport Canada recall no. 2023-172) may not have been done correctly. As a result, another repair is required.
On certain vehicles, a mounting bolt for the rear axle housing could break. If this happens, the axle housing can move and cause clunking or banging noises and vibrations from the rear of the vehicle. It could also cause the driveshaft and axle shafts to disconnect. This would result in a loss of power to the rear wheels and the vehicle could move when the transmission is in Park, if the parking brake is not used.
Note: This recall only affects certain vehicles equipped with a 3.0 L or 3.3 L engine.
Safety Risk:
A parked vehicle that rolls away could create the risk of an injury or a crash. A loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the engine control module (PCM) software to set the parking brake when the transmission is in the Park position.
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S23 (Transport Canada recall no. 2023-288) may not have been done correctly. As a result, a second repair is required.
On certain vehicles equipped with a 360-degree c…
Read the complete source summary
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S23 (Transport Canada recall no. 2023-288) may not have been done correctly. As a result, a second repair is required.
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.
Issue:
On certain vehicles, the bolts securing the seat belt buckles may not have been properly tightened. Additionally, the second-row center seat belt anchor bolt and/or retractor bolt may not have been properly tightened. As a result, the seat belts could …
Read the complete source summary
Issue:
On certain vehicles, the bolts securing the seat belt buckles may not have been properly tightened. Additionally, the second-row center seat belt anchor bolt and/or retractor bolt may not have been properly tightened. As a result, the seat belts could loosen or detach in a crash.
Safety Risk:
A seat belt that detaches in a crash could create an increased risk of injury.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect the seat belt buckle bolts and the second-row center seat belt and retractor bolts. If any bolts are loose, the dealer will replace the affected part(s).
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S27 (Transport Canada recall number 2022-198) may not address all safety risks. As a result, a second repair is required.
On certain vehicles, a mounting bolt for the …
Read the complete source summary
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S27 (Transport Canada recall number 2022-198) may not address all safety risks. As a result, a second repair is required.
On certain vehicles, a mounting bolt for the rear axle housing could break. If this happens, the axle housing could move and cause clunking or banging noises and vibrations from the rear of the vehicle. It could also cause the driveshaft and axle shafts to disconnect. This could result in a loss of power to the rear wheels. Also, if the previous recall was not completed, the vehicle could move when the transmission is in Park, if the parking brake is not used.
Safety Risk:
A parked vehicle that moves suddenly could create the risk of an injury or a crash. A loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the subframe bushing and rear axle bolt. The dealer will also inspect the rear axle cover, and replace it as necessary.
Issue:
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing.
Note: T…
Read the complete source summary
Issue:
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing.
Note: This recall replaces recall 23S02 (Transport Canada Recall No. 2023-018). Vehicles that were repaired under that recall also require this second repair.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.
Issue:
On certain vehicles, the software update that was installed by a Ford dealer during recall 22S27 (Transport Canada recall number 2022-198) prior to July 2022 may not be effective. As a result, a second repair is required.
On certain vehicles, a mount…
Read the complete source summary
Issue:
On certain vehicles, the software update that was installed by a Ford dealer during recall 22S27 (Transport Canada recall number 2022-198) prior to July 2022 may not be effective. As a result, a second repair is required.
On certain vehicles, a mounting bolt for the rear axle housing could break. If this happens, the axle housing can move and cause clunking or banging noises and vibrations from the rear of the vehicle. It could also cause the driveshaft and axle shafts to disconnect. This would result in a loss of power to the rear wheels and the vehicle could move when the transmission is in Park, if the parking brake is not used.
Note: This recall only affects certain vehicles equipped with a 3.0 L or 3.3 L engine.
Safety Risk:
A parked vehicle that rolls away could create the risk of an injury or a crash. A loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealership to update the engine control module (PCM) software to set the parking brake when the transmission is in the Park position.
Issue:
On certain vehicles, the powertrain control module (PCM) could reset while driving and cause damage to the transmission park system. If this happens, you may not be able to shift the transmission into Park. If you try to exit the vehicle while the tran…
Read the complete source summary
Issue:
On certain vehicles, the powertrain control module (PCM) could reset while driving and cause damage to the transmission park system. If this happens, you may not be able to shift the transmission into Park. If you try to exit the vehicle while the transmission is not in Park, and the parking brake is not applied, the vehicle could move unintentionally.
Note: This recall only affects vehicles equipped with a 2.3 L engine.
Safety Risk:
Unexpected movement of the vehicle could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealership to inspect the transmission park system for damage, and repair it as necessary.
This recall was replaced by Transport Canada Recall No. 2023-288.
Issue:
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require t…
Read the complete source summary
This recall was replaced by Transport Canada Recall No. 2023-288.
