Open this section to check available listings. No listing request is made until you open it.
Source: Car Handshake and participating dealerships. Year, make and model must match to appear here; trims and specifications can differ. Listings do not establish vehicle condition or recall repair status.
Canadian owner complaints
Coverage, without substituted US totals.
Canadian complaint totals are not available in Recheck’s current dataset. This does not mean there are no complaints.
Canadian recalls come from Transport Canada and efficiency ratings from NRCan. US complaints and bulletins are optional context below; they do not establish Canadian applicability.
Canadian archive snapshot, including historical or superseded records.
Label
Issue:
On certain vehicles, the warning label for the engine block heater cable is written in English only. As a result, a French user may not receive important safety information about how to use the engine block heater. A label that is not provided in both …
Read the complete source summary
Issue:
On certain vehicles, the warning label for the engine block heater cable is written in English only. As a result, a French user may not receive important safety information about how to use the engine block heater. A label that is not provided in both official languages could create confusion.
Safety Risk:
User confusion could increase the risk of injury when trying to use the block heater.
Corrective Actions:
The company will mail each owner a new label for the block heater cable. If you would like help installing the label, you can contact a dealer for assistance.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force tha…
Read the complete source summary
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the driver frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: For the Audi A4, S4, A5 and S5 models, this campaign only affects the Cabriolet versions of these models. Also to Note: This recall supersedes the Audi brand vehicles subject to recall 2016-064 (Audi Recall 69N1) and 2016-065 (69N2). Audi brand vehicles completed under the previous 2016-064 and 2016-065 recalls require repair under this recall, as the previous recall remedy was an interim repair. Interim repair parts must be replaced with final repair parts.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing t…
Read the complete source summary
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver airbag inflator. Note: This only affects the Cabriolet versions of the Audi A4 and S4 models.
On certain vehicles equipped with a 2.0L TDI diesel engine, the fuel injection lines could crack. Diesel fuel leakage may ignite on a hot engine surface and cause a fire, which could result in property damage and/or personal injury. Correction: Dealers will …
Read the complete source summary
On certain vehicles equipped with a 2.0L TDI diesel engine, the fuel injection lines could crack. Diesel fuel leakage may ignite on a hot engine surface and cause a fire, which could result in property damage and/or personal injury. Correction: Dealers will install vibration dampers on all four fuel injection lines. Additionally, on some vehicles (depending on the date of manufacture) the #2 fuel injection line will be replaced.
Model-year recalls do not establish repair completion.
Confirm open recalls with the manufacturer and ask a dealer whether the repairs are complete. Recheck’s VIN decoder identifies the vehicle; it does not provide recall repair status.
Use official test estimates with your own distance and prices.
Scenario estimate, not a live price quote or total cost of ownership. Uses the selected source configuration’s combined test consumption. Weather, speed, battery condition, charging losses, taxes, maintenance, depreciation and insurance can change actual cost. Plug-in hybrids are excluded from this simple calculator because fuel and electricity use depend on charging behaviour. Your inputs stay in your browser.
Coverage boundary: Canadian archive snapshot Exact normalized make/model/year safety matches. Efficiency retains explicitly named source configurations; spelling/configuration differences may exclude records. US complaint counts do not establish Canadian experience or the probability of a defect.
Accident history, current mechanical condition, ownership, liens, individual recall applicability, repair completion and battery health are not established by this model-year report. No failure rate or reliability score is calculated from raw complaint totals.
Specifications & Efficiency
Official source configurations. No trim is assumed.
Source configuration
Fuel / powertrain
Combined efficiency
Range
A3 AS6
Z 2.0 L engine
9.6 L/100 km
Data unavailable
A3 TDI (modified) AS6
D 2.0 L engine
7.4 L/100 km
Data unavailable
A3 M6
Z 2.0 L engine
10.1 L/100 km
Data unavailable
A3 quattro AS6
Z 2.0 L engine
10.0 L/100 km
Data unavailable
Official test estimates vary with configuration, driving and weather. Fuel codes are retained as published; US and Canadian test measures are shown in their source units. Plug-in hybrid source ranges and operating modes are shown separately; they are not added together.
