Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Electrical
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Initially as an interim rep…
Read the complete source summary
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a new switch or fused wiring harness.
On certain vehicles, Ford has issued a scheduled maintenance guide update which specifies that every 20 000 kms, the steering linkage, which includes tie-rod ends, should be inspected. The vehicle owner is asked to place the tie-rod end inspection procedure s…
Read the complete source summary
On certain vehicles, Ford has issued a scheduled maintenance guide update which specifies that every 20 000 kms, the steering linkage, which includes tie-rod ends, should be inspected. The vehicle owner is asked to place the tie-rod end inspection procedure supplied with this maintenance guide update in the vehicle's glove box for reference and safekeeping. The vehicle owner is to provide the inspection procedure to their repair facility to help properly identify worn tie-rod ends. Performing the vehicle scheduled maintenance, including maintenance inspections, is the responsibility of the vehicle owner. Failure to replace worn tie-rod ends may eventually result in a tie-rod end separation that could adversely affect steering control. If the inspection reveals that a tie-rod end is worn and must be replaced, the repair will be at the owner's expense unless the vehicle is still covered by the basic vehicle warranty, or has an extended service plan coverage that includes these components.
On certain vehicles, the intermediate steering shaft yoke may not have been properly seated onto the steering gear input shaft during installation. In this condition, the yoke may not be properly clamped to the input shaft. This may result in separation of t…
Read the complete source summary
On certain vehicles, the intermediate steering shaft yoke may not have been properly seated onto the steering gear input shaft during installation. In this condition, the yoke may not be properly clamped to the input shaft. This may result in separation of the yoke from the steering gear input shaft and a loss of steering control, potentially resulting in a vehicle crash. Correction: Dealer will inspect the steering intermediate shaft yoke. If the yoke is not fully seated and the bolt groove and spline is visible, the intermediate shaft and bolt will be replaced as well as the bolt at the steering column connection.
On certain vehicles, the trailer hitch assembly attachment bolts may lose clamp load. If the operator does not notice the condition due to rattle or other looseness of the trailer hitch assembly, there is a potential for the trailer hitch to separate from the…
Read the complete source summary
On certain vehicles, the trailer hitch assembly attachment bolts may lose clamp load. If the operator does not notice the condition due to rattle or other looseness of the trailer hitch assembly, there is a potential for the trailer hitch to separate from the vehicle. Correction: Trailer hitch mounting bolts and nut plates will be replaced with higher strength mounting bolts and nut plates installed at a higher torque and including an adhesive patch.
ON CERTAIN VEHICLES, THE LUG NUTS ON THESE VEHICLES MAY NOT CREATE SUFFICIENT CLAMP LOAD ALLOWING WHEEL MOVEMENT IN RELATION TO THE HUB/ROTOR MOUNTING SURFACE. THIS COULD RESULT IN LOOSENING OF THE LUG NUTS, STUD FATIGUE FAILURE, AND THE POTENTIAL FOR A WHEEL …
Read the complete source summary
ON CERTAIN VEHICLES, THE LUG NUTS ON THESE VEHICLES MAY NOT CREATE SUFFICIENT CLAMP LOAD ALLOWING WHEEL MOVEMENT IN RELATION TO THE HUB/ROTOR MOUNTING SURFACE. THIS COULD RESULT IN LOOSENING OF THE LUG NUTS, STUD FATIGUE FAILURE, AND THE POTENTIAL FOR A WHEEL TO SEPARATE FROM THE VEHICLE. CORRECTION: WHEEL STUDS WILL BE INSPECTED AND WHEEL LUG NUTS WILL BE REPLACED WITH REVISED VERSIONS.
