Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Engine
Issue:
On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit.
Safety Risk:
A short circu…
Read the complete source summary
Issue:
On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit.
Safety Risk:
A short circuit can create the risk of a fire, even while the vehicle is parked and turned off.
Corrective Actions:
To reduce the safety risk, BMW advises you to park your vehicle outdoors and away from other vehicles or structures until the recall repairs are completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the water pump and electrical connector. The dealer will also install a shield on the connector.
Issue:
On certain vehicles, the exhaust gas recirculation (EGR) cooler could crack internally and leak. If this happens, you may notice the following symptoms: a warning symbol in the instrument cluster displaying a loss of coolant, reduced engine power, an u…
Read the complete source summary
Issue:
On certain vehicles, the exhaust gas recirculation (EGR) cooler could crack internally and leak. If this happens, you may notice the following symptoms: a warning symbol in the instrument cluster displaying a loss of coolant, reduced engine power, an unpleasant exhaust odour, an unusual noise from the engine and/or smoke from the engine compartment.
Note: This recall replaces Transport Canada Recall no. 2018-587.
Safety Risk:
A cracked EGR cooler could create the risk of an engine fire.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the EGR cooler. The dealer will also inspect the intake manifold, and replace it, if necessary.
Issue:
On certain vehicles equipped with a diesel engine, the high-pressure fuel pump may wear prematurely. This can cause reduced engine performance and could lead to a sudden engine stall.
Note: A warning lamp on the instrument cluster will turn on if the …
Read the complete source summary
Issue:
On certain vehicles equipped with a diesel engine, the high-pressure fuel pump may wear prematurely. This can cause reduced engine performance and could lead to a sudden engine stall.
Note: A warning lamp on the instrument cluster will turn on if the fuel pressure drops.
Safety Risk:
A loss of engine power could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the high-pressure fuel pump.
On certain vehicles, the front left lower control arm pivot bolt may not have been properly hardened during the manufacturing process. This could cause the front left lower control arm pivot bolt to break, which could affect vehicle handling and control, incre…
Read the complete source summary
On certain vehicles, the front left lower control arm pivot bolt may not have been properly hardened during the manufacturing process. This could cause the front left lower control arm pivot bolt to break, which could affect vehicle handling and control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the front left lower control arm and replace it as necessary.
On certain vehicles, the lower control arm suspension bolts may not have been tightened properly during the manufacturing process. Loose lower control arm suspension bolts could affect vehicle handling, which would increase the risk of a crash causing injury a…
Read the complete source summary
On certain vehicles, the lower control arm suspension bolts may not have been tightened properly during the manufacturing process. Loose lower control arm suspension bolts could affect vehicle handling, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the lower control arm suspension bolts and tighten them to specification.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
X5 xDrive40e AS8
B/Z* / Z 2.0 L engine
4.2 ([36.9 kWh + 0.0 L]/100 km) Le/100 km Source fuel mode: 9.9 L/100 km
Source range 1: 23 km Source range 2: 842 km
X5 xDrive35d AS8
D 3.0 L engine
9.3 L/100 km
Data unavailable
X5 xDrive35i AS8
Z 3.0 L engine
11.5 L/100 km
Data unavailable
X5 xDrive50i AS8
Z 4.4 L engine
13.5 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
X5 xDrive40e · AS8 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
2.0 L
Cylinders
4
Motor output
83 kW
City fuel consumption
10.2 L/100 km
Highway fuel consumption
9.5 L/100 km
Source recharge time
3 h
Tailpipe CO₂ emissions
154 g/km
X5 xDrive35d · AS8 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
10.3 L/100 km
Highway fuel consumption
8.0 L/100 km
Tailpipe CO₂ emissions
246 g/km
X5 xDrive35i · AS8 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
13.0 L/100 km
Highway fuel consumption
9.8 L/100 km
Tailpipe CO₂ emissions
270 g/km
X5 xDrive50i · AS8 — source specification details
Vehicle class
Sport utility vehicle: Standard
Engine displacement
4.4 L
Cylinders
8
City fuel consumption
15.4 L/100 km
Highway fuel consumption
11.2 L/100 km
Tailpipe CO₂ emissions
317 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2018 BMW X5, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2024468 (Engine). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2021711 (Engine). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2021469 (Fuel System). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2018 BMW X5.
ELECTRICAL SYSTEM
15
ENGINE
11
FUEL/PROPULSION SYSTEM
11
UNKNOWN OR OTHER
11
POWER TRAIN
10
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
25-04
25-05
25-06
25-07
25-09
25-10
26-02
26-04
26-05
26-08
26-09
26-10
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2025-04
2
2025-05
1
2025-06
2
2025-07
1
2025-09
2
2025-10
1
2026-02
1
2026-04
3
2026-05
1
2026-08
3
2026-09
2
2026-10
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
9
25,000–49,999 mi
3
50,000–99,999 mi
6
100,000–149,999 mi
0
150,000+ mi
0
Missing or excluded mileage
55
18 of 73 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged2US complaint allegations
Fire flagged2US complaint allegations
Towed flagged3US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
82 matched manufacturer communications · 3 matched investigations. Communications are not necessarily recalls or technical service bulletins.
DP22005 · Pedestrian alert sounds
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.