Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Visual System
Issue:
On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse.
Note: For certain models, this rec…
Read the complete source summary
Issue:
On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse.
Note: For certain models, this recall also affects incomplete vehicles.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rearview camera.
Issue:
On certain vehicles, the rear brake hoses could fail and cause a progressive brake fluid leak. If this happens, there could be reduced braking.
Note: This problem could cause a change in brake pedal feel and travel.
Safety Risk:
Reduced braking ca…
Read the complete source summary
Issue:
On certain vehicles, the rear brake hoses could fail and cause a progressive brake fluid leak. If this happens, there could be reduced braking.
Note: This problem could cause a change in brake pedal feel and travel.
Safety Risk:
Reduced braking can cause extended stopping distances and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and replace or reroute the rear brake hoses, as necessary.
Issue:
On certain vehicles, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driv…
Read the complete source summary
Issue:
On certain vehicles, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driver attempts to exit the vehicle while the transmission is not in Park, and the parking brake is not applied, the vehicle could move suddenly.
Safety Risk:
Sudden and unexpected movement of the vehicle could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the transmission shifter cable bushing and install a protective service cap. Ford advises that you should apply the parking brake each time the vehicle is parked.
Issue:
On certain vehicles, the front brake hoses could fail, causing a progressive brake fluid leak. If this happens, the driver may experience a change in brake pedal feel and travel. This can cause reduced brake performance.
Note: A brake fluid leak would…
Read the complete source summary
Issue:
On certain vehicles, the front brake hoses could fail, causing a progressive brake fluid leak. If this happens, the driver may experience a change in brake pedal feel and travel. This can cause reduced brake performance.
Note: A brake fluid leak would cause the brake warning light to turn on.
Safety Risk:
Reduced brake performance could cause extended stopping distances and increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the front brake hoses.
Issue:
On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. This recall applies to vehicles originally sold or currently registered in…
Read the complete source summary
Issue:
On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador).
Safety Risk:
A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to replace the bolts and apply a wax sealer. If one or more of the bolts are broken or missing, a new steering gear will be installed.
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 126 - Electronic Stability Control Systems. Vehicles that were brought to a dealer for service may have received an incorrect software update for the Antilock…
Read the complete source summary
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 126 - Electronic Stability Control Systems. Vehicles that were brought to a dealer for service may have received an incorrect software update for the Antilock Brake System Stability Control system. The incorrect software disables the engine torque control of the Electronic Stability Control (ESC) system, and if a fault were to occur in the stability control system, including Antilock Brake System (ABS), Traction Control (T/C), and ESC, no warning lamp/indicator would be displayed to the driver. Additionally, no warning lamp/indicator would be displayed when traction control is disabled, or when the Electric Parking Brake (EPB) is applied. A lack of visual warning to indicate these systems are not functioning would be contrary to the requirements of the standard, and could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the ABS module to correct the non-compliance. Until this software is available, dealers will replace the ABS module.
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur at th…
Read the complete source summary
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur at the steering gear motor attachment bolts. Steering gear motor detachment from the gear housing could result in sudden loss of steering power assist. This would cause the Electronic Stability Control and Traction Control malfunction indicator lamps to illuminate. A vehicle experiencing a loss of steering power assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. A loss of steering power assist could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will apply sealer and replace the steering gear motor attachment bolts as required. If one or more of the steering gear motor attachment bolds are broken or missing, a new steering gear will be installed in the vehicle.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Edge AS6
X 2.0 L engine
9.8 L/100 km
Data unavailable
Edge (Start/Stop) AS6
X 2.0 L engine
9.8 L/100 km
Data unavailable
Edge AS6
X 3.5 L engine
11.3 L/100 km
Data unavailable
Edge AWD AS6
X 2.0 L engine
10.3 L/100 km
Data unavailable
Edge AWD AS6
X 3.5 L engine
11.8 L/100 km
Data unavailable
Edge Sport AWD AS6
X 2.7 L engine
11.9 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Edge Sport AWD · AS6 — source specification details
Vehicle class
Sport utility vehicle: Small
Engine displacement
2.7 L
Cylinders
6
City fuel consumption
13.6 L/100 km
Highway fuel consumption
9.8 L/100 km
Tailpipe CO₂ emissions
274 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2015 Ford Edge, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2025449 (Visual System). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2025435 (Brakes). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2022311 (Powertrain). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2015 Ford Edge.
ENGINE
195
POWER TRAIN
118
UNKNOWN OR OTHER
112
SERVICE BRAKES, HYDRAULIC
78
SERVICE BRAKES
77
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-12
26-01
26-02
26-03
26-04
26-05
26-06
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-12
12
2026-01
6
2026-02
8
2026-03
7
2026-04
13
2026-05
10
2026-06
4
2026-07
3
2026-08
1
2026-09
7
2026-10
4
2026-11
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
144
25,000–49,999 mi
88
50,000–99,999 mi
136
100,000–149,999 mi
66
150,000+ mi
17
Missing or excluded mileage
281
451 of 732 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged18US complaint allegations
Fire flagged3US complaint allegations
Towed flagged33US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
60 matched manufacturer communications · 4 matched investigations. Communications are not necessarily recalls or technical service bulletins.
