Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Powertrain
A safety defect may exist in vehicles in which remanufactured automatic transmissions were installed as service replacement parts. The shift lever bolt may not have been torqued to the proper torque specification. If the improperly torqued shift level bolt lo…
Read the complete source summary
A safety defect may exist in vehicles in which remanufactured automatic transmissions were installed as service replacement parts. The shift lever bolt may not have been torqued to the proper torque specification. If the improperly torqued shift level bolt loosens and backs out, the shift lever may disengage from the transmission without warning, and the transmission may not respond to the shifter selection movement by the operator. This could result in the loss of transmission gear selection, and possible unintended vehicle movement, which would increase the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect, and if necessary, replace the shift lever assembly and/or the shift level bolt torqued to the proper specification.
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario,
Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), the forward attachment po…
Read the complete source summary
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario,
Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), the forward attachment point for the lower control arm may separate from the vehicle's subframe. This could affect vehicle handling and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will install a newly designed reinforcement cross-brace.
On certain vehicles equipped with a 3.0L V6 engine and speed control, inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. A stuck t…
Read the complete source summary
On certain vehicles equipped with a 3.0L V6 engine and speed control, inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. A stuck throttle may result in very high vehicle speeds and make it difficult to slow or stop the vehicle if the transmission is not shifted into neutral. This could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the rear engine cover fastener, which will raise the cover in the area of the speed control cable to provide adequate clearance between the cover the speed control cable connector.
Certain vehicles may have been originally equipped with a brake master cylinder reservoir cap that could leak. If brake fluid leaks from the cap, it could come in contact with the ABS module wiring harness connector. The same vehicles were previously involve…
Read the complete source summary
Certain vehicles may have been originally equipped with a brake master cylinder reservoir cap that could leak. If brake fluid leaks from the cap, it could come in contact with the ABS module wiring harness connector. The same vehicles were previously involved in campaign 2007107 to address potentially missing or misplaced seals in the wiring harness connector to the ABS module electronic control unit. If this repair wasn’t done correctly, brake fluid leaking from the reservoir cap could corrode the ABS module electrical connector. This could result in vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the brake master cylinder reservoir cap and modify the ABS electrical system. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
On certain vehicles, the electrical wiring connector to the ABS module may have been manufactured incorrectly. Over time, contaminants can enter the ABS electrical connector interface and corrode the terminals. This could cause the ABS warning indicator to i…
Read the complete source summary
On certain vehicles, the electrical wiring connector to the ABS module may have been manufactured incorrectly. Over time, contaminants can enter the ABS electrical connector interface and corrode the terminals. This could cause the ABS warning indicator to illuminate, an open fuse, and in some instances, smoking, melting or burning of the electrical connector, with the potential for a fire while the vehicle is unattended. In addition, ABS function may be lost. Correction: Dealers will inspect and, if required, repair the wiring connector.
On certain vehicles equipped with a 3.0L V6 engine, during deceleration at vehicle speeds below 64 km/h, the engine may stall due to an excessively rich fuel-air mixture. Correction: Dealer will reprogram the Powertrain Control Module.
On certain vehicles, a post molded into the inside surface of the front safety belt buckle cover may fracture. The fractured buckle cover post may affect the buckle function and may exhibit either "no latch" - an overt condition as the tongue will not latch i…
Read the complete source summary
On certain vehicles, a post molded into the inside surface of the front safety belt buckle cover may fracture. The fractured buckle cover post may affect the buckle function and may exhibit either "no latch" - an overt condition as the tongue will not latch into the buckle, or "partial latch" - likely an overt condition because, although the tongue can be inserted into the buckle and appear to be engaged, it will release from the buckle without the push button being depressed when a relatively low load is applied such as when an occupant moves slightly in the seat. Correction: Dealer will replace both front safety belt buckle covers.