More from the official configuration records
Figures belong to each source configuration. Test conditions and charging assumptions apply; tailpipe emissions exclude fuel and electricity production. No missing specifications are inferred.
Check the current official Transport Canada register.
Canadian investigation records are not imported into this report. Check the official register for affected vehicles, investigation details and current status; no match or status is implied here.
A research brief for the 2011 Audi A3, built from this report.
Record the VIN, market and exact powertrain. Confirm open recalls and completed remedies with the manufacturer.
Ask for repair documentation for campaign 2020353 (Label). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2018059 (Airbag). A model-year match does not establish that this VIN is affected.
Ask for repair documentation for campaign 2016065 (Airbag). A model-year match does not establish that this VIN is affected.
Compare service records with the manufacturer’s schedule and arrange an independent pre-purchase inspection. This checklist is not a diagnosis or an expert inspection.
Optional US contextNHTSA complaints, communications and investigations · not Canadian records
These are US records. Models, equipment, campaigns and driving conditions can differ. Counts are not Canadian complaint totals, verified reviews or reliability ratings.
Reported Problem Categories
US NHTSA complaints for the 2011 Audi A3.
AIR BAGS
20
ENGINE
6
FUEL/PROPULSION SYSTEM
6
ELECTRICAL SYSTEM
4
FUEL SYSTEM, DIESEL
4
US context, not Canadian complaint counts. NHTSA documents known discrepancies in its bulk complaint file. Consumer allegations are not confirmed defects. One complaint can mention several categories. Counts are not failure rates.
Reports Over Time
US complaints by filing month, latest 12 observed months.
17-03
17-04
17-07
17-11
18-08
18-10
18-11
19-02
19-05
20-01
21-07
23-03
A month with no bar is not evidence that no problems occurred. Publication and reporting delays affect totals.
Read chart data
2017-03
3
2017-04
1
2017-07
1
2017-11
1
2018-08
1
2018-10
3
2018-11
1
2019-02
1
2019-05
2
2020-01
1
2021-07
2
2023-03
1
RECHECK EVIDENCE LAB
The mileage lens
Where the available US complaint records fall by reported mileage.
Reported mileage at incident
Matched complaint records
Below 25,000 mi
3
25,000–49,999 mi
9
50,000–99,999 mi
11
100,000–149,999 mi
2
150,000+ mi
0
Missing or excluded mileage
18
25 of 43 matched complaints have positive, usable mileage. Source zero values can represent missing information and are excluded; values above 1.5 million miles are excluded. These are selected allegations with no vehicle-population denominator. The table cannot predict when your vehicle will fail. Mileage is retained in US source miles.
Crash flagged0US complaint allegations
Fire flagged1US complaint allegations
Towed flagged0US complaint allegations
Positive source flags are counted per deduplicated complaint, not verified incidents. Categories and flags can overlap; an unflagged or missing value does not prove an incident did not occur.
Bulletins & Investigations
US official records; applicability in Canada is not established.
370 matched manufacturer communications · 2 matched investigations. Communications are not necessarily recalls or technical service bulletins.
