Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Other
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: …
Read the complete source summary
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Safety Risk:
Glass that breaks in to large pieces could create a risk of injury.
Corrective Actions:
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Certain vehicles equipped with front vented-heated passenger seats may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection. The Automatic Occupant Sensing (AOS) system may contain a calibration-learning e…
Read the complete source summary
Certain vehicles equipped with front vented-heated passenger seats may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection. The Automatic Occupant Sensing (AOS) system may contain a calibration-learning error that will cause the AOS system to fail to suppress the front passenger airbag when an infant seat is placed in the front passenger seat. The front-passenger airbag status light will indicate that the airbag is “on” when the passenger seat is not occupied or is occupied by an infant. Additionally, the front-passenger seat’s safety-belt warning light and chime may turn on when the passenger seat is not occupied and the seatbelt is not buckled. If, despite safety warnings and provincial regulations, a child was placed in a child car seat secured in the passenger front position, the active airbag could deploy in a crash causing potential injury. Correction: Dealers will correct the calibration-learning error by preconditioning the empty seat and resetting the seat zero-value in the ECU.
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 135 - Brake Systems. The electronic parking brake may not fully release, which could cause the brakes to drag. In this condition, the parking brake indicator also m…
Read the complete source summary
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 135 - Brake Systems. The electronic parking brake may not fully release, which could cause the brakes to drag. In this condition, the parking brake indicator also may not illuminate even though the parking brake is engaged, contrary to the requirements of the standard. Brake drag could affect vehicle acceleration and cause undesired deceleration, excessive brake heat, and premature wear to some brake components. If the brake drag is significant or if the vehicle is operated for an extended period of time in this condition, there is a potential for the rear brakes to generate significant heat, smoke and sparks. Correction: Dealers will update the electronic parking brake software. Note: This recall involves vehicles that were previously repaired incorrectly under recall 2014-380 and therefore require re-inspection and/or repair.
Certain vehicles may experience an intermittent or lasting loss or reduction of power steering assist. If the power steering assist is lost or reduced, a message is displayed on the Driver Information Centre and a chime sounds to inform the driver. Steering c…
Read the complete source summary
Certain vehicles may experience an intermittent or lasting loss or reduction of power steering assist. If the power steering assist is lost or reduced, a message is displayed on the Driver Information Centre and a chime sounds to inform the driver. Steering control can be maintained, as the vehicle will revert to a manual steering mode, but will require greater driver effort particularly at low vehicle speeds. The sudden change in steering effort may increase the risk of a crash causing injury and/or property damage. Correction: Dealers will repair an electrical ground connection at the power steering control module and update software.
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 135 - Brake Systems. The electronic parking brake may not fully release, which could cause the brakes to drag. In this condition, the parking brake indicator also m…
Read the complete source summary
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 135 - Brake Systems. The electronic parking brake may not fully release, which could cause the brakes to drag. In this condition, the parking brake indicator also may not illuminate even though the parking brake is engaged, contrary to the requirements of the standard. Brake drag could affect vehicle acceleration and cause undesired deceleration, excessive brake heat, and premature wear to some brake components. If the brake drag is significant or if the vehicle is operated for an extended period of time in this condition, there is a potential for the rear brakes to generate significant heat, smoke and sparks. Correction: Dealers will update the electronic parking brake software.
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 201 - Occupant Protection. The center console door may not remain closed in a rear impact, contrary to the requirements of the standard. This could increase the risk …
Read the complete source summary
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 201 - Occupant Protection. The center console door may not remain closed in a rear impact, contrary to the requirements of the standard. This could increase the risk of injury in a crash. Correction: Dealers will replace the center console door latch.
Certain vehicles equipped with automatic transmissions may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 102 - Transmission Control Functions and CMVSS 114 - Theft Protection and Rollaway Prevention. The shift cable adjuster may have been da…
Read the complete source summary
Certain vehicles equipped with automatic transmissions may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 102 - Transmission Control Functions and CMVSS 114 - Theft Protection and Rollaway Prevention. The shift cable adjuster may have been damaged at time of assembly and could disengage, causing the transmission to remain in a gear position different from the one indicated in the instrument panel. If the shift cable were to disengage while driving, upon stopping the vehicle, a driver could move the transmission range selector lever to the PARK position and remove the key, without the transmission being in PARK. If the parking brake is not set, the vehicle could roll, potentially resulting in a crash increasing the risk of injury and/or property damage. Correction: Dealers will inspect and install a revised adjuster and clip if necessary.