ON CERTAIN VEHICLES, THE AUTOMATIC SHIFT CABLE ASSEMBLY MAY NOT BE PROPERLY SEATED AND COULD SEPARATE FROM THE STEERING COLUMN BRACKET. SHOULD THIS OCCUR, THE OPERATOR WOULD NOT BE ABLE TO SHIFT THE TRANSMISSION FROM ONE OF THE DRIVE GEAR POSITION INTO THE PAR…
Read the complete source summary
ON CERTAIN VEHICLES, THE AUTOMATIC SHIFT CABLE ASSEMBLY MAY NOT BE PROPERLY SEATED AND COULD SEPARATE FROM THE STEERING COLUMN BRACKET. SHOULD THIS OCCUR, THE OPERATOR WOULD NOT BE ABLE TO SHIFT THE TRANSMISSION FROM ONE OF THE DRIVE GEAR POSITION INTO THE PARK POSITION EVEN THOUGH THE GEAR SELECTOR WOULD INDICATE "PARK". THIS COULD RESULT IN UNINTENDED VEHICLE MOVEMENT IF THE PARKING BRAKE IS NOT SET.
CORRECTION: SHIFT CONTROL CABLE WILL BE PROPERLY ATTACHED TO THE STEERING COLUMN BRACKET AND A TIE STRAP WILL BE ADDED TO THAT CONNECTION AS A REDUNDANT MEASURE TO SECURE THE ATTACHMENT.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S 115 - VEHICLE IDENTIFICATION NUMBER. THE FOURTH CHARACTERS OF THE V.I.N. PLATE WHICH IS AFFIXED TO THE INSTRUMENT PANEL ARE CODED "F" RATHER THAN "E". "E" IS THE APPROPRIATE CODE FOR THESE 7000 POUND GVWR VEHICLES. …
Read the complete source summary
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S 115 - VEHICLE IDENTIFICATION NUMBER. THE FOURTH CHARACTERS OF THE V.I.N. PLATE WHICH IS AFFIXED TO THE INSTRUMENT PANEL ARE CODED "F" RATHER THAN "E". "E" IS THE APPROPRIATE CODE FOR THESE 7000 POUND GVWR VEHICLES. AS A CONSEQUENCE, THE NINTH CHARACTER (CHECK DIGIT) OF THE V.I.N. IS ALSO INCORRECT. ONLY THE V.I.N. PLATE IS IN ERROR. THE SAFETY CERTIFICATION LABELS AND OTHER DOCUMENTS ON WHICH THE VEHICLE'S V.I.N. IS LISTED DISPLAY THE CORRECT V.I.N.
CORRECTION: DEALERS WILL REPLACE THE INCORRECT V.I.N. PLATES.
THE REAR AXLE TRACK BRACKET MAY SEPARATE FROM THE FRAME DUE TO MISSING WELDS OR A WELD PATTERN THAT IS NOT COMPATIBLE WITH THE DESIGN OF THE BRACKET. ALSO, THE REAR AXLE LOWER CONTROL ARM BRACKET MAY SEPARATE DUE TO INADEQUATE WELD PENETRATION. IF EITHER OF TH…
Read the complete source summary
THE REAR AXLE TRACK BRACKET MAY SEPARATE FROM THE FRAME DUE TO MISSING WELDS OR A WELD PATTERN THAT IS NOT COMPATIBLE WITH THE DESIGN OF THE BRACKET. ALSO, THE REAR AXLE LOWER CONTROL ARM BRACKET MAY SEPARATE DUE TO INADEQUATE WELD PENETRATION. IF EITHER OF THESE CONDITIONS OCCURS THE VEHICLE CAN BE EASILY CONTROLLED AND BROUGHT TO A STOP. HOWEVER, IF BOTH BRACKETS WERE TO SEPARATE, THE REAR AXLE WOULD BE FREE TO MOVE LATERALLY UNTIL THE TIRES CONTACT EITHER THE FRAME OR WHEELHOUSE. THIS COULD RESULT IN EITHER TIRE DAMAGE OR A SIGNIFICANT REDUCTION IN VEHICLE HANDLING PERFORMANCE.
CORRECTION: A TRACK BAR BRACKET REINFORCEMENT KIT WILL BE INSTALLED AND THE AXLE TUBES WILL BE INSPECTED AND REPLACED IF NECESSARY.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Expedition A4
X 4.6 L engine
15.7 L/100 km
Data unavailable
Expedition A4
X 5.4 L engine
16.6 L/100 km
Data unavailable
Expedition 4X4 A4
X 4.6 L engine
16.7 L/100 km
Data unavailable
Expedition 4X4 A4
X 5.4 L engine
17.6 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 1997 Ford Expedition, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2005028 (Electrical). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2004164 (Steering). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2003141 (Steering). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 1997 Ford Expedition.