Issue:
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.
Safety Risk:
A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the image processing module (IPMB) software.
Issue:
On certain vehicles, a mounting bolt for the rear axle housing could break. If this happens, the axle housing can move and cause clunking or banging noises and vibrations from the rear of the vehicle. It could also cause the driveshaft and axle shafts …
Read the complete source summary
Issue:
On certain vehicles, a mounting bolt for the rear axle housing could break. If this happens, the axle housing can move and cause clunking or banging noises and vibrations from the rear of the vehicle. It could also cause the driveshaft and axle shafts to disconnect. This would result in a loss of power to the rear wheels and the vehicle could move when the transmission is in Park, if the parking brake is not used.
Safety Risk:
A parked vehicle that rolls away could create the risk of an injury or a crash. A loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail. For Police Interceptor Utility models, you will be instructed to take your vehicle to a dealership to replace a bushing and the rear axle housing cover. For all other models, you will be instructed to take your vehicle to a dealership to update the engine control module (PCM) software to set the parking brake when the transmission is in the Park position.
Issue:
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into r…
Read the complete source summary
Issue:
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.
Safety Risk:
A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the image processing module (IPMB) software.
Issue:
On certain vehicles, the right motor mount fasteners may not have been properly tightened. As a result, the engine may vibrate, and the axle may disconnect from the transmission. This can result in loss of power to the wheels.
Safety Risk:
A loss of…
Read the complete source summary
Issue:
On certain vehicles, the right motor mount fasteners may not have been properly tightened. As a result, the engine may vibrate, and the axle may disconnect from the transmission. This can result in loss of power to the wheels.
Safety Risk:
A loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to remove and replace the right motor mount fasteners.
Issue:
On certain vehicles, the driveshaft could break. If this happens, there could be a sudden loss of power to the wheels. A driveshaft that separates could also damage the fuel tank and cause a fuel leak. Additionally, the vehicle could move when the tran…
Read the complete source summary
Issue:
On certain vehicles, the driveshaft could break. If this happens, there could be a sudden loss of power to the wheels. A driveshaft that separates could also damage the fuel tank and cause a fuel leak. Additionally, the vehicle could move when the transmission is in Park, and the parking brake is not used.
Note: This recall only affects vehicles equipped with a 3.0 L or 3.3 L engine.
Safety Risk:
A fuel leak can create the risk of a fire. A loss of power to the wheels could increase the risk of a crash. A parked vehicle that rolls away could also create the risk of an injury or a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driveshaft label. Dealers will replace the driveshaft, if needed.
Issue:
On certain vehicles, an electrical problem with the rearview camera could cause it not to work properly. As a result, the rearview image may be distorted or not display at all.
Safety Risk:
A rearview camera image that does not display could reduce a…
Read the complete source summary
Issue:
On certain vehicles, an electrical problem with the rearview camera could cause it not to work properly. As a result, the rearview image may be distorted or not display at all.
Safety Risk:
A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rearview camera.
Issue:
On certain vehicles, the fasteners that attach the side airbag to the front seat backs may not have been tightened properly. As a result, the side airbag may not deploy properly in a crash.
Safety Risk:
An airbag that does not work properly could in…
Read the complete source summary
Issue:
On certain vehicles, the fasteners that attach the side airbag to the front seat backs may not have been tightened properly. As a result, the side airbag may not deploy properly in a crash.
Safety Risk:
An airbag that does not work properly could increase the risk of injury in a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to verify that the fasteners for the side airbags and seat back modules are properly tightened.
Issue:
On certain vehicles, the protective cover on the engine fuel line may not be long enough. As a result, the fuel line could rub against another fuel line. This could cause damage and result in a fuel leak.
Safety Risk:
A fuel leak in the engine compar…
Read the complete source summary
Issue:
On certain vehicles, the protective cover on the engine fuel line may not be long enough. As a result, the fuel line could rub against another fuel line. This could cause damage and result in a fuel leak.
Safety Risk:
A fuel leak in the engine compartment could result in a fire.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to inspect the protective cover on the fuel line. If the fuel line is not fully covered, the dealer will install and secure a new, longer cover.
Issue:
On certain vehicles, seats with a manual recliner may not meet the strength requirements of Canadian regulations. A seatback with reduced strength may not properly restrain an occupant in a crash.
Safety Risk:
A seatback that moves in a crash could …
Read the complete source summary
Issue:
On certain vehicles, seats with a manual recliner may not meet the strength requirements of Canadian regulations. A seatback with reduced strength may not properly restrain an occupant in a crash.
Safety Risk:
A seatback that moves in a crash could increase the risk of injury.
