Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Engine
Issue:
On certain vehicles, the variable camshaft timing (VANOS) adjustment unit housing bolts could loosen or break. As a result, the camshaft could become incorrectly adjusted and cause the engine to enter a reduced power mode (limp mode) or to stall while d…
Read the complete source summary
Issue:
On certain vehicles, the variable camshaft timing (VANOS) adjustment unit housing bolts could loosen or break. As a result, the camshaft could become incorrectly adjusted and cause the engine to enter a reduced power mode (limp mode) or to stall while driving.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the VANOS bolts.
Issue:
On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat.
Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehic…
Read the complete source summary
Issue:
On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat.
Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair.
Safety Risk:
An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycli…
Read the complete source summary
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycli…
Read the complete source summary
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more fo…
Read the complete source summary
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. This may cause the belt to detach, resulting in a sudden loss of power steering assist. A vehicle experiencing a loss of power steering assist would rev…
Read the complete source summary
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. This may cause the belt to detach, resulting in a sudden loss of power steering assist. A vehicle experiencing a loss of power steering assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt. Note: This recall supersedes and expands upon recall 2012-396.
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary wate…
Read the complete source summary
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied. Additional note: This is an expansion of recalls 2011-376 and 2012-008.
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could in…
Read the complete source summary
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could increase the risk of injury and/or damage to property. Correction: Dealers will replace the PCV valve heater.
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potential…
Read the complete source summary
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potentially cause the fuel pump to stop working causing the vehicle to stall without warning, increasing the risk of a crash causing injury and/or damage to property. Also, in a very rare case, a fuel leak combined with an external ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery module.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing t…
Read the complete source summary
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. In rare instances the engine could stall,…
Read the complete source summary
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. In rare instances the engine could stall, increasing the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace housing bolts that break and perform associated repairs for 10 years/unlimited mileage from the vehicle's in-service date. Note: This applies only to vehicles not covered by recall 2014-127.
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collisi…
Read the complete source summary
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace affected bolts.
On certain vehicles equipped with a diesel engine, the fuel filter heater (used for warming diesel fuel during vehicle operation at low ambient air temperature) could malfunction. This could allow permanent activation of the fuel filter heater, including acti…
Read the complete source summary
On certain vehicles equipped with a diesel engine, the fuel filter heater (used for warming diesel fuel during vehicle operation at low ambient air temperature) could malfunction. This could allow permanent activation of the fuel filter heater, including activation on a parked vehicle with the ignition in the OFF position, which could drain the battery. A discharged battery would prevent engine start-up. In certain cases the heater unit could overheat, which could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filter heater assembly. Note: This is an expansion of recall 2011-310.
On certain vehicles, a check valve in the brake vacuum pump may leak a small amount of lubricating oil. Over time, this could result in contamination of the brake booster. Loss of brake power assist could occur which, in conjunction with traffic, road condit…
Read the complete source summary
On certain vehicles, a check valve in the brake vacuum pump may leak a small amount of lubricating oil. Over time, this could result in contamination of the brake booster. Loss of brake power assist could occur which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the brake booster and master cylinder. Additionally, the brake vacuum line (including the check valve) will be replaced to eliminate the possibility of oil reaching the brake booster.
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. As such, the belt may become detached, resulting in a sudden loss of steering power assist. A vehicle experiencing a loss of steering power assist wou…
Read the complete source summary
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. As such, the belt may become detached, resulting in a sudden loss of steering power assist. A vehicle experiencing a loss of steering power assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt and tighten with a revised torque procedure. A thread locking compound will be applied to the replacement bolt.
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action w…
Read the complete source summary
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxili…
Read the complete source summary
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
On certain X5 M vehicles, the front side marker lamps are not illuminated as required by the Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. These vehicles were equipped with front side marker lamps, but not with the po…
Read the complete source summary
On certain X5 M vehicles, the front side marker lamps are not illuminated as required by the Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. These vehicles were equipped with front side marker lamps, but not with the power supply cables leading to the lamps. As a result, the front side marker lamps do not illuminate. Reduced visibility increases the risk of crash causing property damage, personal injury or death. Correction: Dealers will install power supply cables for the front side marker lamps.