SUSPENSION
138
SERVICE BRAKES, HYDRAULIC
96
ELECTRICAL SYSTEM
95
STEERING
94
ENGINE AND ENGINE COOLING
89
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
17-03
17-07
17-10
18-04
18-10
18-12
20-05
20-08
20-10
20-12
22-03
24-05
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2017-03
1
2017-07
1
2017-10
1
2018-04
2
2018-10
1
2018-12
1
2020-05
1
2020-08
1
2020-10
1
2020-12
1
2022-03
1
2024-05
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
8
25,000–49,999 mi
11
50,000–99,999 mi
54
100,000–149,999 mi
87
150,000+ mi
79
Missing or excluded mileage
614
239 of 853 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged52US complaint allegations
Fire flagged74US complaint allegations
Towed flagged1US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
0 matched manufacturer communications · 7 matched investigations. Communications are not necessarily recalls or technical service bulletins.
DP05005 · SPARK PLUG EJECTION FROM CYLINDER HEAD
ON SEPTEMBER 6, 2005, ODI RECEIVED A PETITION REQUESTING THAT THE AGENCY INVESTIGATE ALLEGATIONS OF ENGINE SPARK PLUG EJECTION IN CERTAIN MODEL YEAR 1997 THROUGH 2004 FORD VEHICLES WITH TRITON V-8 AND V-10 ENGINES.ODI RECEIVED A TOTAL OF 474 NON-DUPLICATIVE COMPLAINTS ON THE SUBJECT VEHICLES WHERE THE COMPLAINANT, OR THE DEALER REPAIRING THE VEHICLE, REPORTED THAT A SPARK PLUG DETACHED FROM THE CYLINDER AND/OR EJECTED FROM THE ENGINE.AS OF DECEMBER 8, 2005, ODI IS NOT AWARE OF ANY ALLEGATIONS WHERE THE ALLEGED DEFECT RESULTED IN A LOSS OF VEHICLE CONTROL, A CRASH, AN INJURY, OR A FATALITY IN ANY OF THE 10,319,810 SUBJECT VEHICLES.IN ADDITION, ODI IS AWARE OF ONLY TWO INCIDENTS WHERE THE VEHICLE STALLED WITHOUT RESTART.INFORMATION CONTAINED IN THE ODI CONSUMER COMPLAINTS AND OBTAINED FROM 72 TELEPHONE INTERVIEWS WITH COMPLAINANTS SHOWED THE FOLLOWING:(1) 99% OF THE COMPLAINTS WERE ON MY 1997 TO 2002 SUBJECT VEHICLES.(2) MOST THE COMPLAINANTS REPORTED HEARING A LOUD POP WHILE DRIVING OR UPON STARTING UP THE VEHICLE FOLLOWED BY A LOUD, REPETITIVE CLICKING OR POPPING SOUND.(3) MANY OF THE COMPLAINANTS REPORTED THAT THE POPPING SOUND WAS ACCOMPANIED BY SOME LOSS OF VEHICLE POWER; HOWEVER, IN 99% OF THE INCIDENTS REPORTED, THE VEHICLE DID NOT STALL.IN THE VERY FEW INCIDENTS WHERE THE VEHICLE DID STALL, MOST VEHICLES COULD BE RESTARTED.(4) ONLY A SMALL PERCENTAGE OF THE COMPLAINANTS CITED THAT THEY SMELLED GAS OR A SLIGHT BURNING SMELL WHEN THE INCIDENT OCCURRED.