Corrective Actions:
Ford will notify owners by mail and instruct them to take their vehicle to a Ford or Lincoln dealer for an inspection of the driver and front passenger seat recliners. For 2020 model year Explorer and Aviator, dealers will inspect the rear outboard seats. The seat structures will be replaced as required.
Issue:
On certain vehicles, the cover for the manual park release (MPR) lever may not be installed. If the MPR lever is accidentally pushed, the transmission can be shifted out of PARK without a key in the ignition. Canadian regulations require a cover over …
Read the complete source summary
Issue:
On certain vehicles, the cover for the manual park release (MPR) lever may not be installed. If the MPR lever is accidentally pushed, the transmission can be shifted out of PARK without a key in the ignition. Canadian regulations require a cover over this lever. Additionally, the vehicle may also be in Factory Mode, which disables warning alerts and chimes, and does not display the transmission gear position (under certain conditions).
Safety Risk:
A missing MPR cover could create a situation where the transmission can be shifted without a key in the ignition. If the transmission position is not displayed, a user may not know that the vehicle is not in the PARK position. If the parking brake is not applied, either of these situations could create a risk of a vehicle roll-away and increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect for the MPR cover. If missing, it will be installed. The dealer will also verify that the instrument cluster is not set to Factory Mode.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Explorer AWD AS10
X 2.3 L engine
10.3 L/100 km
Data unavailable
Explorer AWD AS10
X 3.0 L engine
11.8 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Explorer AWD · AS10 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
2.3 L
Cylinders
4
City fuel consumption
11.6 L/100 km
Highway fuel consumption
8.7 L/100 km
Tailpipe CO₂ emissions
241 g/km
Explorer AWD · AS10 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
13.3 L/100 km
Highway fuel consumption
9.8 L/100 km
Tailpipe CO₂ emissions
278 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2020 Ford Explorer, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2026339 (Seats And Restraints). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2026311 (Powertrain). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2026124 (Seats And Restraints). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2020 Ford Explorer.
POWER TRAIN
508
UNKNOWN OR OTHER
213
ELECTRICAL SYSTEM
189
ENGINE
118
BACK OVER PREVENTION
104
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-12
16
2026-01
18
2026-02
12
2026-03
18
2026-04
21
2026-05
20
2026-06
13
2026-07
37
2026-08
17
2026-09
23
2026-10
28
2026-11
8
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
211
25,000–49,999 mi
58
50,000–99,999 mi
106
100,000–149,999 mi
40
150,000+ mi
2
Missing or excluded mileage
842
417 of 1,259 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged37US complaint allegations
Fire flagged10US complaint allegations
Towed flagged49US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
361 matched manufacturer communications · 3 matched investigations. Communications are not necessarily recalls or technical service bulletins.
DP25001 · Underbody shields detachment
The Office of Defects Investigation (ODI) received a petition on August 22, 2025, requesting a defect investigation into an alleged defect of the “underbody shields” on model year (MY) 2020 Ford Explorer vehicles. The petition alleges premature degradation and detachment of the plastic underbody shields, potentially leading to road debris. The petition itself can be reviewed at NHTSA.gov under ODI number 11682326. A search of the subject vehicle population was undertaken using complaints submitted to ODI. No related complaints were found in NHTSA’s database for the subject vehicle population. Subsequently, ODI conducted a broader search for related complaints and field reports involving MY 2020-2025 Ford Explorer and Lincoln Aviator models, as these vehicles utilize substantially similar underbody shields. No complaints or reports were found citing any allegations pertaining to any of the underbody shields. ODI also reviewed manufacturer information and data and did not identify a trend related to the Petitioner’s allegations. Based on the absence of consumer complaints and reports, ODI has not identified a material risk of a complete detachment or a projectile hazard related to this condition. The petitioner's description of detectable symptoms - including noise and vibration that progressively worsen and visible sagging of the shields underneath the vehicle - indicates a failure mode that provides drivers with ample notice to seek service before a potential detachment. In view of the insufficient evidence of a vehicle-based defect pertaining to the underbody shields of the subject vehicle, ODI is denying this Defect Petition. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The Agency reserves the right to take additional action if warranted by future circumstances. To review the report cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
