Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Visual System
Issue:
Under certain conditions, the infotainment system could overheat. As a result, the rearview camera image may not display when the transmission is shifted into reverse.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's …
Read the complete source summary
Issue:
Under certain conditions, the infotainment system could overheat. As a result, the rearview camera image may not display when the transmission is shifted into reverse.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the APIM software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to display or to freeze when the transmission is shifted into reverse.
Safety Risk:
A rearview camera image that doesn't display correctly could reduce a driver's abi…
Read the complete source summary
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to display or to freeze when the transmission is shifted into reverse.
Safety Risk:
A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the SYNC software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S14 (Transport Canada recall no. 2022-117) may not have been done correctly. As a result, a second repair is required.
On certain vehicles, a software problem could ca…
Read the complete source summary
Issue:
On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S14 (Transport Canada recall no. 2022-117) may not have been done correctly. As a result, a second repair is required.
On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image.
Safety Risk:
A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC 4 module software.
Issue:
On certain vehicles, the intake valves may not have been manufactured properly. As a result, the valves could break and cause the engine to fail.
Note: This recall only affects certain vehicles equipped with a 2.7L or 3.0L EcoBoost engine. This problem …
Read the complete source summary
Issue:
On certain vehicles, the intake valves may not have been manufactured properly. As a result, the valves could break and cause the engine to fail.
Note: This recall only affects certain vehicles equipped with a 2.7L or 3.0L EcoBoost engine. This problem would cause the engine to run rough and the engine malfunction indicator lamp to turn on.
Safety Risk:
An engine failure could cause a sudden loss of power to the wheels and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the engine.
Issue:
On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image.
Safety Risk:
A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backi…
Read the complete source summary
Issue:
On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image.
Safety Risk:
A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and send a wireless over-the-air software update to each vehicle. Alternatively, you may schedule an appointment to have the update performed at a Ford dealer.
Issue:
On a small number of vehicles, the driver's seat belt pretensioner may be missing components. As a result, the seat belt pretensioner may not work properly in a crash.
Safety Risk:
A seat belt pretensioner that does not work properly could create an…
Read the complete source summary
Issue:
On a small number of vehicles, the driver's seat belt pretensioner may be missing components. As a result, the seat belt pretensioner may not work properly in a crash.
Safety Risk:
A seat belt pretensioner that does not work properly could create an increased risk of injury in a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the driver's seat belt retractor and pretensioner assembly.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Edge A8
X 2.0 L engine
9.8 L/100 km
Data unavailable
Edge AWD A8
X 2.0 L engine
10.0 L/100 km
Data unavailable
Edge AWD AS8
X 2.0 L engine
10.1 L/100 km
Data unavailable
Edge AWD AS8
X 2.7 L engine
11.1 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Edge · A8 — source specification details
Vehicle class
Sport utility vehicle: Small
Engine displacement
2.0 L
Cylinders
4
City fuel consumption
11.2 L/100 km
Highway fuel consumption
8.1 L/100 km
Tailpipe CO₂ emissions
229 g/km
Edge AWD · A8 — source specification details
Vehicle class
Sport utility vehicle: Small
Engine displacement
2.0 L
Cylinders
4
City fuel consumption
11.5 L/100 km
Highway fuel consumption
8.3 L/100 km
Tailpipe CO₂ emissions
236 g/km
Edge AWD · AS8 — source specification details
Vehicle class
Sport utility vehicle: Small
Engine displacement
2.0 L
Cylinders
4
City fuel consumption
11.5 L/100 km
Highway fuel consumption
8.3 L/100 km
Tailpipe CO₂ emissions
237 g/km
Edge AWD · AS8 — source specification details
Vehicle class
Sport utility vehicle: Small
Engine displacement
2.7 L
Cylinders
6
City fuel consumption
12.6 L/100 km
Highway fuel consumption
9.3 L/100 km
Tailpipe CO₂ emissions
262 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2021 Ford Edge, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2026093 (Visual System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2025260 (Visual System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2025141 (Visual System). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2021 Ford Edge.
POWER TRAIN
39
BACK OVER PREVENTION
22
UNKNOWN OR OTHER
18
ELECTRICAL SYSTEM
14
ENGINE
11
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-10
25-11
25-12
26-01
26-02
26-03
26-05
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-10
6
2025-11
2
2025-12
3
2026-01
5
2026-02
5
2026-03
1
2026-05
2
2026-07
6
2026-08
8
2026-09
4
2026-10
3
2026-11
2
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
7
25,000–49,999 mi
9
50,000–99,999 mi
7
100,000–149,999 mi
1
150,000+ mi
0
Missing or excluded mileage
92
24 of 116 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged4US complaint allegations
Fire flagged1US complaint allegations
Towed flagged3US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
150 matched manufacturer communications · 1 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA23002 · Loss of Motive Power
On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family. If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.