DP26008 · Loss of Motive Power
The Office of Defects Investigation (ODI) received a petition on August 5, 2026, requesting a defect investigation into the 2.0 Liter EcoBoost engine on model year 2015-2018 Ford Edge vehicles. The petition alleges that engine coolant intrusion results in a significant loss of engine power, accompanied by an "Engine Coolant Over Temperature" warning message. The petition further alleges that after the vehicle has sat and cooled down, the engine runs roughly and generates a check engine light for a cylinder misfire. This defect petition is being opened to evaluate the issue and determine whether to grant or deny the petition. The petition can be reviewed at NHTSA.gov under ODI number 11754989.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
The Office of Defects Investigation (ODI) has received 701 complaints regarding the Auto Start/Stop feature in 2024-2026MY Honda Odyssey, 2024-2026MY Honda Passport, 2024-2026MY Honda Ridgeline, 2024-2026MY Acura MDX and 2024-2026MY Honda Pilot vehicles. To help improve fuel efficiency, the Auto Start/Stop system will automatically shut off the engine when a vehicle comes to a complete stop. The engine is intended to automatically restart when a driver releases the brake pedal. However, the complaints allege that the engines are failing to restart once they have been shut off by this system. Investigation EA25004 also examines Auto Start/Stop failures in certain Honda vehicles. It covers all vehicles involved in this current investigation, except for the 2026 model year. Although both groups experience similar failures, the vehicles in this current investigation appear to have different root causes and respond differently to repairs. ODI is opening this Engineering Analysis (EA) to determine the scope and severity of the potential problem as well as to fully assess the potential safety related issues. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
On October 3, 2024, NHTSA’s Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate instances of rear brake hose ruptures causing a sudden and unexpected loss of braking in model year (MY) 2015-2017 Ford Edge vehicles manufactured by Ford Motor Company. The complaints allege that, without warning, the vehicle lost its ability to brake causing an unanticipated increase in the vehicle’s stopping distance. The complaints also allege that, prior to the rear brake hose rupture event, the vehicle had been serviced under recall 20V-469. Recall 20V469 involved MY 2015-2018 Ford Edge and MY 2016-2018 Lincoln MKX vehicles which may experience front brake hose ruptures causing increased brake pedal travel and a reduction in the rate of deceleration. Ford identified the cause of this safety defect as a consistent localized failure of the internal reinforcement braid of the brake hose due to cyclic fatigue via tensile/bending and torsional inputs during suspension and steering articulations. Ford also identified that only 88% of suspension articulation was utilized on the front brake hose test rig during life cycle testing. These findings, along with ODI’s identification of an emerging trend involving rear brake hose ruptures, prompted the opening of this investigation. ODI identified 64 Vehicle Owners Questionnaires related to this investigation, 2 involving a crash. These consumers were interviewed and reported experiencing sudden loss of braking ability while traveling at low and highway speeds without any prior warning such as a “low brake fluid” warning indicator. Consumers reported that, as they tried to stop their vehicle, the brake pedal traveling to the floorboard and the vehicle required more stopping distance than anticipated or considered normal. Consumers also observed brake fluid present on the rear tires and roadway near the rear tires immediately after the incident. Some consumers provided photographs of the rear brake hose ruptures which depicted a similar rupture pattern and location (near the crimp on the dynamic section of the brake hose). 1 photograph showed an installation alignment mark pulled out near the crimp suggesting exposure to unanticipated tensile forces pulling the hose away from the crimp. During this investigation, Ford responded to Information Request Letters detailing information such as warranty claim data, brake hose specifications and engineering drawings, production part changes logs, and Ford’s assessments of potential root cause. Ford reported that the front and rear brake jounce hoses equipped on the subject vehicle population utilized the same construction and material. Therefore, Ford’s analysis consisted of a comparison between the front and rear hoses demonstrating that the rear hose bend radii in full jounce and full rebound were larger than the front hose. Ford also described that the two hoses are exposed to different loading environments as the rear brake hose is exposed to suspension inputs only, while the front hose is exposed to both suspension and steering inputs; thus, the rear hose is subjected to lower tension and fatigue loads. However, it is important to point out that larger bend radii alone do not necessarily mean a brake hose can withstand the dynamic loading requirements of a brake hose (as discussed earlier, the defect identified in the front brake hoses were attributed to the hose material). Rear brake hose failures were identified through exemplar vehicle and parts inspections conducted by NHTSA’s Vehicle Research and Testing Center. Ford stated that its investigation did not identify any specific or common root cause for this safety defect, and that brake hoses can fail for many reasons including contact with road debris, improper vehicle servicing, and fatigue, as well as vehicle age and miles in service. Based on its assessment of failure rates and warranty claims, Ford concluded that the rear brake hose ruptures did not present an unreasonable risk to motor vehicle safety because consumers would experience a progressive leak accompanied by a red brake warning indicator within the instrument panel and would not experience a total loss of braking due to the diagonally split brake system. Note that these assessments are contrary to the consumer experiences described above. As previously described, consumers described a sudden, unexpected loss of braking ability with no prior warning in their instrument cluster (not a progressive leak) and an increase in anticipated vehicle stopping distance (presenting an unreasonable risk to motor vehicle safety). ODI conveyed these perspectives and investigative findings to Ford during a technical discussion on July 23, 2025. On August 22, 2025, Ford submittedrecall 25V-544 which included MY 2015-2018 Ford Edge and MY 2016-2018 Lincoln MKX vehicles, for a total recall population of 499,129 vehicles. As described in the Part 573, in September 2024, Ford concluded that this concern did not present an unreasonable risk to motor vehicle safety and closed its investigation into allegations involving rear brake jounce hose ruptures within this vehicle population. Ford reopened this investigation in July 2025 following the technical discussion with ODI referenced above. Ford identified the safety defect as a rupture of the rear brake jounce hose resulting in an increase in pedal travel and increase in vehicle stopping distance elevating the risk of a crash. To date, Ford has not fully determined the root cause of this safety defect and is currently working to develop a remedy program. In view of the recall action taken by Ford, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.