On certain vehicles, the windshield wiper linkage may disengage due to a cracked or fractured ball socket, which could potentially result in sudden and complete loss of windshield wiper function without prior warning. In adverse weather this condition could re…
Read the complete source summary
On certain vehicles, the windshield wiper linkage may disengage due to a cracked or fractured ball socket, which could potentially result in sudden and complete loss of windshield wiper function without prior warning. In adverse weather this condition could result in reduced driver visibility and a possible crash. Correction: Dealers will inspect and if necessary, replace the wiper assembly module.
Certain vehicles may have been built with 4X4 rear hubs instead of instead of 4X2 hubs. If the incorrect hubs are are installed on a 4X2 vehicle, the rear wheels may loosen, or in some cases, separate from the vehicle. If this occurs, vehicle control may be a…
Read the complete source summary
Certain vehicles may have been built with 4X4 rear hubs instead of instead of 4X2 hubs. If the incorrect hubs are are installed on a 4X2 vehicle, the rear wheels may loosen, or in some cases, separate from the vehicle. If this occurs, vehicle control may be adversely affected, which could result in a crash. Correction: Rear hubs will be inspected and replaced if necessary.
On certain vehicles, the o-ring seals in the fuel line connector at the outlet end of the fuel filter may have been damaged when the line was connected to the filter during vehicle assembly. In some cases, the damage to the o-rings may result in a fuel odor, …
Read the complete source summary
On certain vehicles, the o-ring seals in the fuel line connector at the outlet end of the fuel filter may have been damaged when the line was connected to the filter during vehicle assembly. In some cases, the damage to the o-rings may result in a fuel odor, or possibly in fuel dripping from the connection. Fuel leakage in sufficient quantity in the presence of an ignition source could potentially result in a fire. Correction: Fuel line will be inspected and replaced if necessary.
On certain vehicles, the speed control cable may have a cracked speed control cable servo cap or may be missing a servo cap locating tab. The potential exists for the locating tab to enter the servo clutch cavity and interfere with the speed control servo pull…
Read the complete source summary
On certain vehicles, the speed control cable may have a cracked speed control cable servo cap or may be missing a servo cap locating tab. The potential exists for the locating tab to enter the servo clutch cavity and interfere with the speed control servo pulley. This condition would not allow the throttle to return to idle when disengaging the speed control and a vehicle crash could occur. Correction: Vehicles will be inspected and speed control cable and servo will be replaced if necessary.
On certain vehicles, the nut that attaches the steering wheel assembly to the steering column may be upside down in the steering wheel assembly. This could overstress the steering column shaft when the nut is tightened. In addition, the nut may have been crac…
Read the complete source summary
On certain vehicles, the nut that attaches the steering wheel assembly to the steering column may be upside down in the steering wheel assembly. This could overstress the steering column shaft when the nut is tightened. In addition, the nut may have been cracked during manufacture, which could result in the nut fracturing when it is tightened during vehicle assembly. Either of these conditions could potentially lead to the steering wheel becoming loose or separating from the steering column. This could result in loss of steering control and a crash without prior warning. Correction: Dealers will inspect and replace the steering wheel retention armature an, if necessary, the steering column will be replaced.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Escape M5
X 2.0 L engine
10.4 L/100 km
Data unavailable
Escape A4
X 3.0 L engine
12.8 L/100 km
Data unavailable
Escape 4X4 M5
X 2.0 L engine
11.0 L/100 km
Data unavailable
Escape 4X4 A4
X 3.0 L engine
13.1 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Escape · M5 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
2.0 L
Cylinders
4
City fuel consumption
11.4 L/100 km
Highway fuel consumption
9.1 L/100 km
Tailpipe CO₂ emissions
239 g/km
Escape · A4 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
14.7 L/100 km
Highway fuel consumption
10.5 L/100 km
Tailpipe CO₂ emissions
294 g/km
Escape 4X4 · M5 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
2.0 L
Cylinders
4
City fuel consumption
12.0 L/100 km
Highway fuel consumption
9.8 L/100 km
Tailpipe CO₂ emissions
253 g/km
Escape 4X4 · A4 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
15.0 L/100 km
Highway fuel consumption
10.9 L/100 km
Tailpipe CO₂ emissions
301 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2001 Ford Escape, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2015438 (Powertrain). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2014110 (Suspension). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2012235 (Other). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2001 Ford Escape.
