CANADA · VEHICLE RESEARCH

2007 Chrysler 300

Canadian recalls & official vehicle records

Full-sizeAS52 source configurations

Evidence updated Nov 17, 2026 · Sources

ChryslerChrysler 300 model-family photograph; generation, year and trim may differ
Model-family image · year, generation and trim may differ.Photo: OWS Photography · CC BY 4.0
7Recall campaignsTransport Canada · exact matches
UnavailableCanadian complaintsNot available in our dataset
2Efficiency configurationsNRCan · Canadian test data
Source-ledResearch approachNo unsupported reliability grades
FROM RESEARCH TO YOUR NEXT CAR

2007 Chrysler 300 for sale

Explore matching dealer listings in Canada. CAD prices · kilometres · Quebec excluded.

Search listings
Show matching dealer listings

Open this section to check available listings. No listing request is made until you open it.

Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.

Canadian owner complaints

Coverage, without substituted US totals.

Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.

Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.

Report a Canadian safety concern ↗

At a Glance

Source configurations, without assumed specifications.

Research marketCanada
Model year2007
Vehicle classFull-size
TransmissionAS5
Engine3.5 L
Recall sourceTransport Canada
Efficiency configurations2
VIN repair statusCheck with manufacturer
View source specifications

Safety Recalls (7)

Canadian archive snapshot, including historical or superseded records.

Other

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: …

Read the complete source summary

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

Transport Canada 2019420 · Aug 21, 2019Official notice ↗

Airbag

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force …

Read the complete source summary

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Transport Canada 2016265 · May 27, 2016Official notice ↗

Airbag

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing t…

Read the complete source summary

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2015-003. Correction: Dealers will replace airbag inflators. All vehicles having received a replacement inflator as part of the previous special service campaign will have a replacement inflator installed.

Transport Canada 2015228 · May 27, 2015Official notice ↗

Airbag

Fiat Chrysler Automobiles (FCA) Canada is conducting a voluntary Safety Improvement Program involving Takata driver and/or passenger airbag inflators installed in certain vehicles that were originally sold or ever registered in certain high humidity areas of t…

Read the complete source summary

Fiat Chrysler Automobiles (FCA) Canada is conducting a voluntary Safety Improvement Program involving Takata driver and/or passenger airbag inflators installed in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States. Fiat Chrysler Automobiles (FCA) will replace the driver and/or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in Florida, Hawaii, Puerto Rico, and the U.S. Virgin Islands should contact a Fiat Chrysler Automobile (FCA) dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: For the 2003 model year Dodge RAM, only the passenger side inflator would need replacement. Additional Note: This special service campaign was replaced by recalls 2015094 and 2015228. Please see these recalls for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015094">Click here for more information on the 2015094 recall</a> <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015228">Click here for more information on the 2015228 recall</a>

Transport Canada 2015093 · Mar 3, 2015Official notice ↗

Airbag

Chrysler Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Chrysler Canada will replace the driver's inflator on affected vehicles. This action is not being co…

Read the complete source summary

Chrysler Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Chrysler Canada will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015228. Please see recall 2015228 for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015228">Click here for more information</a>

Transport Canada 2015003 · Jan 6, 2015Official notice ↗

Brakes

On certain vehicles, the Anti-lock Brake System (ABS) control module software may cause the rear brakes to lock-up during certain braking conditions. This could result in a loss of vehicle control and cause a crash without warning. Correction: Dealers will r…

Read the complete source summary

On certain vehicles, the Anti-lock Brake System (ABS) control module software may cause the rear brakes to lock-up during certain braking conditions. This could result in a loss of vehicle control and cause a crash without warning. Correction: Dealers will reprogram the ABS electronic control unit.

Transport Canada 2006373 · Dec 27, 2006Official notice ↗

Powertrain

On certain vehicles equipped with the 42RLE automatic transmission, the Powertrain Control Module (PCM) may cause a momentary lock up of the drive wheels if the vehicle is traveling over 65 kph and the operator shifts from drive to neutral and back to drive. …

Read the complete source summary

On certain vehicles equipped with the 42RLE automatic transmission, the Powertrain Control Module (PCM) may cause a momentary lock up of the drive wheels if the vehicle is traveling over 65 kph and the operator shifts from drive to neutral and back to drive. Correction: Dealers will reprogram the PCM.

Transport Canada 2006218 · Sep 8, 2006Official notice ↗

Check your individual VIN

Model-year recalls do not establish repair completion.

Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.

Canadian recall and VIN lookup guidance ↗
RECHECK EVIDENCE LAB

Your annual energy budget

Use official test estimates with your own distance and prices.

Enter a price to estimate your annual energy budget.

Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.

Compare Model Years

Explore documented Chrysler 300 records.

Totals reflect different time on the road and configurations. Fewer reports do not establish greater reliability.