On certain vehicles, the brake lamps could flash intermittently without the brake pedal being depressed. This would convey a confusing message to following road users who, in turn, may not react in a timely manner when the driver does apply the brakes. As su…
Read the complete source summary
On certain vehicles, the brake lamps could flash intermittently without the brake pedal being depressed. This would convey a confusing message to following road users who, in turn, may not react in a timely manner when the driver does apply the brakes. As such, this could result in a crash causing property damage and/or personal injury. Correction: Dealers will reprogram the Body Control Module. Note: This recall supersedes 2013-176.
On certain vehicles, the brake lamps could flash intermittently without the brake pedal being depressed. This would convey a confusing message to following road users who, in turn, may not react in a timely manner when the driver does apply the brakes. As su…
Read the complete source summary
On certain vehicles, the brake lamps could flash intermittently without the brake pedal being depressed. This would convey a confusing message to following road users who, in turn, may not react in a timely manner when the driver does apply the brakes. As such, this could result in a crash causing property damage and/or personal injury. Correction: Dealers will reprogram the Body Control Module.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
Impala Eco AS6
X 2.4 L engine
8.7 L/100 km
Data unavailable
Impala AS6
X 2.5 L engine
9.6 L/100 km
Data unavailable
Impala AS6
X 3.6 L engine
10.6 L/100 km
Data unavailable
Impala AS6
E 3.6 L engine
14.3 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Impala Eco · AS6 — source specification details
Vehicle class
Full-size
Engine displacement
2.4 L
Cylinders
4
City fuel consumption
10.0 L/100 km
Highway fuel consumption
7.0 L/100 km
Tailpipe CO₂ emissions
200 g/km
Impala · AS6 — source specification details
Vehicle class
Full-size
Engine displacement
2.5 L
Cylinders
4
City fuel consumption
11.3 L/100 km
Highway fuel consumption
7.5 L/100 km
Tailpipe CO₂ emissions
221 g/km
Impala · AS6 — source specification details
Vehicle class
Full-size
Engine displacement
3.6 L
Cylinders
6
City fuel consumption
12.6 L/100 km
Highway fuel consumption
8.2 L/100 km
Tailpipe CO₂ emissions
244 g/km
Impala · AS6 — source specification details
Vehicle class
Full-size
Engine displacement
3.6 L
Cylinders
6
City fuel consumption
16.7 L/100 km
Highway fuel consumption
11.3 L/100 km
Tailpipe CO₂ emissions
229 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2014 Chevrolet Impala, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2019420 (Other). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2015325 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2015059 (Brakes). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2014 Chevrolet Impala.
ELECTRICAL SYSTEM
221
STEERING
141
ELECTRONIC STABILITY CONTROL (ESC)
104
UNKNOWN OR OTHER
87
SERVICE BRAKES
83
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-09
25-10
25-11
25-12
26-01
26-02
26-05
26-07
26-08
26-09
26-10
26-11
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-09
2
2025-10
1
2025-11
3
2025-12
1
2026-01
1
2026-02
2
2026-05
1
2026-07
1
2026-08
1
2026-09
4
2026-10
2
2026-11
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
103
25,000–49,999 mi
84
50,000–99,999 mi
191
100,000–149,999 mi
68
150,000+ mi
16
Missing or excluded mileage
177
462 of 639 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged19US complaint allegations
Fire flagged8US complaint allegations
Towed flagged14US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
536 matched manufacturer communications · 2 matched investigations. Communications are not necessarily recalls or technical service bulletins.