On certain vehicles, windshield bonding may be insufficient and, in case of a vehicle rollover, this could adversely affect the rigidity of the vehicle bodyshell structure, which could result in personal injury or death. Correction: Dealers will remove and re…
Read the complete source summary
On certain vehicles, windshield bonding may be insufficient and, in case of a vehicle rollover, this could adversely affect the rigidity of the vehicle bodyshell structure, which could result in personal injury or death. Correction: Dealers will remove and refit the windshield.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
X5 xDrive30i A6
Z 3.0 L engine
13.3 L/100 km
Data unavailable
X5 xDrive35d A6
D 3.0 L engine
10.7 L/100 km
Data unavailable
X5 xDrive48i A6
Z 4.8 L engine
14.9 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
X5 xDrive30i · A6 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
15.2 L/100 km
Highway fuel consumption
11.0 L/100 km
Tailpipe CO₂ emissions
306 g/km
X5 xDrive35d · A6 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
3.0 L
Cylinders
6
City fuel consumption
12.1 L/100 km
Highway fuel consumption
8.9 L/100 km
Tailpipe CO₂ emissions
289 g/km
X5 xDrive48i · A6 — source specification details
Vehicle class
Sport utility vehicle
Engine displacement
4.8 L
Cylinders
8
City fuel consumption
17.3 L/100 km
Highway fuel consumption
12.0 L/100 km
Tailpipe CO₂ emissions
343 g/km
Canadian defect investigations
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2010 BMW X5, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2023568 (Engine). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2022095 (Engine). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2020008 (Airbag). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2010 BMW X5.
ENGINE
40
AIR BAGS
35
ELECTRICAL SYSTEM
23
FUEL/PROPULSION SYSTEM
19
ENGINE AND ENGINE COOLING
13
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
23-09
24-03
24-05
24-08
24-12
25-03
25-04
25-05
25-06
25-09
26-07
26-08
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2023-09
1
2024-03
2
2024-05
2
2024-08
3
2024-12
1
2025-03
1
2025-04
1
2025-05
1
2025-06
1
2025-09
1
2026-07
1
2026-08
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
8
25,000–49,999 mi
12
50,000–99,999 mi
37
100,000–149,999 mi
17
150,000+ mi
4
Missing or excluded mileage
46
78 of 124 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged2US complaint allegations
Fire flagged5US complaint allegations
Towed flagged12US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
36 matched manufacturer communications · 1 matched investigations. Communications are not necessarily recalls or technical service bulletins.
RQ18001 · Idler Pulley Bolt Failure
In a May 23, 2018 letter, BMW of North America, LLC (BMW) notified the National Highway Traffic Safety Administration (NHTSA) of a safety defect that may result in the loss of power steering assist in certain model year (MY) 2009 through 2013 BMW X5 xDrive35d vehicles (Recall 18V-336). The recall, which affects approximately 33,214 vehicles built from March 12, 2008 through June 27, 2013, corrects the remedy and expands the scope of a prior BMW recall (12V-550) which addressed idle pulley bolt failure in approximately 29,800 MY 2009 through 2012 BMW X5 xDrive35d vehicles built from September 1, 2008 through November 15, 2012. BMW's analysis indicates that due to a number of contributing factors it is possible that the bolt's pre-stressing force could drop to an extent that it results in the bolt becoming loosened over time. A loosening of the bolt could cause additional bending stress on top of the bolt. As a result, the bolt could break. If this were to happen, then a sudden loss of power steering assist could occur.If there were a loss of power steering assist, manual steering capability would be retained, although the effort required to steer the vehicle would be greater, and therefore may increase the risk of crash.ODI's analysis of the complaints it has received from the public (VOQ's) and BMW complaint data submitted in response to the information request letter for RQ18-001 identified a total of 93 unique VIN reports alleging failure of the idler pulley bolt after recall 12V-550 was completed on the vehicle, including 31 VOQ's and 72 BMW consumer complaints (5 complaints received by NHTSA and BMW, 3 unique VIN's submitted multiple complaints to BMW, and 1 unique VIN submitted multiple complaints to NHTSA).BMW is developing a new idler pulley fastening system as the remedy for 18V-336.The remedy is planned to begin in February 2019.Based on BMW's safety recall, this recall query is closed.The 31 VOQ's referenced in this resume are: 10499780, 10559422, 10579534, 10655424, 10661614, 10702323, 10819617, 10903433, 10948014, 10984353, 11002447, 11010667, 11013643, 11041551, 11054759, 11054909, 11066063, 11083479, 11097562, 11098865, 11113332, 11128649, 11130277, 10552773, 10817406, 10937632, 10956710, 11032006, 11042259, 11063010, 11091513.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.