Compare vehicles side by side →

RECHECK EVIDENCE LAB

Your vehicle’s evidence passport

What to investigate first for the 2007 Chrysler 300.

1. Check recall repairs

7 matched Canadian recall campaigns. Start with the notices below and confirm applicability and repair completion for your VIN.

Review all 7 matched campaigns →

2. Know the reported themes

Canadian owner complaint totals are not available in our dataset. This is not a zero-complaint finding.

Research Canadian recalls below. Optional US complaint context is separate and does not establish Canadian experience.

Take a tailored checklist to your mechanic →
Coverage, sources and what remains unknown
Recall source
Transport Canada
Matched campaigns
7
Canadian complaint records
Unavailable
Efficiency configurations
2
Canadian investigations
Not imported
Repair completion
Not established

Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.

Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.

Specifications & Efficiency

Official source configurations. No trim is assumed.

Source configurationFuel / powertrainCombined efficiencyRange
300
AS5
X 3.5 L engine12.0 L/100 kmData unavailable
300 AWD
AS5
X 3.5 L engine13.3 L/100 kmData unavailable

Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.

More from the official configuration records

Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.

300 · AS5 — source specification details
Vehicle classFull-size
Engine displacement3.5 L
Cylinders6
City fuel consumption14.0 L/100 km
Highway fuel consumption9.6 L/100 km
Tailpipe CO₂ emissions276 g/km
300 AWD · AS5 — source specification details
Vehicle classFull-size
Engine displacement3.5 L
Cylinders6
City fuel consumption15.5 L/100 km
Highway fuel consumption10.6 L/100 km
Tailpipe CO₂ emissions306 g/km

Canadian defect investigations

Check the current official Transport Canada register.

Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.

Look up Canadian investigations ↗

Before You Buy

Questions to take to a seller or qualified mechanic.

  • Verify the VIN and ask the manufacturer to confirm applicability and completion of recall repairs.
  • Ask for documentation related to the official Other campaign (2019420).
  • Ask for documentation related to the official Airbag campaign (2016265).
  • Ask a mechanic to investigate any symptoms associated with reported categories; complaints alone are not a diagnosis.
  • Review service records and arrange an independent pre-purchase inspection.
Read the complete inspection checklist →
RECHECK EVIDENCE LAB

Take this to your mechanic

A research brief for the 2007 Chrysler 300, built from this report.

  1. Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
  2. Ask for repair documentation for campaign 2019420 (Other). A model-year match does not establish that this VIN is affected.
  3. Ask for repair documentation for campaign 2016265 (Airbag). A model-year match does not establish that this VIN is affected.
  4. Ask for repair documentation for campaign 2015228 (Airbag). A model-year match does not establish that this VIN is affected.
  5. Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records

These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.

Reported Problem Categories

US NHTSA complaints for the 2007 Chrysler 300.

POWER TRAIN
189
AIR BAGS
132
ELECTRICAL SYSTEM
57
ENGINE
36
UNKNOWN OR OTHER
35

US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.

Reports Over Time

US complaints by filing month, latest 12 observed months.

A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.

Read chart data
2021-071
2022-011
2023-011
2023-023
2023-121
2024-041
2024-091
2024-101
2025-021
2025-082
2025-121
2026-101
RECHECK EVIDENCE LAB

The mileage lens

Where the available US complaint records fall by reported mileage.

Reported mileage at incidentMatched complaint records
Below 25,000 mi23
25,000–49,999 mi49
50,000–99,999 mi148
100,000–149,999 mi85
150,000+ mi27
Missing or excluded mileage166

332 of 498 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.

Crash flagged18US complaint allegations
Fire flagged12US complaint allegations
Towed flagged17US complaint allegations

Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.

Bulletins & Investigations

US official records; applicability in Canada is not established.

13 matched manufacturer communications · 3 matched investigations. Communications are not necessarily recalls or technical service bulletins.

EA15001 · Air Bag Inflator Rupture

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492

Opened 20150224 · No closure date in source

Official investigation archive ↗
EA21002 · Desiccated Air Bag Inflator Rupture

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Opened 20210917 · No closure date in source

Official investigation archive ↗
PE14016 · Air Bag Inflator Rupture

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492

Opened 20140611 · Closed 20150302

Official investigation archive ↗
Communication 11025727

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 11025724

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2025-2026 · Publication date unavailable in export.

Official source archive ↗
Communication 10248509

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10244348

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10221097

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10220489

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10219732

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗
Communication 10219725

Official source metadata matches this vehicle. Read the document in the NHTSA archive for its contents and applicability.

Source received period 2020-2024 · Publication date unavailable in export.

Official source archive ↗

Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.

Sources & Last Updated

Trace the evidence behind this report.

Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.
US communications & investigations · Official datasets · Communications received 2020–2026, exact matches; investigations full-history export.