EA11003 · High-Pressure Fuel Pump Failure
The Office of Defects Investgation (ODI) opened EA11-003 on February 7, 2011, based on 160 complaints to ODI and Volkswagen involving high pressure fuel pump (HPFP) failures in model year (MY) 2009 through 2010 Volkswagen Jetta and Golf and Audi A3 TDI vehicles and questions regarding fuel sample results provided by Volkswagen as part of its response to PE10-034.During EA11-003, ODI analyzed design information, field experience and test data for MY 2009 through 2012 Volkswagen Jetta, Golf and Touareg and Audi A3 and Q7 vehicles equipped with TDI engines. Volkswagen has not identified any design or manufacturing defects in the subject TDI Clean Diesel pumps and has stated that the subject pumps were designed, tested and approved for use in the United States market, with substantial design margins for fuels that are out of specification.Volkswagen believes that misfueling with gasoline is the primary cause of HPFP drivetrain failures in the field.Only the Q7 vehicles were built with misfuel protection devices.In May 2013 Volkswagen initiated a service campaign to install misfuel protection devices in all MY 2009 through 2012 Jetta, Golf and A3 vehicles.Volkswagen implemented misfuel protection devices in all of the subject models beginning in MY 2013. ODI?s analysis of HPFP drivetrain failure incidents indicates that most failures do not result in engine stall while driving and, when pump drivetrain failure does result in stall while driving, it is usually preceded by numerous warning symptoms (e.g., glow plug warning lamp, chime, limp mode, and driveability symptoms).The failure data for the subject vehicles show relatively low stalling rates (less than one percent at three years in service) for each of the pump designs used in the subject vehicles.There have been no reports of crashes, injuries or fatalities related to the alleged defect. Based on these facts, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.For additional information, see the closing report in the document file for EA11-003.
By letter dated October 3, 2011, Volkswagen Group of America, Inc. (VW) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall to address a defect in approximately 168,275 model year (MY) 2009-2012 Volkswagen Jetta, Jetta Sportwagen, Golf, and Audi A3 vehicles equipped with the 2.0L TDI Common Rail Clean Diesel engine (NHTSA Recall No. 11V-490).The recalled Jetta and Jetta Sportwagen vehicles were built from May 2008 through September 2011, the Golf vehicles were built from May 2009 through September 2011, and the Audi A3 vehicles were built from September 2009 through September 2011.According to Volkswagen, in U.S. applications of the above cited TDI vehicles including engine codes CJAA and CBEA, the fuel injection pulses could coincide with the natural frequency of the injector line #2 in specific load and RPM conditions.This resonance creates additional stress on the fuel line which a small number of parts (based on the statistic spread of line strength) cannot withstand over its lifetime.As a contributing factor, VW indicated that a supplier used tube material with scratch marks from a grinding process during certain production periods.Lines manufactured in these periods were installed in vehicles produced in the following 10 months:December 2008, January-February 2009, October 2009, March-April 2010 and September-December 2010.Injector lines using this material exhibit a significantly higher failure rate.Dealers will replace injector line #2 in all vehicles built in these months.In addition, as a precautionary measure, all recalled vehicles will have vibration dampers installed on all four fuel injector lines.Analysis of NHTSA complaints, VW complaints, VW field reports and warranty claims found allegations of injector line leakage in 443 subject vehicles.The leaking line was not identified in 62 of the vehicles.For the 381 that did provide information about which injector lines were leaking and/or replaced, 358 (94%) involved an injector line #2 leak/repair.Almost three-quarters of the injector line #2 leak/repair incident vehicles were built in the 10 months identified by VW, which accounted for approximately one-quarter of the recalled vehicles.The failure rate for injector line #2 in vehicles built in the 10 months affected by the supplier line scratching issue is 6.0 incidents per thousand vehicles (IPTV).The failure rate for injector line #2 in other production months of recalled vehicles is 0.8 IPTV.The leak/repair rates for the other injector lines are all well under 1 IPTV.The action taken by Volkswagen is sufficient to resolve the issues raised by this investigation. The agency will continue to monitor this issue and reserves the right to take further action if warranted by the circumstances. Accordingly, this investigation is closed.
Showing up to 8 communication summaries and 4 investigations. Export coverage: communications received 2020–2026 only. Canadian applicability is not inferred. Consult NHTSA for full records.
Sources & Last Updated
Trace the evidence behind this report.
Transport Canada Vehicle Recalls Database · Original source · Evidence updated Nov 17, 2026
US NHTSA complaints · optional US context only · Original source · Retrieved Nov 17, 2026 · Counts deduplicated by ODI number.