On September 23, 2020, Ford Motor Company (Ford) filed a noncompliance recall report under 49 CFR Part 573 (NHTSA Recall No. 20V-575), recalling 620,246 Model Year (MY) 2020 Ford F-150, F-250, F-350, F-450, F-550, Explorer, Mustang, Transit, Expedition, Escape, Ranger and Edge, and Lincoln Nautilus and Corsair vehicles for a noncompliance with Federal Motor Vehicle Safety Standard (FMVSS) 111, Rear Visibility. Ford's recall described the noncompliance as insufficient electrical conductivity within the printed circuit board (PCB) internal to the camera leading to intermittent rearview camera operation. The supplier of the cameras was Magna Electronics.According to Ford's chronology in the Part 573, during the period February-April 2020, Ford identified and monitored warranty claims pertaining to intermittent or inoperative rearview cameras. Ford reviewed supplier product changes, focusing on changes introduced by the supplier in the October-November 2019 time frame. The Part 573 stated that the issue was brought to Ford's Critical Concerns Review Group (CCRG) for review on May 12, 2020.On July 7, 2020, NHTSA's Vehicle Research and Testing Center (VRTC) informed the Office of Defects Investigation (ODI) of a trend of MY 2020 Escape vehicles with rearview camera malfunctions. ODI contacted Ford the next day, providing five Vehicle Owner Questionnaires (VOQs) alleging inoperative rearview cameras. On July 15, 2020, Ford met with NHTSA to discuss the rearview camera issue. In a subsequent August 24, 2020 meeting, ODI and NHTSA's Office of Vehicle Safety Compliance (OVSC) met with Ford to discuss the recall status and additional VOQs. Ford presented rate and scope data for many of its MY 2020 products during the August 2020 meeting indicating high failure rates for certain models.This RQ is being opened to investigate both the timeliness and scope of Ford's rearview camera recall (20V-575), and Ford's compliance with reporting requirements.The subject reports referenced in the opening resume are identified by the following ODI reference numbers which can be reviewed at NHTSA.gov: 11349813, 11344126, 11342696, 11341486, 11340254, 11337274, 11331444, 11330875, 11329235, 11316960, 11343521, 11341884, 11337226, 11344018, and 11339573.
On July 17, 2023, the Office of Defect Investigation (ODI) opened this Recall Query (RQ) after receiving 2 consumer complaints alleging loss of vehicle forward power and/or loss of transmission torque of the rear wheels in model year (MY) 2020-2022 Ford Explorer vehicles (subject vehicles). The RQ was opened to focus on the effectiveness of the remedies of Recalls 22V-255 and 23V-199 related to the alleged problem. Recall 22V-255 involved replacing the bushing and axle cover in the following subject vehicles: 3.3L FHEV Police built before October 14, 2020, and 3.3L Gas Police vehicle built before January 31, 2021. For 2.3L RWD, 3.0L PHEV, 3.3LFHEV, and 3.0LST retail (non-police) vehicles, the recall provided an PCM software update to engage the Electronic Park Brake (EPB) when Park is commanded. The recall addressed a breakage of the rear axle bolt that can cause the driveshaft/half shafts to disconnect, resulting in a loss of transmission torque to the rear wheels necessary to hold park. If the parking brake is not applied, the loss of the primary park torque will allow the vehicle to roll in park increasing the risk of crash and injury. Recall 23V-199 addressed 674 of the subject vehicles produced from February 2, 2019 to April 4, 2022, which received an incorrect remedy under Recall 22V-255. The affected vehicles had received a previous Powertrain Control Module (PCM) update which did not include an automatic EPB engagement when vehicle is shifted to park. On October 17, 2023, Ford filed a new safety recall (Recall 23V-675) covering 238,364 MY 2020-2022 Explorer vehicles with the following powertrains: 3.3L FHEV Police, 3.3L Gas Police, 3.0L Gas Police, 2.3L RWD, 3.0L PHEV, 3.3L FHEV, 3.0L RWD and 3.0L AWD, produced from October 22, 2018 to July 6, 2022, equipped with a 3-point mounted axle design. Ford stated that the cause of the bolt fracture is due to joint design not robust to peak axle input torques and manufacturing variability. The primary contributor is insufficient bearings for maximum joint loads. This can result in bearing deformation, increasing bending stress on the bolt, which may lead to fatigue failure. On January 19, 2023, Ford amended Recall 23V-675 to add 1,942 MY 2020-2022 Explorer vehicles with the following powertrain: 3.0L RWD Platinum and King Ranch variant, produced from October 22, 2018 to July 6, 2022, equipped with a 3-point mounted axle design. In addition to the safety recall, Ford will conduct a customer satisfaction program for the following MY 2020-2022 Explorer vehicles with the following powertrains: 2.3L AWD, 3.3L Gas Retail, 3.0L Gas AWD Platinum and King Ranch, produced from October 22, 2018 to July 6, 2022. Ford stated that the Explorer powerpack variants not covered under Recalled 23V-675 do not present an unreasonable risk to motor vehicle safety due to the combination of lower peak torque levels and torque management strategies to share inputs between front and rear axles, reducing occurrence of higher torque. According to Ford, this is also evidenced by the lower current and projected failure rates. In view of the recall action being taken by Ford, ODI is closing this RQ. NHTSA will continue to monitor complaints from the customer satisfaction program vehicles and reopen this issue, if necessary. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.