AQ17002 · BiCal Chevrolet/Loss of Power Steering
NHTSA opened AQ17-002 to determine whether BiCal Chevrolet of Valley Stream, New York (BiCal) has complied with the requirements of the National Traffic and Motor Vehicle Safety Act, 49 U.S.C. Chapter 301 (Safety Act) and its implementing regulations. The Safety Act requires, among other things, that a manufacturer notify its dealers of defects related to motor vehicle safety and non-compliances with Federal Motor Vehicle Safety Standards and, in turn, that a dealer not sell a new vehicle subject to a recall unless the recall remedy has been performed (49 U.S.C. ?30120(i)).NHTSA issued an information request (IR) letter to BiCal on March 15, 2017. BiCal responded to this request on November 8, 2017. On March 16, 2017, an IR letter was issued to General Motors LLC (GM) and a response was received from GM on April 28, 2017. In NHTSA?s view, it had difficulties in obtaining responses to IR letters from BiCal throughout the AQ investigation, including not receiving a response to the first IR until more than three months after the original deadline. Additionally, in NHTSA's view, BiCal failed to provide a full response to the second IR. BiCal does not contest NHTSA's conclusion that it violated the Safety Act by initially failing to provide full and complete responses to the IRs from NHTSA by their deadlines. NHTSA's investigation also indicated that BiCal sold and delivered at least 54 recalled vehicles that did not have the recall remedy completed at the time the vehicles were delivered to the customers.BiCal did not contest NHTSA?s conclusion that it violated the Safety Act by selling and delivering certain new motor vehicles that were subject to a recall before the vehicles were remedied.Under a Settlement Agreement dated March 11, 2019, BiCal agreed to pay compromised civil penalties in the amount of $40,000. This Audit Query is closed.
On April 15, 2014, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE14-010 based on two complaints alleging incidents of sudden/severe uncommanded braking resulting in rear impact collisions in model year (MY) 2014 Chevrolet Impala vehicles.ODI analyzed all complaints related to allegations of unwanted brake activations while driving that were provided by GM or submitted to ODI from consumers and has not identified any additional incidents involving sudden, extended (greater than 1 second) autonomous braking.The two crash complaints that were the basis of PE14-010 involved rental vehicles equipped with an Electric Park Brake (EPB) system.Neither vehicle was equipped with Full Speed Range Adaptive Cruise Control (FSRACC) or Forward Collision Alert (FCA) systems. According to GM, brake lights will be illuminated if the service brakes are applied or the EPB system is activated while the vehicle is moving (dynamic EPB brake apply).In a dynamic EPB brake apply, the Electric Brake Control Module (EBCM) initiates a controlled deceleration while activating a chime and a telltale light.If the service brake is applied at any time during dynamic EPB brake apply, the system provides a substantially greater deceleration.Witness statements and analysis of crash data from the two incidents are consistent with inadvertent dynamic EPB brake applications.Both reports alleged beeping noise immediately before the accidents and one pre-crash data report shows a moderate initial vehicle deceleration followed by in increase in deceleration to approximately 0.6g just prior to the vehicle stopping and being struck from the rear.During this investigation, General Motors LLC (GM) inspected the two crash incident vehicles and examined each of the EPB switches to assess potential mechanical and electrical fault conditions.The testing and part examination did not find any evidence of mechanical or electrical failure of the EPB switches and GM did not identify any faults in the subject components or systems that could have caused or contributed to autonomous brake applications in the incident vehicles.According to GM, the evidence indicates the events were caused by inadvertent driver actuation of the EPB switch. Additionally, during this investigation, GM identified a defect condition in the EPB software in approximately 132,921 model year (MY) 2014 through 2015 Chevrolet Impala and MY 2013 through 2015 Cadillac XTS vehicles (Recall No. 14V-541) that could result in failure of the EPB to release after vehicle start-up.In this condition, the electronic parking brake piston actuation arm may not fully retract when the driver disengages the EPB, which may cause the brake pads to stay partially engaged with the rotor.According to GM, the parking brake indicator may not illuminate when the EPB is engaged and the driver may experience poor vehicle acceleration, undesired deceleration during idle coast-down, excessive brake heat, and premature wear to some brake components. If the vehicle is operated for an extended period of time in this condition, there is a potential for the rear brakes to generate significant heat, smoke, and sparks.GM and its supplier, Mando Pyeongtaek, upgraded the EPB software to address brake drag conditions and issued a recall bulletin on September 4, 2014 instructing dealers to reprogram the electronic parking brake control module on all affected vehicles. This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, see Attachment A to this c
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.