(5) IN ALL BUT A VERY FEW INCIDENTS, VEHICLE DAMAGE WAS LIMITED TO THE ENGINE.IN ONE INCIDENT, THE COMPLAINT REPORTED THAT THE FUEL RAIL WAS DAMAGED AND REPLACED AFTER ONE OF THE SPARK PLUGS EJECTED FROM THE ENGINE; HOWEVER, THE COMPLAINANT REPORTED THAT THE DAMAGE DID NOT RESULT IN ANY TYPE OF FUEL LEAK OR FIRE.IN ANOTHER INCIDENT, THE ONLY INCIDENT WHERE A FIRE WAS ALLEGED, THE COMPLAINANT REPORTED THAT NO FLUID LEAK WAS OBSERVED, BUT THAT A FIRE RESULTED AFTER THE SPARK PLUG HAD EJECTED FROM THE ENGINE AND HE HAD RESTARTED THE VEHICLE AND DRIVEN TO ANOTHER LOCATION.NONE OF THE COMPLAINANTS REPORTED ANY DAMAGE TO THE VEHICLE HOOD.(6) ONLY TWO COMPLAINANTS REPORTED THAT THEY OBSERVED WHAT APPEARED TO BE SOME DROPS OF FUEL COMING FROM THE CYLINDER WHERE THE SPARK PLUG HAD FAILED OR ON THE SPARK PLUG ITSELF; HOWEVER, EACH OF THESE COMPLAINANTS REPORTED THAT THERE WAS NO SMOKE OR FLAMES AS A RESULT OF HIS INCIDENT.AS THE PETITIONER NOTED, AND ODI?S ANALYSIS SHOWED, IT IS POSSIBLE FOR A SPARK PLUG TO DETACH FROM THE ENGINE CYLINDER THREADS IN THE SUBJECT VEHICLES.HOWEVER, ODI?S ANALYSIS OF 474 COMPLAINTS DESCRIBING SUCH INCIDENTS FOUND ONLY A VERY FEW ALLEGED ANY SAFETY-RELATED CONSEQUENCES.NONE OF THESE SHOWED ANY EVIDENCE OF A SERIOUS SAFETY CONSEQUENCE.GIVEN THE LARGE POPULATION AND RELATIVELY LONG EXPOSURE TIME OF THE SUBJECT VEHICLES, THE COMPLAINT ANALYSIS INDICATES THAT THE RISK TO MOTOR VEHICLE SAFETY FROM THE ALLEGED DEFECT IS VERY LOW.IN VIEW OF THE FOREGOING, IT IS UNLIKELY THAT NHTSA WOULD ISSUE AN ORDER FOR THE NOTIFICATION AND REMEDY OF THE ALLEGED DEFECT AT THE CONCLUSION OF THE INVESTIGATION REQUESTED IN THE PETITION.THEREFORE, IN VIEW OF THE NEED TO ALLOCATE AND PRIORITIZE NHTSA?S LIMITED RESOURCES TO BEST ACCOMPLISH THE AGENCY?S SAFETY MISSION, THE PETITION IS DENIED.
EA05-005 IS CLOSED WITH FORD?S ACTIONS IN RECALLS 05V-017, 05V-388, AND 06V-286, RECALLING APPROXIMATELY 6.7 MILLION VEHICLES EQUIPPED WITH TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCHES (SCDS).THE BRAKE SYSTEMS IN THESE RECALLED VEHICLES GENERATE A VACUUM THAT CAN POTENTIALLY CAUSE THE SCDS TO FAIL AND, IN CERTAIN SWITCH INSTALLATION ORIENTATIONS, CATCH FIRE.FORD IS ALSO INCLUDING THE ENTIRE POPULATION OF 1998 EXPLORERS.FORD HAS INFORMED ODI THAT TESTING TO DETERMINE THE CAUSE OF FAILURES IN THE 1998 EXPLORERS WILL CONTINUE AFTER THIS INVESTIGATION IS CLOSED.ODI BELIEVES THAT THE VEHICLES EXHIBITING THE FACTORS CAUSING SCDS FAILURE DESCRIBED IN THIS REPORT CORRELATE WELL WITH THE OBSERVED FAILURE RATES ON THESE VEHICLES BY MODEL AND MODEL YEAR.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST IN THE NON-RECALLED VEHICLES MANUFACTURED WITH SCDS THAT ARE NOT INCLUDED IN FORD?S RECALLS.ODI WILL CONTINUE TO MONITOR THE NON-RECALLED POPULATION FOR INCIDENCE OF ENGINE COMPARTMENT FIRES.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.SEE ATTACHED CLOSING REPORT FOR DETAILS.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.