ENGINE AND ENGINE COOLING
282
ELECTRICAL SYSTEM
136
POWER TRAIN
128
SERVICE BRAKES, HYDRAULIC
122
VEHICLE SPEED CONTROL
107
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
18-10
19-01
19-02
19-05
19-07
19-08
19-09
20-02
20-08
21-01
21-06
26-05
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2018-10
1
2019-01
1
2019-02
2
2019-05
2
2019-07
1
2019-08
2
2019-09
1
2020-02
1
2020-08
1
2021-01
1
2021-06
1
2026-05
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
55
25,000–49,999 mi
99
50,000–99,999 mi
142
100,000–149,999 mi
105
150,000+ mi
78
Missing or excluded mileage
517
479 of 996 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged76US complaint allegations
Fire flagged58US complaint allegations
Towed flagged7US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
1 matched manufacturer communications · 11 matched investigations. Communications are not necessarily recalls or technical service bulletins.
AQ10001 · Fleet Vehicle Recall Completion Audit
On November 18, 2010, NHTSA's Recall Management Division (RMD) opened an audit query (AQ10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary recall-related remedies on the vehicles owned and then rented/leased for use on the roadways.RMD queried three (3) major motor vehicle manufacturers (Ford, Chrysler, and General Motors) and requested data regarding completion figures for fifteen (15) discreet safety recalls.Analysis of this data demonstrated that rental car recalls completion was neither complete nor consistent.The rental car companies representing the largest market share in the industry were then queried as to their respective policies for the rental, lease, and sale of vehicles with open recalls.The data and responses from the manufacturers and the rental car companies can be found in the document repository by accessing the ?Associated Documents link above.In December 2015, Congress enacted the Fixing America's Surface Transportation (FAST) Act.One section of the Act prohibits rental car companies from renting, leasing, or selling motor vehicles subject to open safety recalls.With the passage of the FAST Act and its prohibition, there is no continuing need for the agency to investigate rental car recall completions.Accordingly, this investigation is closed.The agency reserves the right to open any future investigations, including audits of individual recalls, or groups of recalls, or rental car companies, to examine more closely safety recalls performance and completion issues in this area.
THE OFFICE OF DEFECTS INVESTIGATION (ODI) RECEIVED A DEFECT PETITION DATED MARCH 5, 2009 ALLEGING THAT THE PETITIONER NEVER RECEIVED THE RECALL REMEDY FOR 07V-156 AND THAT, AS A RESULT, THE PETITIONER'S MY2003 FORD ESCAPE CAUGHT FIRE AT THE ABS CONTROL MODULE.IN RESPONSE TO ODI FOLLOW-UP, THE MANUFACTURER VERIFIED THAT THE PETITIONER'S VEHICLE HAD IN FACT RECEIVED SERVICE RELATED TO SAFETY RECALL 07V156 - A FACT LATER CORROBORATED BY THE PETITIONER.CIRCUMSTANCES OF THE FIRE EXPERIENCED IN THE PETITIONER'S REMEDIED VEHICLE INDICATE THAT THE REMEDY WAS INEFFECTIVE.ADDITIONAL REVIEW BY ODI IDENTIFIED AN ADDITIONAL 6 SIMILAR (ALLEGED TO HAVE ORIGINATED IN THE ENGINE COMPARTMENT AT OR NEAR THE ABS CONTROL MODULE ) NON-CRASH FIRE INCIDENTS IN SUBJECT VEHICLES KNOWN TO HAVE RECEIVED THE RECALL REMEDY.ACCORDINGLY, A RECALL QUERY (RQ09-002) HAS BEEN OPENED TO ASSESS THE EFFECTIVENESS OF THE RECALL REMEDY.
FORD'S AND MAZDA'S LETTERS TO NHTSA DATED APRIL 5 AND APRIL 9, 2004, STATE THAT THEY WILL RECALL MODEL YEAR 2001-03 FORD ESCAPE AND MAZDA TRIBUTE VEHICLES WITH THE V6 ENGINE BUILT THRU SEPTEMBER 11, 2002.DEALERS WILL ADJUST ENGINE CALIBRATION IN THE PROGRAMMABLE CONTROL MODULE (PCM), WHICH IN ITS CURRENT SETTING, CAN CAUSE THE ENGINE TO SHUT DOWN IF THE VEHICLE IS DECELERATING AT SPEEDS BELOW 40 MPH. THE ENGINE SHUTS DOWN DUE TO EXCESSIVELY RICH AIR-FUEL MIXTURES BEING SENT TO THE ENGINE.WHEN THE ENGINE SHUTS DOWN, DRIVERS MAY NOTICE A LOSS OF POWER ASSIST FOR THEIR STEERING AND BRAKES. THE MAJORITY OF THE COMPLAINANTS HAVE INDICATED TO THE AGENCY THAT THE STALL IS INTERMITTENT AND CAN HAPPEN MORE THAN ONCE.
Ford and Mazda recalled model year (MY) 2001 through 2004 Ford Escape (07V-156) and Mazda Tribute (07V-157) vehicles due to non-crash fires or non-fire thermal events originating in the engine compartment at or near the ABS control module.Approximately 545,700 vehicles were subject to the initial safety recalls and approximately 424,700 vehicles were serviced under those campaigns. The campaigns addressed potentially damaged, missing or misplaced seals in the ABS control module wiring harness electrical connector that could allow brake fluid to enter the connector, possibly resulting in corrosion, short-circuit, melting, smoke and/or fire.Since the recall, the agency is aware of 260 subject vehicles that have reportedly experienced non-crash fires or non-fire thermal events originating at or near the ABS control module in vehicles some time after being serviced under the campaign. The post-recall repair incident rates for MY 2001 and 2002 subject vehicles are 90.9 and 126.7 (normalized per 100,000 vehicles serviced under the recall campaigns), respectively.These rates are much higher than the post-recall repair incident rate for MY 2003 and 2004 subject vehicles, which are 5.0 and 3.7 per 100K, respectively.Similarly, the post-recall repair key-off fire incident rates in the MY 2001 and 2002 subject vehicles is 54.3 per 100K, compared to 0.5 per 100K for the MY 2003 and 2004 subject vehicles.The agency is aware of 12 key-off fire incidents, all involving MY 2001 and 2002 subject vehicles, where the vehicle was parked inside a structure when the fire started.In five of those incidents, the fire spread from the vehicle to the structure itself.Ford has identified the brake master cylinder reservoir cap in certain MY 2001 and 2002 subject vehicles as a potential source for brake fluid leaks that could affect ABS module connector integrity.The reservoir caps used on the MY 2003 and 2004 subject vehicles are reportedly an improved design from those used on the earlier models.By letter dated January 4, 2012, Ford notified the agency that it would conduct another safety recall (identified by NTHSA Recall No. 12V-005 and Ford Recall No. 11S24) of certain MY 2001 and 2002 Ford Escape vehicles to perform a more thorough remedy to address the risk of fire originating at the ABS control module.In addition to double-checking the ABS control module wiring harness electrical connector weather seal (which should have been addressed under the previous recall campaign), Ford will replace brake master cylinder reservoir caps to address the leaking cap problem and reduce the risk of brake fluid entering the subject electrical connector.Ford will also modify the electrical system such that the ABS control module is de-energized when the ignition key is switched off to further reduce the risk of an unattended vehicle fire in units that may have sustained some small loss of connector integrity that may not be evident upon visual examination.Similarly, Mazda notified the agency by letter dated January 19, 2012, that it would also conduct a safety recall (identified by NTHSA Recall No. 12V-016 and Mazda Recall No. 6712A) of certain MY 2001 and 2002 Mazda Tribute vehicles.Ford estimates repair parts will be available beginning the second quarter of 2012. Until recall repairs are made both Ford and Mazda are advising owners of affected vehicles to reduce the safety concern by parking their vehicles outdoors away from structures to prevent a potential fire from spreading.Accordingly, this investigation is closed.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.